All parts printed with PETG, 0.24mm layer height, and 10-15% infill on Ender 3 Pro.
| Name |
Quantity |
Print Time |
archimedes-screw |
1 |
11h6m |
axle-bevel-gear |
1 |
25m |
bearing-adapter |
2 |
23m (46m) |
enclosure-archimedes-back-left |
1 |
14h19m |
enclosure-archimedes-back-right |
1 |
15h10m |
enclosure-archimedes-bottom-lid |
1 |
3h24m |
enclosure-archimedes-front-left |
1 |
12h38m |
enclosure-archimedes-front-right |
1 |
14h10m |
enclosure-chute-bottom |
1 |
13h50m |
enclosure-chute-top |
1 |
7h27m |
enclosure-motor-foot |
1 |
2h9m |
enclosure-motor-lid |
1 |
2h16m |
enclosure-motor |
1 |
13h46m |
hopper-adapter |
1 |
8h2m |
hopper |
1 |
13h47m |
leg |
4 |
3h26m (13h44m) |
motor-bevel-gear |
1 |
25m |
motor-mount |
1 |
1h50m |
servo-arm |
1 |
41m |
servo-cover |
1 |
33m |
|
|
|
| Total Print Time |
|
TODO: |
- 300x6mm stainless steel rod
- 8x22x7mm 608rs bearing
- x1 -
enclosure-archimedes feed through to motor
- x1 -
enclosure-chute holds axle
- M4x12mm screw
- M4x20mm screw
- x8 - Connecting
enclosure-archimedes parts top/bottom
- M4x8mm screw
- x1 -
motor-bevel-gear to motor
- x1 -
axle-bevel-gear to axle
- M4x12mm screw
- x2 -
archimedes-screw to axle
- M4x20mm hex socket head cap screws
- x4 - Connecting legs to
enclosure-archimedes
- M4 hex nut
- x8 - Connecting
enclosure-archimedes parts top/bottom
- x4 - Connecting legs to
enclosure-archimedes
- M4 square nut
- x2 -
motor-mount
- x2 -
axle-bevel-gear and motor-bevel-gear
- x2 -
enclosure-motor to enclosure-archimedes
- x2 -
archimedes-screw
- x4 -
enclosure-motor-lid
- M2.5x15+6mm brass standoff
- x4 - LM298N motor driver mount
- x2 - Main board mount
- M2.5x6+6mm brass standoff
- M2.5x6mm screw
- x4 - LM298N motor driver mount
- x4 - Main board mount
- M3x8mm hex socket button head cap screw
- M4x45mm hex socket button head cap screw
- x4 -
hopper to enclosure-archimedes