DAC-EN.c

#include "stm32f10x.h"
Void delay_us (u32 nus);
U16 i;
U16 DAC_DATA; // DAC to write the data
/ ************************************************* *****************************
*
* Function name: DAC_Ch1_Config
* Function: DAC1 configuration
* Enter: None
* Output: None
* Returns: None
************************************************** ***************************** /
Void DAC_Ch1_Config (void)
{
GPIO_InitTypeDef GPIO_InitStructure;
DAC_InitTypeDef DAC_InitStructure;
RCC_APB1PeriphClockCmd (RCC_APB1Periph_DAC, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4; //DAC_OUT1=PA.4
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN; // This pin is in AN mode
GPIO_Init (GPIOA, & GPIO_InitStructure); // Initialize GPIOA with parameters

DAC_InitStructure.DAC_Trigger = DAC_Trigger_Software; // software trigger
DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None; // only voltage output
DAC_InitStructure.DAC_LFSRUnmask_TriangleAmplitude = DAC_TriangleAmplitude_2047;
DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable; // enable output
DAC_Init (DAC_Channel_1, & DAC_InitStructure); // with parameter initial DAC1
DAC_Cmd (DAC_Channel_1, ENABLE); // enable DAC1 pass
DAC_SetChannel1Data (DAC_Align_12b_R, 0x0000); // write the initial value 0
DAC_SoftwareTriggerCmd (DAC_Channel_1, ENABLE); /// Software Trigger Conversions
}


Void DAC1_SET (u16 DAC_Data)
{
DAC_SetChannel1Data (DAC_Align_12b_R, DAC_Data); // write data
DAC_SoftwareTriggerCmd (DAC_Channel_1, ENABLE); // software trigger conversion
}

Void DAC_Config (void)
{
DAC_Ch1_Config (); // DAC1 configuration
DAC_DATA = 0X05FF; // DAC to write the data
DAC1_SET (0X05FF); // write data DAC conversion
}
// while (1)
//
// {
// DAC_DATA = 0X05FF;
// for (i = 0; i <1000; i ++)
// {
// DAC_DATA = DAC_DATA + i;
// DAC1_SET ();
// delay_us (10);
//
//}
//
//
//}













/// **
// ************************************************ ******************************
// * @file DAC / TwoChannels_TriangleWave / main.c
// * @author MCD Application Team
// * @version V3.5.0
// * @date 08-April-2011
// * @brief Main program body.
// ************************************************ ******************************
// * @attention
// *
// * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
// * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
// * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
// * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
// * FROM THE CONTENT OF SUCH FIRMWARE AND / OR THE USE MADE BY CUSTOMERS OF THE
// * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
// *
// * <h2> <center> & copy; COPYRIGHT 2011 STMicroelectronics </ center> </ h2>
// ************************************************ ******************************
// * /
//
/// * Includes --------------------------------------------- --------------------- * /
// # include "stm32f10x.h"
//
/// ** @addtogroup STM32F10x_StdPeriph_Examples
// * @ {
// * /
//
/// ** @addtogroup DAC_TwoChannels_TriangleWave
// * @ {
// * /
//
/// * Private typedef -------------------------------------------- --------------- * /
/// * Private define -------------------------------------------- ---------------- * /
/// * Init Structure definition * /
// DAC_InitTypeDef DAC_InitStructure;
// TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
//
/// * Private macro -------------------------------------------- ----------------- * /
/// * Private variables -------------------------------------------- ------------- * /
/// * Private function prototypes ------------------------------------------- ---- * /
// void RCC_Configuration (void);
// void GPIO_Configuration (void);
// void Delay (__ IO uint32_t nCount);
//
/// * Private functions -------------------------------------------- ------------- * /
//
/// **
// @brief Main program
// * @param None
// * @retval None
// * /
// int main (void)
// {
// / *! <At this stage the microcontroller clock setting is already configured,
// this is done through SystemInit () function which is called from startup
// file (startup_stm32f10x_xx.s) before to branch to application main.
// To reconfigure the default setting of SystemInit () function, refer to
// system_stm32f10x.c file
// * /
//
// / * System Clocks Configuration * /
// RCC_Configuration ();
//
// / * Once the DAC channel is enabled, the corresponding GPIO pin is automatically
// connected to the DAC converter. In order to avoid parasitic consumption,
// the GPIO pin should be configured in analog * /
// GPIO_Configuration ();
//
// / * TIM2 Configuration * /
// TIM_TimeBaseStructInit (& TIM_TimeBaseStructure);
// TIM_TimeBaseStructure.TIM_Period = 0xF;
// TIM_TimeBaseStructure.TIM_Prescaler = 0xF;
// TIM_TimeBaseStructure.TIM_ClockDivision = 0x0;
// TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
// TIM_TimeBaseInit (TIM2, & TIM_TimeBaseStructure);
//
// / * TIM2 TRGO selection * /
// TIM_SelectOutputTrigger (TIM2, TIM_TRGOSource_Update);
//
// / * DAC channel1 Configuration * /
// DAC_InitStructure.DAC_Trigger = DAC_Trigger_T2_TRGO;
// DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_Triangle;
// DAC_InitStructure.DAC_LFSRUnmask_TriangleAmplitude = DAC_TriangleAmplitude_2047;
// DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Disable;
// DAC_Init (DAC_Channel_1, & DAC_InitStructure);
//
// / * DAC channel2 Configuration * /
// DAC_InitStructure.DAC_LFSRUnmask_TriangleAmplitude = DAC_TriangleAmplitude_1023;
// DAC_Init (DAC_Channel_2, & DAC_InitStructure);
//
// / * Enable DAC Channel1: Once the DAC channel1 is enabled, PA.04 is
// automatically connected to the DAC converter. * /
// DAC_Cmd (DAC_Channel_1, ENABLE);
//
// / * Enable DAC Channel2: Once the DAC channel2 is enabled, PA.05 is
// automatically connected to the DAC converter. * /
// DAC_Cmd (DAC_Channel_2, ENABLE);
//
// / * Set DAC dual channel DHR12RD register * /
// DAC_SetDualChannelData (DAC_Align_12b_R, 0x100, 0x100);
//
// / * TIM2 enable counter * /
// TIM_Cmd (TIM2, ENABLE);
//
// while (1)
// {
//}
//}
//
/// **
// * @brief Configures the different system clocks.
// * @param None
// * @retval None
// * /
// void RCC_Configuration (void)
// {
// / * Enable peripheral clocks ------------------------------------------- ----- * /
// / * GPIOA Periph clock enable * /
// RCC_APB2PeriphClockCmd (RCC_APB2Periph_GPIOA, ENABLE);
// / * DAC Periph clock enable * /
// RCC_APB1PeriphClockCmd (RCC_APB1Periph_DAC, ENABLE);
// / * TIM2 Periph clock enable * /
// RCC_APB1PeriphClockCmd (RCC_APB1Periph_TIM2, ENABLE);
//}
//
/// **
// * @brief Configures the different GPIO ports.
// * @param None
// * @retval None
// * /
// void GPIO_Configuration (void)
// {
// GPIO_InitTypeDef GPIO_InitStructure;
//
// / * Once the DAC channel is enabled, the corresponding GPIO pin is automatically
// connected to the DAC converter. In order to avoid parasitic consumption,
// the GPIO pin should be configured in analog * /
// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4 | GPIO_Pin_5;
// GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
// GPIO_Init (GPIOA, & GPIO_InitStructure);
//}
//
/// **
// * @brief Inserts a delay time.
// * @param nCount: specify the delay time length.
// * @retval None
// * /
// void Delay (__ IO uint32_t nCount)
// {
// for (; nCount! = 0; nCount--);
//}
//
// # ifdef USE_FULL_ASSERT
//
/// **
// * @brief Reports the name of the source file and the source line number
// * where the assert_param error has occurred.
// * @param file: pointer to the source file name
// * @param line: assert_param error line source number
// * @retval None
// * /
// void assert_failed (uint8_t * file, uint32_t line)
// {
// / * User can add his own implementation to report the file name and line number,
// ex: printf ("Wrong parameters value: file% s on line% d \ r \ n", file, line) * /
//
// / * Infinite loop * /
// while (1)
// {
//}
//}
//
// # endif
//
/// **
// * @}
// * /
//
/// **
// * @}
// * /
//
/// ******************* (C) COPYRIGHT 2011 STMicroelectronics ***** END OF FILE **** /