From b9de25092549fa04a16d1a9490ebf6e815174487 Mon Sep 17 00:00:00 2001
From: JACK-THINK <JACK-THINK@OUTLOOK.COM>
Date: Sun, 29 Apr 2018 23:36:45 +0800
Subject: [PATCH] Add files via upload

---
 script_bootloader/Entware_install             | 26 ++++++
 script_bootloader/install                     | 48 +++++++++++
 script_bootloader/script_bootloader_usb_mount | 86 +++++++++++++++++++
 .../script_bootloader_usb_umount              | 45 ++++++++++
 script_bootloader/uninstall                   | 37 ++++++++
 .../user_scripts/list_of_user_custom_scripts  | 44 ++++++++++
 .../user_scripts/software/software.service    | 25 ++++++
 script_bootloader/usr/software/software       |  1 +
 8 files changed, 312 insertions(+)
 create mode 100644 script_bootloader/Entware_install
 create mode 100644 script_bootloader/install
 create mode 100644 script_bootloader/script_bootloader_usb_mount
 create mode 100644 script_bootloader/script_bootloader_usb_umount
 create mode 100644 script_bootloader/uninstall
 create mode 100644 script_bootloader/user_scripts/list_of_user_custom_scripts
 create mode 100644 script_bootloader/user_scripts/software/software.service
 create mode 100644 script_bootloader/usr/software/software

diff --git a/script_bootloader/Entware_install b/script_bootloader/Entware_install
new file mode 100644
index 00000000..64e42534
--- /dev/null
+++ b/script_bootloader/Entware_install
@@ -0,0 +1,26 @@
+#!/bin/sh
+#
+logger -st "($(basename $0))" $$ "*--------- ENTWARE FOR ASUS ROUTER INSTALLATION ---------*"
+#
+########## INSTALLATION PREPARATION ##########
+#
+# Check type of the ASUS Router
+# 检查华硕路由器型号
+router_type=$(nvram get model)
+#
+# Install Entware according to the type of the ASUS Router
+# 安装适合于特定型号路由器的Entware版本
+if [ $router_type == 'RT-AC68U' ] || [ $router_type == 'RT-AC56U' ] || [ $router_type == 'RT-AC87U' ] || [ $router_type == 'RT-AC3200' ] || [ $router_type == 'RT-AC88U' ] || [ $router_type == 'RT-AC3100' ] || [ $router_type == 'RT-AC5300' ]
+then
+    wget -O - http://bin.entware.net/armv7sf-k2.6/installer/generic.sh | sh
+fi
+#
+if [ $router_type == 'RT-AC86U' ]
+then
+    wget -O - http://bin.entware.net/aarch64-k3.10/installer/generic.sh | sh
+fi
+#
+if [ $router_type == 'RT-AC66U' ] || [ $router_type == 'RT-N66U' ] || [ $router_type == 'RT-N16' ]
+then
+    wget -O - http://pkg.entware.net/binaries/mipsel/installer/installer.sh | sh
+fi
\ No newline at end of file
diff --git a/script_bootloader/install b/script_bootloader/install
new file mode 100644
index 00000000..308384c0
--- /dev/null
+++ b/script_bootloader/install
@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# 此脚本用于安装“华硕路由器开机自动运行脚本系统”
+#
+logger -st "($(basename $0))" $$ "*--------- SCRIPTS BOOTLOADER FOR ASUS ROUTER INSTALLATION ---------*"
+#
+########## ROUTER CONFIGURATION ##########
+#
+# Check if /tmp/mnt/sda1/script_bootloader/script_bootloader_usb_mount and /tmp/mnt/sda1/script_bootloader/script_bootloader_usb_umount exist
+# 检查/tmp/mnt/sda1/script_bootloader/script_bootloader_usb_mount和/tmp/mnt/sda1/script_bootloader/script_bootloader_usb_umount文件是否存在
+if [ -e "/tmp/mnt/sda1/script_bootloader/script_bootloader_usb_mount" ] && [ -e "/tmp/mnt/sda1/script_bootloader/script_bootloader_usb_umount" ]
+then
+    logger -st "($(basename $0))" $$ "***** ALL THE ESSENTIAL FILES EXIST *****"
+    logger -st "($(basename $0))" $$ "***** SETTING THE ROUTER *****"
+    #
+    # Set nvram variable "script_usbmount" and "script_usbumount"
+    # 如果两个文件都存在，则设置nvram变量script_usbmount和script_usbumount
+    #
+    # When a flash disk is mounted, the script "script_bootloader_usb_mount" will run automatically
+    # 当U盘被挂载后，脚本script_bootloader_usb_mount会自动运行
+    # 使用nvram对变量script_usbmount进行设置。当U盘被挂载后，任何被该变量引用的可执行脚本会自动执行。本例中，设置该变量引用脚本/tmp/mnt/sda1/script_bootloader/script_bootloader_usb_mount
+    nvram set script_usbmount="/tmp/mnt/sda1/script_bootloader/script_bootloader_usb_mount"
+    #
+    # When a flash disk is unmounted, the script "script_bootloader_usb_umount" will run automatically
+    # 当U盘被卸载前，脚本script_bootloader_usb_umount会自动运行
+    # 使用nvram对变量script_usbumount进行设置。当U盘被卸载前，任何被该变量引用的可执行脚本会自动执行。本例中，设置该变量引用脚本/tmp/mnt/sda1/script_bootloader/script_bootloader_usb_umount
+    nvram set script_usbumount="/tmp/mnt/sda1/script_bootloader/script_bootloader_usb_umount"
+    #
+    # Commit the changes
+    # 使用nvram命令对路由器进行设置后，必须执行nvram commit命令，才能将已作出的修改保存至路由器
+    nvram commit
+    logger -st "($(basename $0))" $$ "***** INSTALLATION HAS BEEN COMPLETE *****"
+    #
+    # Reboot the router
+    # 需使用reboot命令重启路由器，确保设置生效
+    logger -st "($(basename $0))" $$ "***** REBOOTING THE ROUTER *****"
+    reboot
+    #
+else
+    # Stop and Exit
+    # 如果两个文件不同时存在，则该脚本终止
+    logger -st "($(basename $0))" $$ "***** UNABLE TO LOCATE THE ESSENTIAL FILES *****"
+    logger -st "($(basename $0))" $$ "***** INSTALLATION HAS NOT BEEN COMPLETE *****"
+    logger -st "($(basename $0))" $$ "***** EXIT *****"
+    exit 1
+fi
+#
+########## END ##########
\ No newline at end of file
diff --git a/script_bootloader/script_bootloader_usb_mount b/script_bootloader/script_bootloader_usb_mount
new file mode 100644
index 00000000..7102d170
--- /dev/null
+++ b/script_bootloader/script_bootloader_usb_mount
@@ -0,0 +1,86 @@
+#!/bin/sh
+#
+# 此脚本用于在确认路由器已经成功启动后，执行用户自定义脚本列表，并准备Entware运行环境
+#
+logger -st "($(basename $0))" $$ "***** BOOTING UP ASUS ROUTER (300 SECONDS) *****"
+#
+########## CHECK ASUS ROUTER STATUS ##########
+#
+# Check if the router is ready for running user's custom scripts
+# 检查路由器是否已经准备好执行用户自定义脚本
+#
+# Check it out every 30 seconds in 5 minutes.
+# 每30秒检查1次，最多执行10次，最多用时5分钟
+i=1
+while [ $i -le 10 ]
+do
+    success_start_service=`nvram get success_start_service`
+    if [ "$success_start_service" == "1" ]
+    then
+        logger -st "($(basename $0))" $$ "***** ASUS ROUTER IS READY *****"
+        break
+    fi
+    i=$(($i+1))
+    logger -st "($(basename $0))" $$ "***** ASUS ROUTER IS NOT READY, WAIT 30 SECONDS MORE *****"
+    sleep 30
+done
+#
+# Stop and Exit
+# 如果10次检查均为路由器没准备好执行脚本，则该脚本终止
+if [ "$success_start_service" != "1" ]
+then
+    logger -st "($(basename $0))" $$ "***** ASUS ROUTER IS NOT READY *****"
+    logger -st "($(basename $0))" $$ "***** EXIT *****"
+    exit 1
+fi
+#
+########## END ##########
+#
+#
+########## LOCATE AND LOAD THE LIST OF USER'S CUSTOM SCRIPTS ##########
+#
+# Check if /tmp/mnt/sda1/script_bootloader/user_scripts/list_of_user_custom_scripts exists
+# 检查用户自定义脚本列表（本例中，该脚本为/tmp/mnt/sda1/script_bootloader/user_scripts/list_of_user_custom_scripts exists）是否存在
+if [ -e "/tmp/mnt/sda1/script_bootloader/user_scripts/list_of_user_custom_scripts" ]
+then
+    logger -st "($(basename $0))" $$ "***** LIST OF USER'S CUSTOM SCRIPTS EXISTS *****"
+    # Load user's custom scripts
+    # 如果用户自定义脚本列表存在，则执行该脚本
+    logger -st "($(basename $0))" $$ "***** LOAD USER'S CUSTOM SCRIPTS *****"
+    /tmp/mnt/sda1/script_bootloader/user_scripts/list_of_user_custom_scripts
+    #
+else
+    # Stop and Exit
+    # 如果用户自定义脚本列表不存在，则该脚本终止
+    logger -st "($(basename $0))" $$ "***** UNABLE TO LOCATE LIST OF USER'S CUSTOM SCRIPTS *****"
+    logger -st "($(basename $0))" $$ "***** EXIT *****"
+    exit 2
+fi
+#
+########## END ##########
+#
+#
+########## LOCATE AND ENABLE ENTWARE ##########
+#
+# Prepare the environment for Entware
+# 准备Entware运行环境
+ln -sf /tmp/mnt/sda1 /tmp/opt
+#
+# Check if /opt/etc/init.d/rc.unslung exists
+# 检查文件/opt/etc/init.d/rc.unslung是否存在
+if [ -e '/opt/etc/init.d/rc.unslung' ]
+then
+    # Start /opt/etc/init.d/rc.unslung
+    # 如果文件/opt/etc/init.d/rc.unslung存在，则执行
+    /opt/etc/init.d/rc.unslung start
+    logger -st "($(basename $0))" $$ "***** ENTWARE HAS BEEN ENABLED *****"
+    #
+else
+    # Stop and Exit
+    # 如果文件/opt/etc/init.d/rc.unslung不存在，则该脚本终止
+    logger -st "($(basename $0))" $$ "***** ENTWARE CAN NOT BE ENABLED *****"
+    logger -st "($(basename $0))" $$ "***** EXIT *****"
+    exit 3
+fi
+#
+########## END ##########
\ No newline at end of file
diff --git a/script_bootloader/script_bootloader_usb_umount b/script_bootloader/script_bootloader_usb_umount
new file mode 100644
index 00000000..f7074dbb
--- /dev/null
+++ b/script_bootloader/script_bootloader_usb_umount
@@ -0,0 +1,45 @@
+#!/bin/sh
+#
+# 此脚本在卸载U盘前，强制结束从U盘中加载的可执行程序的进程，并消除Entware运行环境，防止卸载U盘失败
+#
+logger -st "($(basename $0))" $$ "***** UMOUNT THE USB FLASH DRIVE *****"
+#
+########## KILL ALL THE RELEVANT PROCESSES ##########
+#
+logger -st "($(basename $0))" $$ "***** KILL ALL THE RELEVANT PROCESSES *****"
+#
+# Kill all the relevant processes
+# 结束全部从U盘中加载的可执行程序的进程（本例中，该可执行程序为/tmp/mnt/sda1/script_bootloader/usr/software/software）
+#
+# Kill /tmp/mnt/sda1/script_bootloader/usr/software/software
+# 结束进程/tmp/mnt/sda1/script_bootloader/usr/software/software，使用时，删除下一行行首的#
+#ps | grep "/tmp/mnt/sda1/script_bootloader/usr/software/software" | grep -v 'grep' | awk '{print $1}' | xargs kill
+# Kill next process
+# 结束下一个进程XXXXX（假定该可执行程序为/tmp/mnt/sda1/script_bootloader/usr/XXXXX/XXXXX），使用时，删除下一行行首的#
+#ps | grep "/tmp/mnt/sda1/script_bootloader/usr/XXXXX/XXXXX" | grep -v 'grep' | awk '{print $1}' | xargs kill
+#
+logger -st "($(basename $0))" $$ "***** ALL THE RELEVANT PROCESSES HAVE BEEN KILLED *****"
+#
+########## END ##########
+#
+#
+########## DISABLE ENTWARE ##########
+#
+# Check if /opt/etc/init.d/rc.unslung exists
+# 检查文件/opt/etc/init.d/rc.unslung是否存在
+if [ -e '/opt/etc/init.d/rc.unslung' ]
+then
+    # Stop /opt/etc/init.d/rc.unslung
+    # 如果文件/opt/etc/init.d/rc.unslung存在，则执行
+    /opt/etc/init.d/rc.unslung stop
+    logger -st "($(basename $0))" $$ "***** ENTWARE HAS BEEN DISABLED *****"
+    #
+else
+    # Stop and Exit
+    # 如果文件/opt/etc/init.d/rc.unslung不存在，则该脚本终止
+    logger -st "($(basename $0))" $$ "***** ENTWARE CAN NOT BE DISABLED *****"
+    logger -st "($(basename $0))" $$ "***** EXIT *****"
+    exit 1
+fi
+#
+########## END ##########
\ No newline at end of file
diff --git a/script_bootloader/uninstall b/script_bootloader/uninstall
new file mode 100644
index 00000000..3d5b3e4e
--- /dev/null
+++ b/script_bootloader/uninstall
@@ -0,0 +1,37 @@
+#!/bin/sh
+#
+# 此脚本用于卸载“华硕路由器开机自动运行脚本系统”
+#
+logger -st "($(basename $0))" $$ "*--------- SCRIPTS BOOTLOADER FOR ASUS ROUTER UNINSTALLATION ---------*"
+#
+########## TERMINATE ANYTHING RELATED ##########
+#
+# Load /tmp/mnt/sda1/script_bootloader/script_bootloader_usb_umount
+# 加载/tmp/mnt/sda1/script_bootloader/script_bootloader_usb_umount
+/tmp/mnt/sda1/script_bootloader/script_bootloader_usb_umount
+logger -st "($(basename $0))" $$ "***** ANYTHING RELATED HAS BEEN TERMINATED *****"
+#
+########## END ##########
+#
+#
+########## ROUTER CONFIGURATION ##########
+#
+logger -st "($(basename $0))" $$ "***** RESTORE ASUS ROUTER SETTINGS *****"
+#
+# When a USB flash Drive is mounted, nothing will run automatically
+# 使用nvram对变量script_usbmount进行设置，将其恢复为默认状态
+nvram unset script_usbmount
+#
+# When a USB flash Drive is unmounted, nothing will run automatically
+# 使用nvram对变量script_usbumount进行设置，将其恢复为默认状态
+nvram unset script_usbumount
+#
+# Commit the changes
+# 使用nvram命令对路由器进行设置后，必须执行nvram commit命令，才能将已作出的修改保存至路由器
+nvram commit
+#
+# Reboot the router
+# 需使用reboot命令重启路由器，设置才能生效
+reboot
+#
+########## END ##########
\ No newline at end of file
diff --git a/script_bootloader/user_scripts/list_of_user_custom_scripts b/script_bootloader/user_scripts/list_of_user_custom_scripts
new file mode 100644
index 00000000..5ee9f183
--- /dev/null
+++ b/script_bootloader/user_scripts/list_of_user_custom_scripts
@@ -0,0 +1,44 @@
+#!/bin/sh
+#
+# 此脚本为用户自定义脚本列表，可按使用需求修改第15-28行
+#
+########## SET THE CUSTOM ENVIRONMENT VARIABLES ##########
+#
+# 设置环境变量（本例中，该环境变量为ADMINUSER）
+#
+# ADMINUSER: The admin user of this router.
+# 设置环境变量ADMINUSER为路由器的后台登陆用户名（本例中，用户名为routeradmin）
+logger -st "($(basename $0))" $$ "***** SET CUSTOM ENVIRONMENT VARIABLES *****"
+export ADMINUSER='routeradmin'
+#
+########## END ##########
+#
+#
+########## LIST OF USER'S CUSTOM SCRIPTS ##########
+#
+# 用户自定义脚本列表（遵循下述格式）
+#
+# 脚本名
+# 可执行脚本文件的绝对路径
+#
+# 例如：
+# SOFTWARE SERVICE（使用时，删除下一行行首的#）
+#/tmp/mnt/sda1/script_bootloader/user_scripts/software/software.service
+#
+# NEXT SERVICE
+#/tmp/mnt/sda1/script_bootloader/user_scripts/
+#
+########## END ##########
+#
+#
+########## UNSET THE CUSTOM ENVIRONMENT VARIABLES ##########
+#
+# 当所有用户自定义脚本加载后，取消之前设定的环境变量ADMINUSER
+#
+logger -st "($(basename $0))" $$ "***** UNSET CUSTOM ENVIRONMENT VARIABLES *****"
+unset ADMINUSER
+#
+########## END ##########
+#
+#
+logger -st "($(basename $0))" $$ "***** ALL THE USER'S CUSTOM SCRIPTS HAVE BEEN LOADED SUCCESSFULLY *****"
\ No newline at end of file
diff --git a/script_bootloader/user_scripts/software/software.service b/script_bootloader/user_scripts/software/software.service
new file mode 100644
index 00000000..ce51c957
--- /dev/null
+++ b/script_bootloader/user_scripts/software/software.service
@@ -0,0 +1,25 @@
+#!/bin/sh
+#
+logger -st "($(basename $0))" $$ "*--------- SOFTWARE SERVICE ---------*"
+#
+########## CHECK AND ENABLE SOFTWARE ##########
+#
+# Check if the software exists
+# 检查所需外部程序是否存在（本例中，外部程序为/tmp/mnt/sda1/script_bootloader/usr/software/software）（使用时，删除下列所有行行首的#）
+#if [ -e "/tmp/mnt/sda1/script_bootloader/usr/software/software" ]
+#then
+#    logger -st "($(basename $0))" $$ "***** SOFTWARE EXISTS *****"
+#    # Load user's custom scripts
+#    # 如果外部程序存在，则执行该程序
+#    /tmp/mnt/sda1/script_bootloader/usr/software/software
+#    logger -st "($(basename $0))" $$ "***** SOFTWARE SERVICE HAS BEEN LOADED *****"
+#    #
+#else
+#    # Stop and Exit
+#    # 如果外部程序不存在，则该脚本终止
+#    logger -st "($(basename $0))" $$ "***** UNABLE TO LOCATE SOFTWARE KMS SERVER *****"
+#    logger -st "($(basename $0))" $$ "***** EXIT *****"
+#    exit 1
+#fi
+#
+########## END ##########
\ No newline at end of file
diff --git a/script_bootloader/usr/software/software b/script_bootloader/usr/software/software
new file mode 100644
index 00000000..192717b3
--- /dev/null
+++ b/script_bootloader/usr/software/software
@@ -0,0 +1 @@
+# 引用software仅为说明本系统的使用方法
\ No newline at end of file