digiin2

---

DIGI IN 2 Click

DIGI IN 2 Click demo application is developed using the NECTO Studio, ensuring compatibility with mikroSDK's open-source libraries and tools. Designed for plug-and-play implementation and testing, the demo is fully compatible with all development, starter, and mikromedia boards featuring a mikroBUS™ socket.

---

Click Library

• Author : Stefan Ilic
• Date : Dec 2023.
• Type : SPI type

Software Support

Example Description

This example demonstrates the use of DIGI IN 2 Click board by reading and displaying the state of the channels.

Example Libraries

• MikroSDK.Board
• MikroSDK.Log
• Click.DIGIIN2

Example Key Functions

• digiin2_cfg_setup Config Object Initialization function.

void digiin2_cfg_setup ( digiin2_cfg_t *cfg );

• digiin2_init Initialization function.

err_t digiin2_init ( digiin2_t *ctx, digiin2_cfg_t *cfg );

• digiin2_default_cfg Click Default Configuration function.

err_t digiin2_default_cfg ( digiin2_t *ctx );

• digiin2_get_flt_pin This function is used to get state of the FLT pin.

uint8_t digiin2_get_flt_pin ( digiin2_t *ctx );

• digiin2_write_reg This function is used to write data into the selected register by using SPI serial interface.

err_t digiin2_write_reg ( digiin2_t *ctx, uint8_t reg, uint8_t data_in );

• digiin2_read_reg This function reads a data byte from the selected register by using SPI serial interface.

err_t digiin2_read_reg ( digiin2_t *ctx, uint8_t reg, uint8_t *data_out );

Application Init

Initializes the driver, performs the Click default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;  /**< Logger config object. */
    digiin2_cfg_t digiin2_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    digiin2_cfg_setup( &digiin2_cfg );
    DIGIIN2_MAP_MIKROBUS( digiin2_cfg, MIKROBUS_1 );
    if ( SPI_MASTER_ERROR == digiin2_init( &digiin2, &digiin2_cfg ) )
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( DIGIIN2_ERROR == digiin2_default_cfg ( &digiin2 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
    
    log_info( &logger, " Application Task " );
}

Application Task

Reads and displays on the USB UART the channel state every second.

void application_task ( void )
{    
    uint8_t channel_data = 0;

    digiin2_pulse_latch( &digiin2 );

    if ( DIGIIN2_OK == digiin2_read_reg( &digiin2, DIGIIN2_REG_DISTATE, &channel_data ) )
    {
        if ( channel_data & DIGIIN2_CHANNEL_1_MASK )
        {
            log_printf( &logger, "Channel 1 counter: HIGH \r\n" );
        }
        else
        { 
            log_printf( &logger, "Channel 1 counter: LOW \r\n" );
        }
        if ( channel_data & DIGIIN2_CHANNEL_2_MASK )
        {
            log_printf( &logger, "Channel 2 counter: HIGH \r\n" );
        }
        else
        { 
            log_printf( &logger, "Channel 2 counter: LOW \r\n" );
        }
        if ( channel_data & DIGIIN2_CHANNEL_3_MASK )
        {
            log_printf( &logger, "Channel 3 counter: HIGH \r\n" );
        }
        else
        { 
            log_printf( &logger, "Channel 3 counter: LOW \r\n" );
        }
        if ( channel_data & DIGIIN2_CHANNEL_4_MASK )
        {
            log_printf( &logger, "Channel 4 counter: HIGH \r\n" );
        }
        else
        { 
            log_printf( &logger, "Channel 4 counter: LOW \r\n" );
        }
        if ( channel_data & DIGIIN2_CHANNEL_5_MASK )
        {
            log_printf( &logger, "Channel 5 counter: HIGH \r\n" );
        }
        else
        { 
            log_printf( &logger, "Channel 5 counter: LOW \r\n" );
        }
        if ( channel_data & DIGIIN2_CHANNEL_6_MASK )
        {
            log_printf( &logger, "Channel 6 counter: HIGH \r\n" );
        }
        else
        { 
            log_printf( &logger, "Channel 6 counter: LOW \r\n" );
        }
        if ( channel_data & DIGIIN2_CHANNEL_7_MASK )
        {
            log_printf( &logger, "Channel 7 counter: HIGH \r\n" );
        }
        else
        { 
            log_printf( &logger, "Channel 7 counter: LOW \r\n" );
        }
        if ( channel_data & DIGIIN2_CHANNEL_8_MASK )
        {
            log_printf( &logger, "Channel 8 counter: HIGH \r\n" );
        }
        else
        { 
            log_printf( &logger, "Channel 8 counter: LOW \r\n" );
        }
        log_printf( &logger, "- - - - - - - - - - - - - -\r\n" );
    }
    else
    {
        log_error( &logger, " Read error." );
    }
    
    if ( DIGIIN2_PIN_STATE_HIGH == digiin2_get_flt_pin( &digiin2 ) )
    {
        uint8_t flt_data = 0;
        digiin2_read_reg( &digiin2, DIGIIN2_REG_FAULT, &flt_data );
        log_printf( &logger, "Fault1 data: 0x%.2X \r\n", ( uint16_t ) flt_data );
        digiin2_read_reg( &digiin2, DIGIIN2_REG_FAULT2, &flt_data );
        log_printf( &logger, "Fault2 data: 0x%.2X \r\n", ( uint16_t ) flt_data );
        log_printf( &logger, "- - - - - - - - - - - - - -\r\n" );
    }

    Delay_ms ( 1000 );
}

Application Output

This Click board can be interfaced and monitored in two ways:

• Application Output - Use the "Application Output" window in Debug mode for real-time data monitoring. Set it up properly by following this tutorial.
• UART Terminal - Monitor data via the UART Terminal using a USB to UART converter. For detailed instructions, check out this tutorial.

Additional Notes and Information

The complete application code and a ready-to-use project are available through the NECTO Studio Package Manager for direct installation in the NECTO Studio. The application code can also be found on the MIKROE GitHub account.

---