diff --git a/examples/test/test.ino b/examples/test/test.ino
index 6bfc4b8..d7e50c8 100644
--- a/examples/test/test.ino
+++ b/examples/test/test.ino
@@ -2,20 +2,30 @@
 
 void setup() {
 
-  // Start Terminal
 	Serial.begin(115200);
-
-  // Start Analayser
 	Energy_Analayser.Begin();
 
 }
 
 void loop() {
 
-  Energy_Analayser.Control_Limits();
+Serial.print("RMS Voltage    : "); Serial.print(Energy_Analayser.Voltage_RMS('R')); Serial.println(" V");
+Serial.print("RMS Current    : "); Serial.print(Energy_Analayser.Current_RMS('R'), 3); Serial.println(" A");
+Serial.print("Energy         : "); Serial.print(Energy_Analayser.Active_Energy_Recieved('R'), 0); Serial.println(" Wh");
+Serial.print("Reactive Energy: "); Serial.print(Energy_Analayser.ReActive_Energy_Recieved('R'), 0); Serial.println(" VARh");
+
+
+
+Serial.print("Active Power   : "); Serial.print(Energy_Analayser.Active_Power('R')); Serial.println(" W");
+Serial.print("ReActive Power : "); Serial.print(Energy_Analayser.ReActive_Power('R')); Serial.println(" VAR");
+Serial.print("Apparent Power : "); Serial.print(Energy_Analayser.Apparent_Power('R')); Serial.println(" VA");
+
+Serial.print("Power Factor   : "); Serial.print(Energy_Analayser.Power_Factor('R')); Serial.println(" ");
+
+Serial.print("Frequency      : "); Serial.print(Energy_Analayser.Frequency()); Serial.println(" Hz");
 
-  Serial.print(Energy_Analayser.Voltage_RMS('R'), 3);
-  
-  delay(1000);
+Serial.print("IC Temperature : "); Serial.print(Energy_Analayser.IC_Temperature()); Serial.println(" C");
+Serial.println("------------------------------------------");
 
+delay(60000);
 }
diff --git a/src/MAX78630.cpp b/src/MAX78630.cpp
index 1ce0886..fa8c174 100644
--- a/src/MAX78630.cpp
+++ b/src/MAX78630.cpp
@@ -79,8 +79,8 @@ bool MAX78630::Begin(void) {
 	bool _Config_Reg_Bits[8] = {false, false, false, false, false, false, false, false};
 
 	// Set Configuration
-	_Config_Reg_Bits[7] = false;	// 1= reset all energy accumulators. This bit automatically clears to zero when the reset completes. 
-	_Config_Reg_Bits[6] = false;	// 1= reset the minima and maxima registers for all monitored variables. This bit automatically clears to zero when the reset completes.
+	_Config_Reg_Bits[7] = true;	// 1= reset all energy accumulators. This bit automatically clears to zero when the reset completes. 
+	_Config_Reg_Bits[6] = true;	// 1= reset the minima and maxima registers for all monitored variables. This bit automatically clears to zero when the reset completes.
 	_Config_Reg_Bits[5] = true;		// Line Lock 1= lock to line cycle; 0= independent
 	_Config_Reg_Bits[4] = true;		// Temperature Compensation. Should be set to “1” for proper operation.
 
@@ -123,8 +123,8 @@ bool MAX78630::Begin(void) {
 	Set_Limit(2, _Temp_Min);
 	Set_Limit(3, _Fq_Max);
 	Set_Limit(4, _Fq_Min);
-	Set_Limit(5, (_V_RMS_Max));
-	Set_Limit(6, (_V_RMS_Min));
+	Set_Limit(5, _V_RMS_Max);
+	Set_Limit(6, _V_RMS_Min);
 	Set_Limit(7, _C_Max);
 	Set_Limit(8, _PF_Min);
 	Set_Limit(9, _V_Max_Imb);
@@ -807,8 +807,8 @@ float MAX78630::Current_RMS(char Phase) {
 	float _Result = 0;
 
 	if (Phase == 'R') _Result = _Register_Pointer_Read(IA_RMS); // Measure Phase R
-	if (Phase == 'S') _Result = _Register_Pointer_Read(IA_RMS); // Measure Phase S
-	if (Phase == 'T') _Result = _Register_Pointer_Read(IA_RMS); // Measure Phase T
+	if (Phase == 'S') _Result = _Register_Pointer_Read(IB_RMS); // Measure Phase S
+	if (Phase == 'T') _Result = _Register_Pointer_Read(IC_RMS); // Measure Phase T
 	if (Phase == 'A') _Result = _Register_Pointer_Read(IT_RMS); // Measure Phase Average
 	
 	// End Function
@@ -1434,6 +1434,9 @@ double MAX78630::_Register_Pointer_Read(Register _Command) {
 	// Clear Serial Buffer
 	_Clear_Buffer();
 
+	// Command Send Delay
+	delay(5);
+
 	// Calculate CheckSum
 	uint8_t _Request_CheckSum = 0x100 - ((0xAA + 0x07 + 0xA3 + _Command.Low_Address + _Command.High_Address + 0xE3) % 256);
 
@@ -1483,18 +1486,15 @@ double MAX78630::_Register_Pointer_Read(Register _Command) {
 
 		// Calculate Response
 		if (_Command.Data_Type == 0) {
-			
+
+			// Handle Response (int)	
 			_Data_SUM = _Data_RAW;
 			
 		} else {
 
 			// Handle Bits
-			for (uint8_t i = 0; i < 23; i++) {
-
-				if (bitRead(_Data_RAW, i) == true) _Data_SUM += pow(2, (i - _Command.Data_Type));
-
-			}
-			if (bitRead(_Data_RAW, 23) == true) _Data_SUM += -1 * pow(2, (23 - _Command.Data_Type));
+			for (uint8_t i = 0; i < 23; i++) if (bitRead(_Data_RAW, i) == true) _Data_SUM += pow(2, (i - _Command.Data_Type));
+			if (bitRead(_Data_RAW, 23) == true) _Data_SUM += (-1 * pow(2, (23 - _Command.Data_Type)));
 
 		}
 
diff --git a/src/MAX78630_Config.h b/src/MAX78630_Config.h
index 14fe35a..70fd5c7 100644
--- a/src/MAX78630_Config.h
+++ b/src/MAX78630_Config.h
@@ -6,7 +6,7 @@
 #define Energy_Serial_Baud          38400
 
 // Define Version
-#define Version				        "04.00.11"
+#define MAX78630_Version	        "04.00.11"
 
 // Define Default Read Count
 #define Read_Count                  3