docker-compose.yaml

version: '2'

volumes:
  com_skraukosaur_org0_ca__volume:
  com_skraukosaur_org0_peer0__volume:
  com_skraukosaur_org0_peer1__volume:

  com_skraukosaur_org1_ca__volume:
  com_skraukosaur_org1_peer0__volume:
  com_skraukosaur_org1_peer1__volume:

  #com_skraukosaur_org2_ca__volume:
  com_skraukosaur_org2_orderer__volume:

  com_skraukosaur_www__config_volume:
  com_skraukosaur_www__home_volume:
  com_skraukosaur_www__node_modules_volume:

services:

  ca.org0.skraukosaur.com:
    container_name: ca.org0.skraukosaur.com
    extends:
      file: docker/ca-base.yaml
      service: ca-base
    volumes:
      # This is the persistent storage volume for the CA.
      - com_skraukosaur_org0_ca__volume:/var/hyperledger/ca:rw
    # This is not necessary -- just a little self-documenting hint that this service is being offered on port 7054
    ports:
      - 7054:7054

  ca.org1.skraukosaur.com:
    container_name: ca.org1.skraukosaur.com
    extends:
      file: docker/ca-base.yaml
      service: ca-base
    volumes:
      # This is the persistent storage volume for the CA.
      - com_skraukosaur_org0_ca__volume:/var/hyperledger/ca:rw
    # This is really only necessary if you want to access this service from the host.
    # Configurations within these docker-compose services should just use the native port 7054 (since
    # each service has its own IP address).  In particular, within the docker services, this
    # service is available on address ca.org1.skraukosaur.com:7054
    ports:
      - 8054:7054

  orderer.org2.skraukosaur.com:
    container_name: orderer.org2.skraukosaur.com
    image: hyperledger/fabric-orderer:x86_64-1.0.1
    environment:
      - FABRIC_CFG_PATH=/var/hyperledger/orderer
      - ORDERER_GENERAL_LOGLEVEL=$GENERAL_LOGGING_LEVEL
      - ORDERER_MSP_LOGLEVEL=DEBUG
      - ORDERER_GENERAL_LISTENADDRESS=0.0.0.0

      - ORDERER_GENERAL_GENESISMETHOD=file
      - ORDERER_GENERAL_GENESISFILE=/var/hyperledger/orderer/orderer.genesis.block
      - ORDERER_GENERAL_LOCALMSPID=Org2MSP
      - ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp

      - ORDERER_GENERAL_TLS_ENABLED=$TLS_ENABLED
      - ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric
    command: orderer
    volumes:
      - com_skraukosaur_org2_orderer__volume:/var/hyperledger/orderer:rw
    ports:
      - 7050:7050

  peer0.org0.skraukosaur.com:
    container_name: peer0.org0.skraukosaur.com
    extends:
      file: docker/peer-base.yaml
      service: peer-base
    environment:
      - CORE_LOGGING_LEVEL=$GENERAL_LOGGING_LEVEL
      - CORE_PEER_ID=peer0.org0.skraukosaur.com
      - CORE_PEER_ADDRESS=peer0.org0.skraukosaur.com:7051
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org0.skraukosaur.com:7051
      - CORE_PEER_LOCALMSPID=Org0MSP
    volumes:
      - com_skraukosaur_org0_peer0__volume:/var/hyperledger/peer:rw
    ports:
      - 7051:7051
      - 7053:7053

  peer1.org0.skraukosaur.com:
    container_name: peer1.org0.skraukosaur.com
    extends:
      file: docker/peer-base.yaml
      service: peer-base
    environment:
      - CORE_LOGGING_LEVEL=$GENERAL_LOGGING_LEVEL
      - CORE_PEER_ID=peer1.org0.skraukosaur.com
      - CORE_PEER_ADDRESS=peer1.org0.skraukosaur.com:7051
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org0.skraukosaur.com:7051
      - CORE_PEER_LOCALMSPID=Org0MSP
    volumes:
      - com_skraukosaur_org0_peer1__volume:/var/hyperledger/peer:rw
    # This is really only necessary if you want to access this service from the host.
    # Configurations within these docker-compose services should just use the native ports (since
    # each service has its own IP address).  In particular, within the docker services, this
    # service is available on address peer1.org0.skraukosaur.com:7051 (and 7053)
    ports:
      - 7056:7051
      - 7058:7053

  peer0.org1.skraukosaur.com:
    container_name: peer0.org1.skraukosaur.com
    extends:
      file: docker/peer-base.yaml
      service: peer-base
    environment:
      - CORE_PEER_ID=peer0.org1.skraukosaur.com
      - CORE_PEER_ADDRESS=peer0.org1.skraukosaur.com:7051
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.skraukosaur.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
    volumes:
      - com_skraukosaur_org1_peer0__volume:/var/hyperledger/peer:rw
    # This is really only necessary if you want to access this service from the host.
    # Configurations within these docker-compose services should just use the native ports (since
    # each service has its own IP address).  In particular, within the docker services, this
    # service is available on address peer0.org1.skraukosaur.com:7051 (and 7053)
    ports:
      - 8051:7051
      - 8053:7053

  peer1.org1.skraukosaur.com:
    container_name: peer1.org1.skraukosaur.com
    extends:
      file: docker/peer-base.yaml
      service: peer-base
    environment:
      - CORE_LOGGING_LEVEL=$GENERAL_LOGGING_LEVEL
      - CORE_PEER_ID=peer1.org1.skraukosaur.com
      - CORE_PEER_ADDRESS=peer1.org1.skraukosaur.com:7051
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org1.skraukosaur.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
    volumes:
      - com_skraukosaur_org1_peer1__volume:/var/hyperledger/peer:rw
    # This is really only necessary if you want to access this service from the host.
    # Configurations within these docker-compose services should just use the native ports (since
    # each service has its own IP address).  In particular, within the docker services, this
    # service is available on address peer1.org1.skraukosaur.com:7051 (and 7053)
    ports:
      - 8056:7051
      - 8058:7053

  webserver:
    container_name: www.skraukosaur.com
    image: www.skraukosaur.com-env:v0.0
    build:
        context: .
        dockerfile: docker/www.skraukosaur.com-env:v0.0.Dockerfile
    working_dir: /var/hyperledger/www
    environment:
      # This is what enables full debug output in the fabric-sdk-node modules.
      - 'HFC_LOGGING={"debug":"console"}'
      ## This uses the level specified by the GENERAL_LOGGING_LEVEL env var.
      #- 'HFC_LOGGING={"$GENERAL_LOGGING_LEVEL":"console"}'
      # This var is needed by node-gyp; it points at the python2 bin installed within the www.skraukosaur.com-env:v0.0 docker image.
      - PYTHON=python2.7
      - TLS_ENABLED=$TLS_ENABLED
    # The copying package.json into . is so that the node_modules dir is created within com_skraukosaur_www__home_volume
    command: |
      bash -x -c "
        cp ${COMPOSE_PROJECT_NAME}/web/server/package.json . && \
        npm install && \
        cd ${COMPOSE_PROJECT_NAME}/web/server && \
        npm start
      "
        #npm test
    ports:
      - 3000:3000
    volumes:
      # This is to contain and persist the webserver keystore
      - com_skraukosaur_www__home_volume:/var/hyperledger/www:rw
      # This is to contain and persist node_modules
      - com_skraukosaur_www__node_modules_volume:/var/hyperledger/www/node_modules:rw
      # Mount the volume with config/crypto materials (this probably has to be mounted after /var/hyperledger/www)
      - com_skraukosaur_www__config_volume:/var/hyperledger/www/config:ro
      # Mount this project's files.  TODO: Mount only the minimal necessary files (move necessary certs to under web/server)
      - .:/var/hyperledger/www/${COMPOSE_PROJECT_NAME}:ro
    depends_on:
      - ca.org0.skraukosaur.com
      - ca.org1.skraukosaur.com
      - orderer.org2.skraukosaur.com
      - peer0.org0.skraukosaur.com
      - peer1.org0.skraukosaur.com
      - peer0.org1.skraukosaur.com
      - peer1.org1.skraukosaur.com