-
-
Notifications
You must be signed in to change notification settings - Fork 292
New issue
Have a question about this project? # for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “#”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? # to your account
Calibration issue with WaveShare 7" HDMI-LCD (C) #166
Comments
first of all, please provide the (full) output of either evtest or evemu-record when you do one "tap" on the screen. what I suspect is that you should use "module_raw input" instead of "module_raw waveshare..." |
Hello |
Hello, by chance evtest is available as a package. Here is the result with one tap. (and module_raw waveshare)
evemu-record is not available unfortunately. I tried with module_raw input (after backup & reboot), here is the evtest output:
|
I succeed to get a debug-enabled tslib for picoreplayer (Thanks Ralphy). Here is the logs printed on the screen when launching ts_calibrate. Hope this helps. Thank you
|
Any idea? |
1 similar comment
Any idea? |
4 years later...did you make it to work somehow? |
I've found a solution for my case, might help someone stuck on Waveshare touchscreens working with tslib: #187 |
Hello
I try to run Waveshare 7" hdmi (C) on picoreplayer (tinycore) with TSLIB 1.16 compiled for this system.
`tc@piCorePlayer:~$ cat /proc/bus/input/devices
I: Bus=0003 Vendor=0eef Product=0005 Version=0110
N: Name="BYZHYYZHY By ZH851 Mouse"
P: Phys=usb-20980000.usb-1.3.3/input0
S: Sysfs=/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.0/0003:0EEF:0005.0001/input/input0
U: Uniq=c0U585P865
H: Handlers=mouse0 event0 js0
B: PROP=0
B: EV=1b
B: KEY=70000 0 0 0 0 0 0 0 0
B: ABS=3
B: MSC=10
I: Bus=0003 Vendor=0eef Product=0005 Version=0110
N: Name="BYZHYYZHY By ZH851 Touchscreen"
P: Phys=usb-20980000.usb-1.3.3/input0
S: Sysfs=/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.0/0003:0EEF:0005.0001/input/input1
U: Uniq=c0U585P865
H: Handlers=mouse1 event1
B: PROP=0
B: EV=1b
B: KEY=401 0 1 0 0 0 0 0 0 0 0
B: ABS=100 3
B: MSC=10
`
When I use ts_calibrate with event1, the calibration does not work: crosshair is well displayed, bt when I press top-left corner, it jumps immediately to bottom right or further. at the end the calibration file is not correct ad the touchpad does not work.
`#module_raw input
module_raw waveshare vid_pid=0eef:0005 len=25
module pthres pmin=1
module debounce drop_threshold=40
module dejitter delta=100
module linear
`
I tried the debounce mode, no success.
If i tried module_raw waveshare vid_pid=0eef:0005 len=25 i obtained ts_read bad file descriptor.
I'm stuck completly. Don't know if this is a bug or a wrong config.
Thank you
Originally posted by @tparvais in #135 (comment)
The text was updated successfully, but these errors were encountered: