diff --git a/README.md b/README.md
index 71c8c13..c5f8131 100644
--- a/README.md
+++ b/README.md
@@ -1,4 +1,27 @@
-cncgcodecontroller
+CNC-GCode-Controller
 ==================
+If you use a reprap Controller (like Marlin ...) for a CNC machine then this is your Program ;-)
 
-CNC-GCode-Controller
+### Features:
+* Communication with the Controller over com port
+* Basic movements with preview
+* Loading cnc files
+* Preview of cnc file
+* Autoleveling (at this point only for Marlin firmware because of hit endstop message)
+* Optimise G0 movements
+* Most commonly used Gcodes are translated for a Reprap Controller (Tested with Marlin)
+* Backlash correction
+* Artsupport
+
+### Tutorial Videos:
+  * [en] https://youtu.be/xxbBipRvp5I 
+  * [de] https://youtu.be/hYSPs9B2VUM
+  
+### Infos:
+  http://reprap.org/wiki/CNC_Gcode_controller
+  
+![ccgc](https://cloud.githubusercontent.com/assets/5472845/19075920/327ab30e-8a47-11e6-9517-498ba40fde2b.png)
+![ccgc2](https://cloud.githubusercontent.com/assets/5472845/19075921/32827026-8a47-11e6-8370-83a8877f99bc.png)
+![cncgcode_simplecontrols](https://cloud.githubusercontent.com/assets/7280879/6883509/cc5aa17a-d5b0-11e4-99d4-b629e83e760d.png)
+![cnccontroller2](https://f.cloud.github.com/assets/5472845/1229735/47a2a5e4-27c0-11e3-82fe-a572220cfceb.png)
+![cnccontroller3](https://f.cloud.github.com/assets/5472845/1229736/47b8d0f8-27c0-11e3-904b-6daddec09239.png)