extruder-BMG.cfg

# Needed to swap direction of extruder motor
[extruder]
step_pin: PB3
dir_pin: PB4
enable_pin: !PD1
microsteps: 16
rotation_distance: 24.439
# full_steps_per_rotation: 200
gear_ratio: 50:17
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PC8
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PA0
min_temp: 0
max_temp: 250
pressure_advance: 0.0525

[tmc2209 extruder]
uart_pin: PC11
tx_pin: PC10
uart_address: 3
run_current: 0.650
#stealthchop_threshold: 999999