Error compiling

[Matteo8825]

hello Sleeper85,
I need your help.
I have a problem during the compail file yaml with command line.
my error is:

WARNING GPIO2 is a strapping PIN and should only be used for I/O with care.
Attaching external pullup/down resistors to strapping pins can cause unexpected failures.
See https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
Failed config

jk_bms_ble: [source :142]

Component not found: jk_bms_ble.

• ble_client_id: client0
  protocol_version: JK02_32S
  throttle: 5s
  id: bms0
  binary_sensor.jk_bms_ble: [source :151]

Platform not found: 'binary_sensor.jk_bms_ble'.
platform: jk_bms_ble
balancing:
name: jk-ble-can BMS Balancing
charging:
name: jk-ble-can BMS Charging
discharging:
name: jk-ble-can BMS Discharging
online_status:
name: jk-ble-can Online Status
button.jk_bms_ble: [source :162]

Platform not found: 'button.jk_bms_ble'.
platform: jk_bms_ble
retrieve_settings:
name: jk-ble-can retrieve settings
retrieve_device_info:
name: jk-ble-can retrieve device info
number.jk_bms_ble: [source :169]

Platform not found: 'number.jk_bms_ble'.
platform: jk_bms_ble
jk_bms_ble_id: bms0
balance_trigger_voltage:
name: jk-ble-can balance trigger voltage
cell_count:
name: jk-ble-can cell count
total_battery_capacity:
name: jk-ble-can total battery capacity
cell_voltage_overvoltage_protection:
name: jk-ble-can cell voltage overvoltage protection
cell_voltage_overvoltage_recovery:
name: jk-ble-can cell voltage overvoltage recovery
cell_voltage_undervoltage_protection:
name: jk-ble-can cell voltage undervoltage protection
cell_voltage_undervoltage_recovery:
name: jk-ble-can cell voltage undervoltage recovery
balance_starting_voltage:
name: jk-ble-can balance starting voltage
voltage_calibration:
name: jk-ble-can voltage calibration
current_calibration:
name: jk-ble-can current calibration
power_off_voltage:
name: jk-ble-can power off voltage
max_balance_current:
name: jk-ble-can max balance current
max_charge_current:
name: jk-ble-can max charge current
max_discharge_current:
name: jk-ble-can max discharge current
sensor.jk_bms_ble: [source :270]

Platform not found: 'sensor.jk_bms_ble'.
platform: jk_bms_ble
jk_bms_ble_id: bms0
min_cell_voltage:
id: min_cell_voltage
name: jk-ble-can min cell voltage
max_cell_voltage:
id: max_cell_voltage
name: jk-ble-can max cell voltage
min_voltage_cell:
id: min_voltage_cell
name: jk-ble-can min voltage cell
max_voltage_cell:
id: max_voltage_cell
name: jk-ble-can max voltage cell
delta_cell_voltage:
name: jk-ble-can delta cell voltage
average_cell_voltage:
name: jk-ble-can average cell voltage
cell_voltage_1:
name: jk-ble-can cell voltage 1
cell_voltage_2:
name: jk-ble-can cell voltage 2
cell_voltage_3:
name: jk-ble-can cell voltage 3
cell_voltage_4:
name: jk-ble-can cell voltage 4
cell_voltage_5:
name: jk-ble-can cell voltage 5
cell_voltage_6:
name: jk-ble-can cell voltage 6
cell_voltage_7:
name: jk-ble-can cell voltage 7
cell_voltage_8:
name: jk-ble-can cell voltage 8
cell_voltage_9:
name: jk-ble-can cell voltage 9
cell_voltage_10:
name: jk-ble-can cell voltage 10
cell_voltage_11:
name: jk-ble-can cell voltage 11
cell_voltage_12:
name: jk-ble-can cell voltage 12
cell_voltage_13:
name: jk-ble-can cell voltage 13
cell_voltage_14:
name: jk-ble-can cell voltage 14
cell_voltage_15:
name: jk-ble-can cell voltage 15
cell_voltage_16:
name: jk-ble-can cell voltage 16
cell_resistance_1:
name: jk-ble-can cell resistance 1
cell_resistance_2:
name: jk-ble-can cell resistance 2
cell_resistance_3:
name: jk-ble-can cell resistance 3
cell_resistance_4:
name: jk-ble-can cell resistance 4
cell_resistance_5:
name: jk-ble-can cell resistance 5
cell_resistance_6:
name: jk-ble-can cell resistance 6
cell_resistance_7:
name: jk-ble-can cell resistance 7
cell_resistance_8:
name: jk-ble-can cell resistance 8
cell_resistance_9:
name: jk-ble-can cell resistance 9
cell_resistance_10:
name: jk-ble-can cell resistance 10
cell_resistance_11:
name: jk-ble-can cell resistance 11
cell_resistance_12:
name: jk-ble-can cell resistance 12
cell_resistance_13:
name: jk-ble-can cell resistance 13
cell_resistance_14:
name: jk-ble-can cell resistance 14
cell_resistance_15:
name: jk-ble-can cell resistance 15
cell_resistance_16:
name: jk-ble-can cell resistance 16
total_voltage:
id: total_voltage
name: jk-ble-can total voltage
current:
id: current
name: jk-ble-can current
power:
name: jk-ble-can power
charging_power:
name: jk-ble-can charging power
discharging_power:
name: jk-ble-can discharging power
temperature_sensor_1:
id: temperature_sensor_1
name: jk-ble-can temperature sensor 1
temperature_sensor_2:
id: temperature_sensor_2
name: jk-ble-can temperature sensor 2
power_tube_temperature:
id: power_tube_temperature
name: jk-ble-can power tube temperature
state_of_charge:
id: state_of_charge
name: jk-ble-can state of charge
capacity_remaining:
name: jk-ble-can capacity remaining
total_battery_capacity_setting:
id: total_battery_capacity_setting
name: jk-ble-can total battery capacity setting
charging_cycles:
id: charging_cycles
name: jk-ble-can charging cycles
total_charging_cycle_capacity:
name: jk-ble-can total charging cycle capacity
total_runtime:
name: jk-ble-can total runtime
balancing_current:
name: jk-ble-can balancing current
errors_bitmask:
id: errors_bitmask
name: jk-ble-can errors bitmask
switch.jk_bms_ble: [source :452]

Platform not found: 'switch.jk_bms_ble'.
platform: jk_bms_ble
charging:
id: charging_switch
name: jk-ble-can BMS Charge switch
discharging:
id: discharging_switch
name: jk-ble-can BMS Discharge switch
balancer:
name: jk-ble-can BMS Balance switch
text_sensor.jk_bms_ble: [source :485]

Platform not found: 'text_sensor.jk_bms_ble'.
platform: jk_bms_ble
errors:
name: jk-ble-can errors
total_runtime_formatted:
name: jk-ble-can total runtime formatted

[Sleeper85]

Hi,

jk_bms_ble is an external component. Does the PC from which you compiled the YAML have access to the Internet?

[Matteo8825]

yes, I had deleted the part of the external components code, now I have reinserted it, but it gives me the following error:

INFO ESPHome 2023.12.7
INFO Reading configuration jk_ble_can.yaml...
INFO Cloning https://github.com/syssi/esphome-jk-bms.git@main
Failed config

external_components: [source :55]

git is not installed but required for external_components.
Please see https://git-scm.com/book/en/v2/Getting-Started-Installing-Git for installing git.
source: github://syssi/esphome-jk-bms@main
refresh: 0s

jk-ble-can.txt

[Sleeper85]

You need 'git' to clone the repository but it is not installed.

I can already tell you that the BLE version is not stable with Atom Lite.

The BLE version is stable with Atom S3. I need to update the readme.

[Matteo8825]

Since I'm a beginner, can you tell me how to install "git"?
since I use atom lite then I will try with the wire version

[Matteo8825]

I did it, thank you very much for the support