extends.md

id	title	sidebar_label
extents	Extents	Extents

The GeoTrellis raster module depends on the vector module to handle the job of describing the scope of real territory (usually in projected units) over which a Tile is representative. Extent is the class which, paired with a Tile, allows us to build a Raster.

Its constructor takes a minimum X, minimum Y, maximum X, and a maximum Y. With these boundaries we can actually fix the corners of an associated Tile and use interpolation to determine mappings from real world coordinates within the provided Extent to values derived from that Tile's cells.

import geotrellis.vector._
val extent = Extent(0, 0, 90, 90)

As discussed in vectors, rather than reinvent the wheel, geotrellis.vector provides conveniences which leverage the great work done in JTS. That fact is apparent here as well: the GeoTrellis Extent is the JTS Envelope.

extent.jtsEnvelope

Extent Reprojection

As implied by the limited input to its constructor, an Extentcan only represent a rectangular region which is aligned with the coordinate system. GeoTrellis provides three different ways to reproject Extents

Naive Reprojection (not recommended)

Naive reprojection of an Extent is very simple but can mislead. As seen in the case of reprojection as a Polygon, Extent shapes can be expected to warp during projection. Imagine turning a rectangle on its diagonal: drawing a rectangle which surrounds this diagonal rectangle but which remains parallel with the original ensures a larger rectangle than the one we turned on its diagonal.

import geotrellis.proj4.{LatLng, WebMercator, Transform}
val transform = Transform(LatLng, WebMercator)
extent.reproject(transform)

Caution is warranted when naively reprojecting an Extent. It can be heuristically useful, but should be relied upon for high precision calculations. Instead, use reprojectAsPolygon if reprojecting only the Extent and cellgrid-aware reprojection if attempting to reproject a gridded space.

Polygon Reprojection (recommended)

Rectangular regions become curvilinear regions after geodetic projection. To see exactly which bits of territory in projection B are covered by an Extent defined for projection A, it should be reprojected as a polygon

extent.reprojectAsPolygon(transform, 0.01)

This method adaptively refines its output. To exit adaptive refinement, a tolerance value is required to define success. In this case, 0.01 specifies the amount of deflection allowed in terms of distance from the original Extent's line to the point which represents it under another projection

CellGrid-Aware Reprojection (recommended)

Reprojection of a gridded space's extent imposes constraints not seen in the above cases. In addition to the needing to accurately capture the transformation of an Extent, this method requires information about the grid of cells which corresponds to said input Extent. This information is used to approximately preserve the pre-reprojection resolution.

They only information in addition to Extent required to compute this kind of reprojection is the resolution. Extent plus resolution yields a GridExtent or a RasterExtent, either of which are suitable for carrying out reprojection of a gridded space. Take note that the CellSize has been transformed in addition to the Extent:

import geotrellis.raster._
val cs = CellSize(1, 1)
val before = GridExtent[Long](extent, cs)
val after = before.reproject(LatLng, WebMercator)