Sensor config Frsky

Lua script to change Frsky sensor config from the radio (ported from erskyTx. Thanks to MikeB)

This is a one-time script. Copy the file chgId.lua to SCRIPTS folder in the sdcard and execute as one-time script from SD-CARD screen (long press and Execute). Since opentx 2.3 copy to SCRIPTS/TOOLS for easier access. It can be executed also as telemetry script (only Taranis) if copied to TELEMETRY folder and assigned to a model's telemetry screen

Connect the sensors to receiver smartport (does not work with the smartport on the radio)
Multiple sensors can be connected. Do not connect more than one sensor per type (e.g. two FLVSS) or both will change to the same sensor id
Once selected the sensor type, the sensor id is read
Then change the sensor id and long press Menu or Enter to update
It may be needed to repeat the process if the sensor id is not updated
If telemetry is lost after change id, restart Rx and Tx
For X7, X9, X-lite and Horus radios with opentx 2.2 or higher