Manual.md

HOW TO USE!!!

If you read nothing else at least read this!

1. Navigate to the "browse" bar at the bottom and select "yes"

2. Select your .op1 firmware file

3. Unpack firmware file using "Unpack" button

4. Once again, navigate to the "browse" bar at the bottom but this time select "no"

5. Select your unpacked op1 firware directory. folder name example: "op1_246"

6. Select the mods you want to apply. Be careful not to apply multiple mods of corsponding type. For example, If choosing an "iter" replacement graphic select only one.

7. Select the "repack" option to rebuild your firimware file with the mods applied.

8. On your OP-1: hold COM while turning on the power and hit the "1" key under the display.

9. Connect a USB cable to your computer and drag the repacked firmware directory to the OP-1. Eject when transfer is complete.

X. Your OP-1 should verify the firmeware update. Wait for your device to prompt you for a reboot. Restart your device.

Enjoy your newly moddifed OP-1!!!

SVG's

1. Navigate to the "browse" bar at the bottom and select "yes"

2. Select the SVG you want to analyze or modify

3. Choose ethier option "Normalize SVG" or "Analyze SVG"

4. Place modified SVG in the unpacked op-1 fimrware. Path: "Content/Display/SVG you want to replace. Ensure the name matches the SVG you want to replace.

5. Repack the firmware after coping over your normilized SVG

Follow the how to use guide above this one for the remaining steps starting at step 7.

SEE "Custom GFX Tips" in the tool for more on SVG errors and how to make your own.