Skip to content

AddressSanitizer

Jump to bottom
Alexander Potapenko edited this page Aug 31, 2015 · 29 revisions

New: AddressSanitizer is released as part of LLVM 3.1. New: Watch the presentation from the LLVM Developer's meeting (Nov 18, 2011): Video, slides. New: Read the USENIX ATC '2012 paper.

Introduction

AddressSanitizer (aka ASan) is a memory error detector for C/C++. It finds:

This tool is very fast. The average slowdown of the instrumented program is ~2x (see AddressSanitizerPerformanceNumbers).

The tool consists of a compiler instrumentation module (currently, an LLVM pass) and a run-time library which replaces the malloc function.

The tool works on x86 Linux and Mac, and ARM Android.

See also:

Getting AddressSanitizer

AddressSanitizer is a part of LLVM starting with version 3.1 and a part of GCC starting with version 4.8 If you prefer to build from source, see AddressSanitizerHowToBuild.

So far, AddressSanitizer has been tested only on Linux Ubuntu 12.04, 64-bit (it can run both 64- and 32-bit programs), Mac 10.6, 10.7 and 10.8, and AddressSanitizerOnAndroid 4.2+.

Using AddressSanitizer

In order to use AddressSanitizer you will need to compile and link your program using clang with the -fsanitize=address switch. To get a reasonable performance add -O1 or higher. To get nicer stack traces in error messages add -fno-omit-frame-pointer. Note: Clang 3.1 release uses another flag syntax.

% cat tests/use-after-free.c
#include <stdlib.h>
int main() {
  char *x = (char*)malloc(10 * sizeof(char*));
  free(x);
  return x[5];
}
% ../clang_build_Linux/Release+Asserts/bin/clang -fsanitize=address -O1 -fno-omit-frame-pointer -g   tests/use-after-free.c

Now, run the executable. AddressSanitizerCallStack page describes how to obtain symbolized stack traces.

% ./a.out
==9901==ERROR: AddressSanitizer: heap-use-after-free on address 0x60700000dfb5 at pc 0x45917b bp 0x7fff4490c700 sp 0x7fff4490c6f8
READ of size 1 at 0x60700000dfb5 thread T0
    #0 0x45917a in main use-after-free.c:5
    #1 0x7fce9f25e76c in __libc_start_main /build/buildd/eglibc-2.15/csu/libc-start.c:226
    #2 0x459074 in _start (a.out+0x459074)
0x60700000dfb5 is located 5 bytes inside of 80-byte region [0x60700000dfb0,0x60700000e000)
freed by thread T0 here:
    #0 0x4441ee in __interceptor_free projects/compiler-rt/lib/asan/asan_malloc_linux.cc:64
    #1 0x45914a in main use-after-free.c:4
    #2 0x7fce9f25e76c in __libc_start_main /build/buildd/eglibc-2.15/csu/libc-start.c:226
previously allocated by thread T0 here:
    #0 0x44436e in __interceptor_malloc projects/compiler-rt/lib/asan/asan_malloc_linux.cc:74
    #1 0x45913f in main use-after-free.c:3
    #2 0x7fce9f25e76c in __libc_start_main /build/buildd/eglibc-2.15/csu/libc-start.c:226
SUMMARY: AddressSanitizer: heap-use-after-free use-after-free.c:5 main

Interaction with other tools

gdb

See AddressSanitizerAndDebugger

ulimit -v

The ulimit -v command makes little sense with ASan-ified binaries because ASan consumes 20 terabytes of virtual memory (plus a bit).

You may try more sophisticated tools to limit your memory consumption, e.g. http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/cgroups/memory.txt

Flags

See the separate AddressSanitizerFlags page.

Call stack

See the separate AddressSanitizerCallStack page.

Incompatibility

Sometimes an AddressSanitizer build may behave differently than the regular one. See AddressSanitizerIncompatiblity for details.

Turning off instrumentation

In some cases a particular function should be ignored (not instrumented) by AddressSanitizer:

  • Ignore a very hot function known to be correct to speedup the app.
  • Ignore a function that does some low-level magic (e.g. walking through the thread's stack bypassing the frame boundaries).
  • Don't report a known problem. In either case, be very careful.

To ignore certain functions, one can use the no_sanitize_address attribute supported by Clang (3.3+) and GCC (4.8+). You can define the following macro:

#if defined(__clang__) || defined (__GNUC__)
# define ATTRIBUTE_NO_SANITIZE_ADDRESS __attribute__((no_sanitize_address))
#else
# define ATTRIBUTE_NO_SANITIZE_ADDRESS
#endif
...
ATTRIBUTE_NO_SANITIZE_ADDRESS
void ThisFunctionWillNotBeInstrumented() {...}

Clang 3.1 and 3.2 supported __attribute__((no_address_safety_analysis)) instead.

You may also ignore certain functions using a blacklist: create a file my_ignores.txt and pass it to AddressSanitizer at compile time using -fsanitize-blacklist=my_ignores.txt (This flag is new and is only supported by Clang now):

# Ignore exactly this function (the names are mangled)
fun:MyFooBar
# Ignore MyFooBar(void) if it is in C++:
fun:_Z8MyFooBarv
# Ignore all function containing MyFooBar
fun:*MyFooBar*

FAQ

  • Q: Can AddressSanitizer continue running after reporting first error?

  • A: No, sorry. AddressSanitizer errors are fatal. This design choice allows the tool to be faster and simpler.

  • Q: Why didn't ASan report an obviously invalid memory access in my code?

  • A1: If your errors is too obvious, compiler might have already optimized it out by the time Asan runs.

  • A2: Another, C-only option is accesses to global common symbols which are not protected by Asan (you can use -fno-common to disable generation of common symbols).

  • Q: When I link my shared library with -fsanitize=address, it fails due to some undefined ASan symbols (e.g. asan_init_v4)?

  • A: Most probably you link with -Wl,-z,defs or -Wl,--no-undefined. These flags don't work with ASan.

  • Q: My malloc stacktraces are too short?

  • A: Try to compile your code with -fno-omit-frame-pointer or set ASAN_OPTIONS=fast_unwind_on_malloc=0 (the latter would be a performance killer though unless you also specify malloc_context_size=2 or lower).

  • Q: I'm using dynamic ASan runtime and my program crashes at start with "Shadow memory range interleaves with an existing memory mapping. ASan cannot proceed correctly.".

  • A1: If you are using shared ASan DSO, try LD_PRELOAD'ing Asan runtime into your program.

  • A2: Otherwise you are probably hitting a known limitation of dynamic runtime. Libasan is initialized at the end of program startup so if some preceeding library initializer did lots of memory allocations memory region required for ASan shadow memory could be occupied by unrelated mappings.

  • Q: The PC printed in ASan stack traces is consistently off by 1?

  • A: This is not a bug but rather a design choice. It is hard to compute exact size of preceding instruction on CISC platforms. So ASan just decrements 1 which is enough for tools like addr2line or readelf to symbolize addresses.

  • Q: I've ran with ASAN_OPTIONS=verbosity=1 and ASan tells something like

 ==30654== Parsed ASAN_OPTIONS: verbosity=1
 ==30654== AddressSanitizer: failed to intercept 'memcpy'

  • A: This warning is false (see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58680 for details).

  • Q: I've built my main executable with ASan. Do I also need to build shared libraries?

  • A: ASan will work even if you rebuild just part of your program. But you'll have to rebuild all components to detect all errors.

Comments?

Send comments to address-sanitizer@googlegroups.com or in Google+.

Clone this wiki locally