Skip to content
New issue

Have a question about this project? # for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “#”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? # to your account

Recommend stick for EPON network? #330

Open
dlfrks opened this issue Nov 4, 2024 · 4 comments
Open

Recommend stick for EPON network? #330

dlfrks opened this issue Nov 4, 2024 · 4 comments

Comments

@dlfrks
Copy link

dlfrks commented Nov 4, 2024

I'm not sure which stick to use for EPON networks.
Can ODI DFP-34X-2C2 be used in EPON networks?

@Anime4000
Copy link
Owner

should be possible, just need change the mode

@giovannybm
Copy link

you can use xpon like DFP-34X-2C2, is compatible with xpon, epon

@dlfrks
Copy link
Author

dlfrks commented Nov 16, 2024

I tried EPON network using DFP-34X-2C2 stick.

I used the following command:

flash set ELAN_MAC_ADDR <stock modem's mac address>
flash set MAC_KEY <calculated from mac address>
flash set OUI <first to sixth values ​​of the mac address>
flash set PON_MODE 2

After inserting the fiber it came online for a while and then the mac address was immediately blocked (returning to stock modem also does not work).

Should I get more information from my stock modem?
OMCI_* and PON_VENDOR_ID seem to be used only in GPON, but what other keys are used in EPON?

@vtta
Copy link

vtta commented Jan 21, 2025

flash set ELAN_MAC_ADDR <stock modem's mac address>
flash set MAC_KEY

I am using the HSGQ version of the same stick on a EPON network, and I got it working by filling the MAC address with that of the original modem.
The MAC_KEY is calculated as usual with echo -n "hsgq1.9aMACGOESHERE" | md5sum.
I don't know whether this is strictly required, because after I flashed the IGD mode firmware and did a factory reset the MAC becomes something very weird and I have to change it.

# for free to join this conversation on GitHub. Already have an account? # to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

4 participants