Skip to content
New issue

Have a question about this project? # for a free GitHub account to open an issue and contact its maintainers and the community.

#

By clicking “#”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? # to your account

Jump to bottom

X Axis Home Offset is slightly off. #88

Closed
Poofjunior opened this issue May 10, 2020 · 2 comments
Closed

X Axis Home Offset is slightly off. #88

Poofjunior opened this issue May 10, 2020 · 2 comments
Labels
configs_and_firmware

Comments

@Poofjunior
Copy link
Collaborator

Poofjunior commented May 10, 2020 •
edited
Loading

The default config file lists an offset of -11.5mm.
https://github.com/machineagency/jubilee/blob/master/software/duet_config_files/duet2/sys/config.g#L69
This should be closer to 13.5-to-14mm. (Something between versions was either never correct, or may have changed as printed parts changed.)
@Poofjunior
Copy link
Collaborator Author

From the CAD model, this should be 13.75mm. But since the switch operating position has a tolerance, this location could vary by +/- 0.2mm.

@Poofjunior
Copy link
Collaborator Author

This is now fixed in master.

# for free to join this conversation on GitHub. Already have an account? # to comment
Assignees
No one assigned
Labels
configs_and_firmware
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@Poofjunior