From 6f778b84d60416bce5b5bc6dac119b968c6ad505 Mon Sep 17 00:00:00 2001
From: adameat <34044711+adameat@users.noreply.github.com>
Date: Sat, 16 May 2020 01:25:20 +0300
Subject: [PATCH 1/3] Update README.md

---
 README.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/README.md b/README.md
index 7045c08..6110567 100644
--- a/README.md
+++ b/README.md
@@ -6,7 +6,7 @@ This is very simple library to connect DS18B20 temperature sensor devices from A
 Getting started
 ---------------
 
-By default, if you using only one DS18B20 device, you don't need any external pull-up resisters.
+By default, if you using only one DS18B20 device, you don't need any external pull-up resistors.
 Just connect directly:
 
 +3.3V -> RED

From ff675a1f7759f123ec907af1e4b13947ffcb7a9b Mon Sep 17 00:00:00 2001
From: adameat <34044711+adameat@users.noreply.github.com>
Date: Sat, 16 May 2020 01:25:52 +0300
Subject: [PATCH 2/3] Update README.md

---
 README.md | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/README.md b/README.md
index 6110567..d88333b 100644
--- a/README.md
+++ b/README.md
@@ -9,9 +9,9 @@ Getting started
 By default, if you using only one DS18B20 device, you don't need any external pull-up resistors.
 Just connect directly:
 
-+3.3V -> RED
-BUS   -> YELLOW
-GND   -> BLACK
+* +3.3V -> RED
+* BUS   -> YELLOW
+* GND   -> BLACK
 
 Where BUS is any digital ping (like 9, for example).
 And use example from examples/AnyDevice.
@@ -21,9 +21,9 @@ Multiple devices
 
 When you need to work with multiple devices on the same bus, you need external pull-up resistor of 1.7~2.2kOm.
 
-+3.3V -> RED1 + RED2 + ...
-BUS   -> YELLOW1 + YELLOW2 + ... 
-GND   -> BLACK1 + BLACK2 + ...
+* +3.3V -> RED1 + RED2 + ...
+* BUS   -> YELLOW1 + YELLOW2 + ... 
+* GND   -> BLACK1 + BLACK2 + ...
 
 And connect BUS and +3.3V lines with pull-up resistor.
 
@@ -32,8 +32,8 @@ Parasite power
 
 DS18B20 are able to share bus wire for powering itself, so only two wires required. And you will need external pullup resistor too.
 
-BUS -> YELLOW
-GND -> RED + BLACK
+* BUS -> YELLOW
+* GND -> RED + BLACK
 
 And connect BUS and +3.3V lines with pull-up resistor.
 

From bbad724053237d5c2f5ebcc54bda0ccddd7616e4 Mon Sep 17 00:00:00 2001
From: adameat <34044711+adameat@users.noreply.github.com>
Date: Sat, 16 May 2020 01:27:53 +0300
Subject: [PATCH 3/3] Update README.md

---
 README.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/README.md b/README.md
index d88333b..ff34988 100644
--- a/README.md
+++ b/README.md
@@ -6,7 +6,7 @@ This is very simple library to connect DS18B20 temperature sensor devices from A
 Getting started
 ---------------
 
-By default, if you using only one DS18B20 device, you don't need any external pull-up resistors.
+By default, if you use only one DS18B20 device, you don't need external pull-up resistor.
 Just connect directly:
 
 * +3.3V -> RED