ESP32 BLE Mesh only connected node can receive on/off commands

[bhcuong2008]

Hi,

I have faced the same issue in this post.

https://stackoverflow.com/questions/74984508/esp32-ble-mesh-only-connected-node-can-receive-on-off-commands

I setup a mesh network using nRF Mesh android app with 3 nodes: 1 node with onoff client model (named cli1), 2 nodes with onoff server models (named srv1, srv2 correspondingly).

1. To control led on node srv1, I must press Connect button in the app and select node srv1. If connecting successfully, then I can control leds on/off (already binding app key) on node srv1. At this time, if I choose node srv2, then I can't control leds on srv2.

2. To control led on node srv2, I must press Connect button in the app and select node srv2. If connecting successfully, then I can control leds on/off (already binding app key) on node srv2. At this time, if I choose node srv1, then I can't control leds on srv1.

3. If I press Connect button in the app, and select node cli1. If successfully, but I can't control leds on nodes srv1, srv2.

In my understanding of BLE mesh, if the app connects successfully to one of 3 nodes within a mesh network, then I can control leds on all server nodes in that mesh network from the app, or any nodes.

I use 3 boards with ESP32-C6 chip, esp-idf 5.4.1, in Arduino environment using NimBLE host stack. I follow 2 tutorials:

1. https://github.com/espressif/esp-idf/tree/v5.4.1/examples/bluetooth/esp_ble_mesh/onoff_models/onoff_server
2. https://github.com/espressif/esp-idf/tree/v5.4.1/examples/bluetooth/esp_ble_mesh/onoff_models/onoff_client

Here are my 3 boards: 1 board with blue led is OnOff Client node, the other 2 boards are OnOff Server nodes.

Thanks.

[bhcuong2008]

I've just solved it with option CONFIG_BT_LE_SCAN_DUPL_TYPE_DATA_DEVICE=y in my sdkconfig!