From add290dcfa5b4c97d4c9a45ca0f021de76749a8a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Patrick=20Kn=C3=B6bel?= Date: Sat, 6 May 2017 17:03:53 +0200 Subject: [PATCH 1/2] Update README.md --- README.md | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/README.md b/README.md index 71c8c13..5c5a06c 100644 --- a/README.md +++ b/README.md @@ -2,3 +2,16 @@ cncgcodecontroller ================== CNC-GCode-Controller + +### Tutorial Videos: + * [en] https://youtu.be/xxbBipRvp5I + * [de] https://youtu.be/hYSPs9B2VUM + +### Infos: + http://reprap.org/wiki/CNC_Gcode_controller + +![ccgc](https://cloud.githubusercontent.com/assets/5472845/19075920/327ab30e-8a47-11e6-9517-498ba40fde2b.png) +![ccgc2](https://cloud.githubusercontent.com/assets/5472845/19075921/32827026-8a47-11e6-8370-83a8877f99bc.png) +![cncgcode_simplecontrols](https://cloud.githubusercontent.com/assets/7280879/6883509/cc5aa17a-d5b0-11e4-99d4-b629e83e760d.png) +![cnccontroller2](https://f.cloud.github.com/assets/5472845/1229735/47a2a5e4-27c0-11e3-82fe-a572220cfceb.png) +![cnccontroller3](https://f.cloud.github.com/assets/5472845/1229736/47b8d0f8-27c0-11e3-904b-6daddec09239.png) From 20d9a10f52b052ae88327fe1a84e48b243411d03 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Patrick=20Kn=C3=B6bel?= Date: Sat, 6 May 2017 17:05:43 +0200 Subject: [PATCH 2/2] Update README.md --- README.md | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 5c5a06c..c5f8131 100644 --- a/README.md +++ b/README.md @@ -1,7 +1,17 @@ -cncgcodecontroller +CNC-GCode-Controller ================== +If you use a reprap Controller (like Marlin ...) for a CNC machine then this is your Program ;-) -CNC-GCode-Controller +### Features: +* Communication with the Controller over com port +* Basic movements with preview +* Loading cnc files +* Preview of cnc file +* Autoleveling (at this point only for Marlin firmware because of hit endstop message) +* Optimise G0 movements +* Most commonly used Gcodes are translated for a Reprap Controller (Tested with Marlin) +* Backlash correction +* Artsupport ### Tutorial Videos: * [en] https://youtu.be/xxbBipRvp5I