Anyka-Camera---AK3918EN080-V200

Platform

Source - Anyka's website

The model I have uses the YI IoT app

Camera in question -

Specs

CPU

• ARM926EJ-S

Image Signal Processor (ISP)

• 3A (AE, AWB, AF)
• Gamma Correction
• Defect Pixel Correction
• Green Balance
• 3DNR,2DNR
• Sharp

Video Pre-processor

• Supports image scaling
• Supports On-screen Display (OSD) and timestamp
• Supports Privacy Mask

Video Encoder

• H.264 encoder
• JPEG encoder
• Supports multi-stream, Video3 + JPEG1

Audio Codec

• Single DAC and single ADC
• Supports 8KHz/9.6KHz/11.025KHz/12KHz/16KHz/22.05KHz/24KHz/32KHz/44.1KHz/48KHz Sampling Rate
• Supports multiple audio coding/decoding formats
• Audio 3A function (AEC, AGC and ANR)

Memory

• Embedded 512Mbit DDR2

Hardware Encryption

• AES, DES and 3DES engine

Ethernet MAC

• MII/RMII Interface
• 10/100Mbps, full-duplex mode

Peripheral Interfaces

• USB2.0
• Ethernet MAC
• MMC/SD/SDIO
• SPI
• TWI
• I2S
• UART
• GPIO
• PWM

Package

• QFNL80, ELQFP128

AK39 clocks: CPU 400MHz, MEM 200MHz, ASIC 100MHz

Processor	: ARM926EJ-S rev 5 (v5l)
BogoMIPS	: 199.06
Features	: swp half fastmult edsp java 
CPU implementer	: 0x41
CPU architecture: 5TEJ
CPU variant	: 0x0
CPU part	: 0x926
CPU revision	: 5

Hardware	: Cloud39EV2_AK3918E80PIN_MNBD
Revision	: 0000
Serial		: 0000000000000000

Linux version 3.4.35  (gcc version 4.8.5 (anyka (gcc-4.8.5 + binutils-2.24 + ulcibc-0.9.33.2)(20170223)) ) #2 Mon Jun 5 14:24:08 CST 2023
-AKV_2.5.04

MemTotal:          36540 kB
MemFree:            8148 kB

Both Telnet and FTP are accessible

username: root - password: (leave empty)