Navigation

BtnCmd Navigation

The image above shows the main BtnCmd screen with an example configuration. In normal use the main window is split into 2 sections. The Tabs & Buttons section, and the webcam section (optional per tab). Buttons and Tabs can be configured in Edit Mode.

Plugin Settings

Access to the main plugin settings is via the plugin settings bar in the bottom right of the screen

The three buttons are as follows (left to right):

1. Backup & Restore Settings
2. Event Settings (Optional - only shown if Events are enabled)
3. Plugin Global Settings

Edit Mode

Edit mode is where you configure the buttons and tabs and enable/disable webcam. It can be enabled by clicking the edit mode button

In Edit mode you will be presented with the following additional buttons

The buttons are (from left to right):

1. Edit Current Tab Settings
2. Clone Current Tab - Make a new copy of the currently selected tab.
3. Add A New Tab
4. Delete Current Tab - (Only available if all Buttons are removed from tab)
5. Add a new Button to the Current Tab
6. Save Changes and close Edit Mode
7. Undo Changes and close Edit Mode

When in edit mode each button on the current tab will change to look like the image below:

These will:

1. Edit Button
2. Delete Button - Deletes Button
3. Clone Button - Makes a new copy of the current button, in the next free button slot.