Which is the primary .ino to compile?

[sandman507th]

Hello,
Thank you for creating this project.
I am trying to get it compiled and installed on the specified hardware.
Which is the primary .ino to compile?
Using Arduino IDE, I tried to verify "bbn-nmea2000-usb-gw-m5atom.ino" but it fails with:

Compilation error: ActisenseReader.h: No such file or directory

Is there something else I need to download and compile first?
Also, I am not sure how to compile and upload sketches for the daughter devices (The sensor and the CAN bus device).
Just plug them all in and compile/upload one at a time?
Any help would be appreciated.

[mgrouch]

Thanks. I forgot to commit GitHub workflow for this project. There are couple other project next to it which have workflows. You could see dependencies from there

[mgrouch]

Actually no. I didn’t forget it.

It’s there

https://github.com/bareboat-necessities/bbn-nmea200-m5atom/blob/main/.github/workflows/build.yaml

[mgrouch]

Here you can read more about how to use Arduino

https://github.com/bareboat-necessities/bbn-m5stack-tough

you can skip LVGL related steps

[sandman507th]

OK that is helpful, thanks. I got the stuff under the "Required Libraries" section installed (minus LVGL).
The .yaml indicates I need this too:
https://github.com/ttlappalainen/NMEA2000
(and this is apparently where the missing "ActisenseReader.h" comes from.
So, in Arduino IDE, I used Sketch -> Include Library -> "Add .ZIP library"
Now the Verify of "bbn-nmea2000-usb-gw-m5atom.ino" seems to complete without error (But for a previous LED test sketch, according to the output?!?) .

The "tough" instructions state to compile/upload "bbn-m5stack-tough.ino". But that is not what I want for the "bbn-nmea200-m5atom" project, right?

Will uploading "bbn-nmea2000-usb-gw-m5atom.ino" pull in the other two sketches for the attached sensor and CAN bus?
Sorry, I know a little about computers but am pretty green with Arduino.