enableAnalogSticks not working

[rvera]

Hi, I'm running this example

https://github.com/SukkoPera/PsxNewLib/blob/9b88bdda232b83a1b736be81c6973c0629072ede/examples/PSX2USB/PSX2USB.ino

and enableAnalogSticks fails for me on an official ps2 controller. Any idea of what could be going on?

• Running on a pro micro
• Using 3.3v 500ma as power for the controller as I read online that feeding it the full 5v 1a could hurt my controllers

[SukkoPera]

Are you using 1k pull-ups on CMD and DAT?

[rvera]

you mean if those pins are 5v 1A? Yes, only on the power pin I used some resistances to step down to 3.3v

[SukkoPera]

No, this reminds me again I need to add proper instructions for connecting the controller to the Arduino.

You need to put a 1k resistor between each of DAT, CMD (and ACK) and +3.3V.

[rvera]

That would be awesome, would love to see some official documentation about this

[SukkoPera]

Until I do that, you can follow the schematics of my shield.