We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? # for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “#”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? # to your account
Hello: I not sure I do this correctly. I have MoonGen with 2 intel X710 bind to DPDK, Port 1(SRC_IP_BASE=10.0.0.10) connect to my router port 0 (10.0.0.100) and port 1 (DST_IP = "10.1.0.10") connect to my route port1 (10.1.0.100) and change LUA content(local GW_IP = "10.0.0.100") RUN like this ./build/MoonGen examples/l3-load-latency.lua 0 1 I get nothing on Moongen Port 1 [Device: id=0] TX: 5.51 Mpps, 2823 Mbit/s (3706 Mbit/s with framing) [Device: id=1] RX: 0.00 Mpps, 0 Mbit/s (0 Mbit/s with framing) [Device: id=0] TX: 5.78 Mpps, 2958 Mbit/s (3882 Mbit/s with framing) [Device: id=1] RX: 0.00 Mpps, 0 Mbit/s (0 Mbit/s with framing) [Device: id=0] TX: 5.65 Mpps, 2893 Mbit/s (3798 Mbit/s with framing) [Device: id=1] RX: 0.00 Mpps, 0 Mbit/s (0 Mbit/s with framing) [Device: id=0] TX: 5.57 Mpps, 2850 Mbit/s (3740 Mbit/s with framing) [Device: id=1] RX: 0.00 Mpps, 0 Mbit/s (0 Mbit/s with framing) [Device: id=0] TX: 5.57 Mpps, 2854 Mbit/s (3746 Mbit/s with framing) [Device: id=1] RX: 0.00 Mpps, 0 Mbit/s (0 Mbit/s with framing) ^C[Device: id=0] TX: 5.46 (StdDev 0.23) Mpps, 2793 (StdDev 119) Mbit/s (3666 Mbit/s with framing), total 68907795 packets with 4410114744 bytes (incl. CRC) [Device: id=1] RX: 0.00 (StdDev 0.00) Mpps, 0 (StdDev 0) Mbit/s (0 Mbit/s with framing), total 1 packets with 64 bytes (incl. CRC) Samples: 43, Average: 1428321.0 ns, StdDev: 3643238.3 ns, Quartiles: 67256.0/70896.0/223781.0 ns
./build/MoonGen examples/l3-load-latency.lua 0 1
But my route can see packet already send to Moongen Port 1: And packet DST MACADDRESS is good. Some thing wrong???
The text was updated successfully, but these errors were encountered:
No branches or pull requests
Hello:
I not sure I do this correctly.
I have MoonGen with 2 intel X710 bind to DPDK, Port 1(SRC_IP_BASE=10.0.0.10) connect to my router port 0 (10.0.0.100)
and port 1 (DST_IP = "10.1.0.10") connect to my route port1 (10.1.0.100) and change LUA content(local GW_IP = "10.0.0.100")
RUN like this
./build/MoonGen examples/l3-load-latency.lua 0 1
I get nothing on Moongen Port 1
[Device: id=0] TX: 5.51 Mpps, 2823 Mbit/s (3706 Mbit/s with framing)
[Device: id=1] RX: 0.00 Mpps, 0 Mbit/s (0 Mbit/s with framing)
[Device: id=0] TX: 5.78 Mpps, 2958 Mbit/s (3882 Mbit/s with framing)
[Device: id=1] RX: 0.00 Mpps, 0 Mbit/s (0 Mbit/s with framing)
[Device: id=0] TX: 5.65 Mpps, 2893 Mbit/s (3798 Mbit/s with framing)
[Device: id=1] RX: 0.00 Mpps, 0 Mbit/s (0 Mbit/s with framing)
[Device: id=0] TX: 5.57 Mpps, 2850 Mbit/s (3740 Mbit/s with framing)
[Device: id=1] RX: 0.00 Mpps, 0 Mbit/s (0 Mbit/s with framing)
[Device: id=0] TX: 5.57 Mpps, 2854 Mbit/s (3746 Mbit/s with framing)
[Device: id=1] RX: 0.00 Mpps, 0 Mbit/s (0 Mbit/s with framing)
^C[Device: id=0] TX: 5.46 (StdDev 0.23) Mpps, 2793 (StdDev 119) Mbit/s (3666 Mbit/s with framing), total 68907795 packets with 4410114744 bytes (incl. CRC)
[Device: id=1] RX: 0.00 (StdDev 0.00) Mpps, 0 (StdDev 0) Mbit/s (0 Mbit/s with framing), total 1 packets with 64 bytes (incl. CRC)
Samples: 43, Average: 1428321.0 ns, StdDev: 3643238.3 ns, Quartiles: 67256.0/70896.0/223781.0 ns
But my route can see packet already send to Moongen Port 1:
![图片](https://user-images.githubusercontent.com/19371588/234893492-3e19c899-d025-4e80-9c4c-90b023a59bc3.png)
And packet DST MACADDRESS is good. Some thing wrong???
The text was updated successfully, but these errors were encountered: