Home

Welcome to the bladeRF wiki!

This wiki will serve as a place to create some community-based documentation. Please feel free to create a page and link it here!

Table of Contents Getting Started bladeRF software build/installation Expansion Boards and Accessories Help and How-to's Projects, Papers, and Blogs Tutorials and Related Reading Signal Processing and RF Amateur Radio Development Recommended Reading Project Maintenance Ongoing and future efforts

Getting Started

bladeRF software build/installation

These guides describe the process of building and installing the bladeRF software from source code. If you've just received your bladeRF, this is the place to start.

• Getting Started: Linux Live Images
• Getting Started: Linux
• Getting Started: Windows
• Getting Started: Mac OSX
• Getting Started: Verifying Basic Device Operation

Expansion Boards and Accessories

• Getting Started: XB-200 Transverter Board
• bladeRF Accessories

Help and How-to's

• Troubleshooting
  • This guide lists common problems and issues, with some advice and potential fixes.
• Upgrading the bladeRF firmware
  • This guide describes both the normal firmware and bootloader-based firmware upgrade procedures.
• bladeRF CLI Tips and Tricks
  • This pages provides information regarding the use of the bladeRF-cli
• FPGA Autoloading
  • Setting up the bladeRF to have its FPGA loaded automatically
• DC offset and IQ Imbalance Correction
  • Information about DC offset and IQ balance correction mechanisms
• Debugging dropped samples and identifying achievable sample rates

Projects, Papers, and Blogs

Feel free to share your favorite projects, papers, blogs, etc. containing bladeRF and/or SDR content! Be sure to also check out the Project Showcase on the forums.

• YateBTS
  • Yate Blog: Software Defined Mobile Network
    • OFDM - the science behind LTE
• OpenBTS
  • Minimalistic build and run test for OpenBTS 5
  • "Should you need OpenBTS on your bladeRF" on the The Sorrows of Interactive Media blog
• ATSC Transmitter
• Blog: Clayton's Domain
  • Reverse Engineering a Ceiling Fan
  • Digital amateur TV on 70cm, 33cm, and 23cm
• GitHub: argilo's sdr-examples
• GitHub: drmpeg's projects
  • Utilities for SDR digital television
  • A DVB-S transmitter for GNU Radio
  • A DVB-S2 and DVB-S2X transmitter for GNU Radio
  • Mapping block for bladeRF ATSC modulater and RRC filter FPGA image
• GitHub: GPS baseband signal generator
• GitHub: GNSS-SDRLIB: An Open Source GNSS Software Defined Radio Library
• DEF CON 23 Slides: GPS Spoofing: Low Cost GPS Simulator - Huang Lin & Yang Qing
• Jiao Xianjun (BH1RXH)'s tech blog and publications
  • Fork of an OpenCL accelerated TDD/FDD LTE Scanner, with bladeRF support added
  • A BTLE (Bluetooth Low energy)/BT4.0 radio packet transmitter
• GitHub: rtl-entropy: An entropy generator using SDR peripherals, including rtl-sdr and BladeRF
• Blog Post by Sean Cassidy: Your Own Verifiable Hardware RNG with bladeRF SDR
• An inter-balloon data relay using Software Defined Radios: Paving the way for distributed space systems
  • Congratulations to team MONSTER for winning the "Best Space Technology Demonstration" prize in the Global Space Balloon Challenge!
• Implementation of a Low-Latency Contention-Free Geographical Routing Scheme for Mobile Cyber-Physical Systems
• Microsoft Research:
  • Ziria: Wireless Programming for Hardware Dummies
  • Demo of an 802.11a/g sniffer implemented in Ziria
• Beep Networks' Spectrum Viewer
  • Blog Post: Fun with Software-Defined Radios

Tutorials and Related Reading

Find or learn something interesting? Share it here!

Signal Processing and RF

• Quadrature Signals: Complex, But Not Complicated
• I/Q Data for Dummies
• MIT OpenCourseWare: Signals and Systems (Spring 2011), Prof Alan V. Oppenheim
• Complete GPS/GLONASS Receiver Design
• Software Radio for Experimenters with GNU Radio, Octave and Python by Michel Barbeau
• Let's Assume the System Is Synchronized by Fredric J. Harris
• Presentations:
  • Multirate Digital Signal Processing by Fredric J. Harris
• Books:
  • Understanding Digital Signal Processing by Richard G. Lyons
  • Software Receiver Design: Build Your Own Digital Communication System In Five Easy Steps by C. Richard Johnson, Jr., William A. Sethares, & Andrew G. Klein
• Application Notes:
  • Atmel: Manchester Coding Basics

Amateur Radio

• American Radio Relay League
• US Amateur Radio Bands

Development

See the doc/ and doc/development directories for "official" development-related documentation.

Recommended Reading

• Using Git and GitHub
• Debugging

Project Maintenance

• Linux Distribution Status
• Static Analysis
• Proposals and Requests
• FX3 Firmware Development

Ongoing and future efforts

Working on new functionality or adding bladeRF support to a project? Create a page here to plan and document your efforts.

• Current and planned development tasks
• OpenBSC