How to change 12.79°C / 24.21°C to full 13°C / 24°C

[bsylwek]

Hello
How to change 12.79°C / 24.21°C to full 13°C / 24°C ?
SP WEATHER 4.0.1
Joomla 4.3.2

[SteponasK]

ChatGPT response:

It seems like you want to change the displayed temperature values in your Joomla website from the format "12.79°C / 24.21°C" to "13°C / 24°C" using the SP Weather 4.0.1 extension. Here's a general guide on how to achieve this:

1. Access Joomla Administrator:

   • Log in to your Joomla website's administrator backend.

2. Navigate to SP Weather Settings:

   • Go to the Joomla administrator panel.
   • Click on "Components" in the top menu.
   • Select "SP Weather" or a similar option depending on your extension's name.

3. Configure Temperature Display:

   • Inside the SP Weather extension settings, look for options related to temperature display or formatting. This can usually be found in the "Options" or "Settings" section.

4. Adjust Temperature Formatting:

   • In the temperature display or formatting settings, you might find options to customize how temperatures are shown.
   • You will want to change the decimal places for temperature values to zero so that they display as whole numbers.
   • You may also find options to specify the temperature unit (e.g., °C) which you can set to your preference.

5. Save Changes:

   • After making the necessary changes, save your settings.

6. Clear Cache:

   • Clear the Joomla cache to ensure that the changes take effect immediately.

7. Check the Frontend:

   • Visit your Joomla website's frontend to verify that the temperature is now displayed in the desired format (e.g., "13°C / 24°C").

Please note that the specific steps and options may vary depending on the exact configuration and version of the SP Weather extension you are using. Be sure to consult the documentation or support resources for SP Weather 4.0.1 if you encounter any difficulties or if the options are not where they are expected to be.

Also, make sure you have a backup of your website before making significant changes to settings in case you need to revert to a previous configuration.