Error: No tuner is available. Please file an issue on dm500-satip.

[pczolee]

Dear Xavi.

I had an dm500 which has been working without any problem for years. Now after an current problem (in the house) it is rebooted, and now it is not working :(. I tried with a new image an a backup as well, but no success :(.

Here is the dmesg:

--- STBx25xx Digital Video Broadcasting drivers ---
GPIO-253 autorequested
Using interrupts: 17 18 19 23
--- STBx25xx MPEG-2 Transport Demultiplexer driver ---
dvb-stbx25xx: resetting demux... done (took 1 ms)
dvb-stbx25xx: Mapped 2097152 bytes of demux memory at 0xc3900000
DVB: registering new adapter (STBx25xx Digital TV device)
GPIO-238 autorequested
ibm-iic0: xfer error, EXTSTS = 0x43
ibm-iic0: xfer error, EXTSTS = 0x73
ibm-iic0: bus is stuck, resetting
ibm-iic0: soft reset
ibm-iic0: init
stbx25xx-dvb dvb.2: could not attach frontend
dvb-stbx25xx: Front-end initialization failed: error -19
dvb-stbx25xx: IBM STBx25xx digital TV hardware driver loaded successfully

What happened? It is died?

Thanks

[mildsunrise]

Seems like a problem with the board, can you flash the original firmware and see if it works?

[pczolee]

Thanks for the reply.
I tried OpenPLI, and the problem looks same (but just one line -which is maybe relevant- in the dmesg: "stv: wake up failed"). The tuner is not recognised (it is unknown in the info screen). What could be cause this?

[mildsunrise]

If it looks like hardware damage I have no clue, sorry...