-
Notifications
You must be signed in to change notification settings - Fork 34
New issue
Have a question about this project? # for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “#”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? # to your account
[RFE] Enable CONFIG_PPS_CLIENT_GPIO in kernel #1430
Comments
The file to enable this would be |
Hello, on my Orange PI, this is the size of the module - should be fine size-wise, but we need to cross check:
|
Thanks, if it's just a module it won't be in the initrd and things are good. |
Current situation
Currently,
CONFIG_PPS_CLIENT_GPIO
is not set, which causes PPS services to be unavailable.Impact
I am in progress with trying to make a GPS-disciplined network clock on a Raspberry Pi, using chronyd and gpsd. This requires a PPS device to be created in
/dev
, which gpsd can then use to synchronize with a serial device. I am unable to load the modulepps-gpio
which exists on Raspbian.Ideal future situation
Ideally, I would be able to create a
/dev/pps0
device that can be used by gpsd to control chrony & set the RTC accurately.Implementation options
The primary method I can think of is to change the kernel build config setting to set
CONFIG_PPS_CLIENT_GPIO=y
Additional information
System info:
If there are any questions, or anything I can do/test, please let me know!
The text was updated successfully, but these errors were encountered: