Multitenant Setup

Assuming that you've already got your first site running and you've performed the production deployment steps, this section explains how to host your second site (and more). Your first site is automatically set as default site. You can change it with the command,

bench use sitename

Port based multitenancy

You can create a new site and make run it on a different port (while the first one runs on port 80).

• Create a new site

  bench new-site site2name

• Set port

  bench set-nginx-port site2name 82

• Re generate nginx config

  bench setup nginx

• Reload nginx

  sudo service nginx reload

DNS based multitenancy

You can name your sites as the hostnames that would resolve to it. Thus, all the sites you add to the bench would run on the same port and will be automatically selected based on the hostname.

DNS based multitenancy mode is disabled by default, you can switch it on / off using the command,

bench config dns_multitenant on

To make a new site under DNS based multitenancy, perform the following steps.

• Create a new site

  bench new-site site2name

• Re generate nginx config

  bench setup nginx

• Reload nginx

  sudo service nginx reload

Note : For "DNS based multitenancy", currentsite.txt(/frappe-bench/sites/) should empty.