arlec_AWDC001HA

---
date_added: 2020-01-07
title: Arlec Smart 45cm Smart DC Wall
model: AWDC001HA
image: https://media.bunnings.com.au/Product-800x800/5450ca3c-55e0-464a-bad9-09271f304a41.jpg
template: '{"NAME":"Arlec 45cm Fan","GPIO":[0,0,0,0,0,0,0,0,0,108,0,107,0],"FLAG":0,"BASE":54}' 
link: https://www.bunnings.com.au/arlec-45cm-smart-dc-wall-fan-with-grid-connect_p0110424
link2: https://www.bunnings.co.nz/arlec-45cm-smart-dc-wall-fan-with-grid-connect_p00110424
mlink: 
flash: tuya-convert
category: misc
type: Fan
standard: au
---
```console
Backlog TuyaMCU 11,1; TuyaMCU 12,101
```
Used the following rule to detect speed
```console
Rule1 on TuyaReceived#Data=55AA0307000503040001051B do publish2 stat/afan/speed 3,5 endon
on TuyaReceived#Data=55AA0307000503040001041A do publish2 stat/afan/speed 3,4 endon
on TuyaReceived#Data=55AA03070005030400010319 do publish2 stat/afan/speed 3,3 endon
on TuyaReceived#Data=55AA03070005030400010218 do publish2 stat/afan/speed 3,2 endon
on TuyaReceived#Data=55AA03070005030400010117 do publish2 stat/afan/speed 3,1 endon
on TuyaReceived#Data=55AA03070005030400010016 do publish2 stat/afan/speed 3,0 endon
Rule1 1
```

Home Assistant fan.yaml
```yaml
- platform: mqtt
  name: "Arlec Fan"
  state_topic: "stat/afan/POWER1"
  command_topic: "cmnd/afan/POWER1"
  oscillation_state_topic: "stat/afan/POWER2"
  oscillation_command_topic: "cmnd/afan/POWER2"
  speed_state_topic: "stat/afan/speed"
  speed_command_topic: "cmnd/afan/TuyaSend4"
  qos: 0
  payload_on: 'ON'
  payload_off: 'OFF'
  payload_oscillation_on: 'ON'
  payload_oscillation_off: 'OFF'
  payload_low_speed: '3,0'
  payload_medium_speed: '3,2'
  payload_high_speed: '3,5'
  availability_topic: tele/afan/LWT
  payload_available: Online
  payload_not_available: Offline
  speeds:
    - 'off'
    - low
    - medium
    - high
```

The fan has 6 speed, but this component only lets us set to 3 of them.