site.mk

##      gluon site.mk makefile example
##      GLUON_SITE_PACKAGES
#               specify gluon/openwrt packages to include here
#               The gluon-mesh-batman-adv-* package must come first because of the dependency resolution

GLUON_FEATURES := \
        autoupdater \
        authorized-keys \
        config-mode-geo-location \
        ebtables-filter-multicast \
        ebtables-filter-ra-dhcp \
        ebtables-limit-arp \
        mesh-batman-adv-15 \
        mesh-vpn-tunneldigger \
        radv-filterd \
        radvd \
        respondd \
        setup-mode \
        status-page \
        web-advanced \
        web-private-wifi \
        weeklyreboot \
        web-wizard
#alte packete
#GLUON_SITE_PACKAGES := \#
#       respondd-module-airtime \
#       gluon-alfred \
#       iwinfo \
#       iptables \
#       gluon-rsk-config \
#       gluon-rsk-block-mesh

GLUON_SITE_PACKAGES := \
        gluon-web-autoupdater \
        ffho-autoupdater-wifi-fallback \
        haveged \
        iwinfo \
        ecdsautils \
        gluon-ssid-changer \
        respondd-module-airtime \
        gluon-rsk-config \
        gluon-rsk-block-mesh

# support the USB stack
USB_PACKAGES_BASIC := \
        kmod-usb-core \
        kmod-usb2 \
        kmod-usb-hid

# FAT32 Support for USB
USB_PACKAGES_STORAGE := \
        block-mount \
        kmod-fs-ext4 \
        kmod-fs-vfat \
        kmod-usb-storage  \
        kmod-usb-storage-extras  \
        blkid  \
        swap-utils  \
        kmod-nls-cp1250  \
        kmod-nls-cp1251  \
        kmod-nls-cp437  \
        kmod-nls-cp775  \
        kmod-nls-cp850  \
        kmod-nls-cp852  \
        kmod-nls-cp866  \
        kmod-nls-iso8859-1  \
        kmod-nls-iso8859-13  \
        kmod-nls-iso8859-15  \
        kmod-nls-iso8859-2  \
        kmod-nls-koi8r  \
        kmod-nls-utf8

USB_PACKAGES_NET := \
        kmod-usb-net \
        kmod-usb-net-asix \
        kmod-usb-net-asix-ax88179 \
        kmod-usb-net-cdc-eem \
        kmod-usb-net-cdc-ether \
        kmod-usb-net-cdc-mbim \
        kmod-usb-net-cdc-ncm \
        kmod-usb-net-cdc-subset \
        kmod-usb-net-dm9601-ether \
        kmod-usb-net-hso \
        kmod-usb-net-huawei-cdc-ncm \
        kmod-usb-net-ipheth \
        kmod-usb-net-kalmia \
        kmod-usb-net-kaweth \
        kmod-usb-net-mcs7830 \
        kmod-usb-net-pegasus \
        kmod-usb-net-qmi-wwan \
        kmod-usb-net-rndis \
        kmod-usb-net-rtl8150 \
        kmod-usb-net-rtl8152 \
        kmod-usb-net-sierrawireless \
        kmod-usb-net-smsc95xx \
        kmod-mii \
        kmod-nls-base

NIC_PACKAGES_NET := \
        kmod-sky2 \
        kmod-r8169 \
        kmod-forcedeth \
        kmod-8139too

TOOLS_PACKAGES := \
        bash \
        tcpdump \
        vnstat \
        iperf \
        iperf3 \
        socat \
        usbutils


ifeq ($(GLUON_TARGET),x86-generic)
GLUON_SITE_PACKAGES += \
        kmod-usb-hid \
        ip-full \
        $(NIC_PACKAGES_NET) \
        $(USB_PACKAGES_BASIC) \
        $(USB_PACKAGES_STORAGE) \
        $(USB_PACKAGES_NET) \
        $(TOOLS_PACKAGES)
endif

ifeq ($(GLUON_TARGET),x86-64)
GLUON_SITE_PACKAGES += \
        kmod-usb-hid \
        ip-full \
        $(NIC_PACKAGES_NET) \
        $(USB_PACKAGES_BASIC) \
        $(USB_PACKAGES_STORAGE) \
        $(USB_PACKAGES_NET) \
        $(TOOLS_PACKAGES)
endif

##      DEFAULT_GLUON_RELEASE
#               version string to use for images
#               gluon relies on
#                       opkg compare-versions "$1" '>>' "$2"
#               to decide if a version is newer or not.

DEFAULT_GLUON_RELEASE := 2023.0.1

DEFAULT_GLUON_CHECKOUT := v2023.1

##      GLUON_RELEASE
#               call make with custom GLUON_RELEASE flag, to use your own release version scheme.
#               e.g.:
#                       $ make images GLUON_RELEASE=23.42+5
#               would generate images named like this:
#                       gluon-ff%site_code%-23.42+5-%router_model%.bin

# Allow overriding the release number from the command line
GLUON_RELEASE ?= $(DEFAULT_GLUON_RELEASE)

# Default priority for updates.
GLUON_PRIORITY ?= 0

# Region code required for some images; supported values: us eu
GLUON_REGION ?= eu

# Languages to include
GLUON_LANGS ?= en de

# Select ath10k Firmware for adhoc
GLUON_ATH10K_MESH ?= 11s

GLUON_DEPRECATED ?= upgrade

# Set default branch for building custom images
GLUON_AUTOUPDATER_BRANCH ?= experimental
GLUON_AUTOUPDATER_ENABLED ?= 1