Failed to compile from source for armv7l (busybox) on #7173

mrvini · 2016-06-06T04:56:17Z

Version: 6.2.1
Platform: busybox (Linux dm3730_zoom_torpedo 3.0.0-ts-armv7l io.js messaging #23 Thu Feb 18 13:29:10 PST 2016 armv7l GNU/Linux)
Subsystem:

I am trying to compile node version 6.2.1 for armv7l (tried using out of the box one before, it would not run for me at all). While I was successfully able to compile all versions prior 6.2.0 (i.e. from 4.x -6.1), 6.2.0 and 6.2.1 start giving me a problem with icu and throws the following error

Options: {'verbose': 1, 'filterfile': 'icu_small.json', 'toolpath': '/var/jenkins_home/jobs/Node/workspace/out/Release', 'deltmpdir': 1, 'outfile': 'icudt57l.dat', 'datfile': '../../deps/icu-small/source/data/in/icudt57l.dat', 'locales': 'en,root', 'endian': 'little', 'tmpdir': '/var/jenkins_home/jobs/Node/workspace/out/Release/obj/gen/icutmp'}
icu_small.json: icutrim.py config: Trim down ICU to just a certain locale set, needed for node.js use.

FAILED: /var/jenkins_home/jobs/Node/workspace/out/Release/icupkg -tl ../../deps/icu-small/source/data/in/icudt57l.dat 

/var/jenkins_home/jobs/Node/workspace/out/Release/obj/gen/icutmp/icudt57l.dat
tools/icu/icudata.target.mk:13: recipe for target '/var/jenkins_home/jobs/Node/workspace/out/Release/obj/gen/icutmp/icudt57l.dat' failed
make[1]: *** [/var/jenkins_home/jobs/Node/workspace/out/Release/obj/gen/icutmp/icudt57l.dat] Error 1

The script that i am using to build it is the following:

#!/bin/sh
export AR=~/timesys/bin/armv7l-timesys-linux-gnueabi-ar
export CC=~/timesys/bin/armv7l-timesys-linux-gnueabi-gcc
export CXX=~/timesys/toolchain/bin/armv7l-timesys-linux-gnueabi-g++
export LINK=~/timesys/bin/armv7l-timesys-linux-gnueabi-g++

export TARGET_ARCH="-march=armv7l"
export TARGET_TUNE="-mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -mthumb-interwork -mno-thumb"

#DEFINE FLAGS
export CXX_TARGET_ARCH="-march-armv7l"
export V8_TARGET_ARCH="-march-armv7l"

make clean
./configure with --without-snapshot;
export DESTDIR="~/dist/node-6.2.1"
make -j4 install

Am I missing some kind of dependencies? Please advise if

bnoordhuis · 2016-06-06T07:21:41Z

I'm not saying it's the cause, but if you want to build with -mfloat-abi=softfp, you should at least pass --with-arm-float-abi=softfp to configure. If you can't get icu to build, see if --without-intl works.

Just to be clear, you're compiling on the target machine itself, right? You're not cross-compiling?

/cc @srl295

mscdex · 2016-06-06T12:05:20Z

I would assume they are cross-compiling if they're setting those environment variables.

mrvini · 2016-06-06T14:55:57Z

We are cross-compiling, @mscdex is correct. I will try to set the flag variable and will report on the results shortly. Thanks

srl295 · 2016-06-06T15:50:25Z

So the /var/jenkins_home/jobs/Node/workspace/out/Release/icupkg file should be run on the host architecture. Is it possible to verify the architecture of that file?
edit From icu-generic.gyp:

      'target_name': 'icupkg',
      'toolsets': [ 'host' ],

so, icupkg ought to be built for the host side.

Actually, I can skip the icutrim step for the small ICU builds and save us some build time, but I am not sure if it will necessarily fix the issue here.

If someone can get instructions for setting up the cross-compilation environment I could try to debug this some also.

mrvini · 2016-06-06T17:15:28Z

@bnoordhuis, I've tried to compile with the correct flags as you've specified and results were successful.

Host System:Linux 38f5fc85140e 3.13.0-61-generic #100-Ubuntu SMP

configure line

./configure --without-snapshot --dest-cpu=arm --dest-os=linux --with-arm-float-abi=softfp --without-intl

To set it for cross compiling, I believe all you need to do is to point env. variables like in the issue that I've posted above

thank you

srl295 · 2016-06-06T17:21:20Z

@mrvini ok - what packages do i need?
edit and can you also try compiling with --with-intl=full-icu --download=all ? This will download the full ICU and build it in a slightly different code path. while i'm debugging this it could add a data point.

mrvini · 2016-06-06T18:15:29Z

@srl295, we are using timesys distribution, and the entire distribution is 530MB, I can attached what's in bin folder if that's sufficient (its only 37MB). We are using timesys embedded linux flavor on the top of busybox. Please let me know

srl295 · 2016-06-06T19:07:07Z

@mrvini I mean - what do I need to compile on the host?

mrvini · 2016-06-06T19:48:29Z

@srl295 , I've added flags that you've recommended

./configure --without-snapshot --dest-cpu=arm --dest-os=linux --with-arm-float-abi=softfp --with-intl=full-icu --download=all;

now I see slightly different error

../../deps/icu/source/data/in/icudt57l.dat "/var/jenkins_home/jobs/Node/workspace/out/Release/obj/gen/icudt57l.dat"
/var/jenkins_home/jobs/Node/workspace/out/Release/icupkg: 1: /var/jenkins_home/jobs/Node/workspace/out/Release/icupkg: Syntax error: word unexpected (expecting ")")
tools/icu/icudata.target.mk:13: recipe for target '/var/jenkins_home/jobs/Node/workspace/out/Release/obj/gen/icudt57l.dat' failed

when I specify small-icu, the error changes

'../../deps/icu-small/source/data/in/icudt57l.dat', 'locales': 'en,root', 'endian': 'little', 'tmpdir': '/var/jenkins_home/jobs/Node/workspace/out/Release/obj/gen/icutmp'}
icu_small.json: icutrim.py config: Trim down ICU to just a certain locale set, needed for node.js use.
FAILED: /var/jenkins_home/jobs/Node/workspace/out/Release/icupkg -tl ../../deps/icu-small/source/data/in/icudt57l.dat /var/jenkins_home/jobs/Node/workspace/out/Release/obj/gen/icutmp/icudt57l.dat

in terms of the variables that I'm settings before I run the .configure script, they are the following

#!/bin/sh
export AR=~/timesys/bin/armv7l-timesys-linux-gnueabi-ar
export CC=~/timesys/bin/armv7l-timesys-linux-gnueabi-gcc
export CXX=~/timesys/bin/armv7l-timesys-linux-gnueabi-g++
export LINK=~/timesys/bin/armv7l-timesys-linux-gnueabi-g++

export TARGET_ARCH="-march=armv7l"
export TARGET_TUNE="-mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -mthumb-interwork -mno-thumb"

#DEFINE FLAGS
export CXX_TARGET_ARCH="-march-armv7l"
export V8_TARGET_ARCH="-march-armv7l"

to compile on the host, I think you need to be able to set up timesys distribution on your machine,, i think bin folder the bin folder for me takes 37MB. I'll check if that's available from timesys website ( i doubt though), those were given to me.

srl295 · 2016-06-07T00:25:55Z

I (maybe) got setup for cross compiling on raspberry pi (set AR/CC/CXX/LINK), and was able to reproduce:

./out/Release/icupkg:                                 ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux.so.3, for GNU/Linux 3.2.0, BuildID[sha1]=364920e9400e9bb597ff0829c9fc56b9026a1ab5, not stripped

So what gives here? Why was icupkg compiled for the target when it's clearly toolset: host?
Looking…

huseyinkozan · 2016-06-08T07:46:03Z

Hello,
I tried to build Node package for OpenWRT MIPS arch for Tessel. I searched what ICU stands for, and I thing we cannot disable it. And also, we should not increase the package size (if possible) due to limitted hardware resources [0].

[0] https://tessel.io/blog/113259439202/tessel-2-hardware-overview

srl295 · 2016-06-08T20:13:20Z

@huseyinkozan You can disable with --without-intl passed to configure, but not sure why you mean you can't disable it.

srl295 · 2016-06-08T20:17:53Z

//cc @nodejs/build

rvagg · 2016-06-08T22:54:39Z

@joaocgreis I figure you might be an ideal person to have a look here since you're our resident cross-compiling expert

joaocgreis · 2016-06-08T23:15:23Z

Host arch detection is done using whatever is in the CXX variable, so it's detecting both the target and the host to be arm.

@mrvini can you add CXX_host and CC_host variables? V8 only supports building for arm in arm and x86 (32-bit) hosts, so the variables need -m32 appended. Something like CXX_host="g++ -m32".

This works well with the Raspberry Pi tools for armv7-a, but I've heard of linking problems with other toolchains. I can't dig into that, but if you get it and can figure it out, it would be great to know.

huseyinkozan · 2016-06-09T00:26:38Z

@srl295 If I disable it, will the APIs depends that work ?

mrvini · 2016-06-09T00:38:45Z

Thanks @joaocgreis , so I"ve tried to add the flag that you've asked for

export CXX_host="g++ -m32"

getting an error

In file included from /usr/include/stdint.h:25:0,
                 from /usr/lib/gcc/x86_64-linux-gnu/4.9/include/stdint.h:9,
                 from ../deps/icu/source/common/unicode/ptypes.h:66,
                 from ../deps/icu/source/common/unicode/umachine.h:44,
                 from ../deps/icu/source/common/unicode/utypes.h:36,
                 from ../deps/icu/source/tools/toolutil/ppucd.cpp:15:
/usr/include/features.h:374:25: fatal error: sys/cdefs.h: No such file or directory
 #  include <sys/cdefs.h>
                         ^
compilation terminated.
tools/icu/icutools.host.mk:530: recipe for target '/var/jenkins_home/jobs/Node/workspace/out/Release/obj.host/icutools/deps/icu/source/tools/toolutil/ppucd.o' failed

srl295 · 2016-06-09T01:07:22Z

@joaocgreis thanks!

@mrvini ok, so now we're getting somewhere, I suppose. You may be missing some of the m32 header files Anyway - I'll test when I get a chance

@huseyinkozan if you disable it then some APIs such as Intl won't work, correct. But perhaps try it, it doesn't add too much space.

huseyinkozan · 2016-06-09T01:20:06Z

@srl295 Firstly, I tried to package icu as an extarnal library and build Node with --with-intl=system-icu. But couldnt pass the required parameters to OpenWRT package (I am not an expert).

I will try to build with --without-intl.

srl295 · 2016-06-09T01:29:05Z

@huseyinkozan try this - pkg-config icu-uc --modversion - it should show a version. If it doesn't work, system-icu won't work. You can install the icu libraries in your system.

huseyinkozan · 2016-06-09T01:39:42Z

@srl295 I called the command :

$ ./host/pkg-config-0.28/pkg-config icu-uc --modversion
57.1

But I couldnt find [0] how to use pkg-config at this OpenWRT Makefile :
https://github.com/huseyinkozan/openwrt-tessel/blob/master/package/node/node/Makefile

[0] https://wiki.openwrt.org/doc/devel/packages

huseyinkozan · 2016-06-09T01:42:56Z

Building with --without-intl parameter success. Thank you @srl295.

srl295 · 2016-06-09T14:53:06Z

@huseyinkozan — welcome.
@joaocgreis @mrvini - adding export CC_host=gcc CXX_host=g++ LINK_host=g++ seemed to work for me for the rpi cross compile. I say seemed because my rPi isn't actually online now.

Note: This isn't really a new requirement — but it seems that only the ICU build process actually requires these to be set properly.

mrvini · 2016-06-09T15:56:39Z

@srl295

I've tried your suggestion and set additional flags

export TARGET_ARCH="-march=armv7l"
export TARGET_TUNE="-mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -mthumb-interwork -mno-thumb"
export CXX_TARGET_ARCH="-march-armv7l"
export V8_TARGET_ARCH="-march-armv7l"
export CXX_host="g++ -m32"
#export CXX_host="g++" 
export CC_host="gcc" 
export LINK_host="g++"

i got the error when I set export CXX_host="g++ -m32"
and got the following error

MMD -MF /var/jenkins_home/jobs/Node/workspace/out/Release/.deps//var/jenkins_home/jobs/Node/workspace/out/Release/obj.host/icutools/deps/icu/source/tools/toolutil/ppucd.o.d.raw   -c -o /var/jenkins_home/jobs/Node/workspace/out/Release/obj.host/icutools/deps/icu/source/tools/toolutil/ppucd.o ../deps/icu/source/tools/toolutil/ppucd.cpp
In file included from /usr/include/stdint.h:25:0,
                 from /usr/lib/gcc/x86_64-linux-gnu/4.9/include/stdint.h:9,
                 from ../deps/icu/source/common/unicode/ptypes.h:66,
                 from ../deps/icu/source/common/unicode/umachine.h:44,
                 from ../deps/icu/source/common/unicode/utypes.h:36,
                 from ../deps/icu/source/tools/toolutil/ppucd.cpp:15:
/usr/include/features.h:374:25: fatal error: sys/cdefs.h: No such file or directory
 #  include <sys/cdefs.h>
                         ^
compilation terminated.

when I set CXX_host="g++" instead, i am getting the following error

"/var/jenkins_home/jobs/Node/workspace/out/Release/obj.target/deps/v8/tools/gyp/libv8_nosnapshot.a" "/var/jenkins_home/jobs/Node/workspace/out/Release/libv8_nosnapshot.a")
  g++ -pthread -rdynamic  -o /var/jenkins_home/jobs/Node/workspace/out/Release/genccode -Wl,--start-group /var/jenkins_home/jobs/Node/workspace/out/Release/obj.host/genccode/deps/icu/source/tools/genccode/genccode.o /var/jenkins_home/jobs/Node/workspace/out/Release/obj.host/genccode/tools/icu/no-op.o /var/jenkins_home/jobs/Node/workspace/out/Release/obj.host/tools/icu/libicutools.a -Wl,--end-group 
/var/jenkins_home/jobs/Node/workspace/out/Release/obj.host/tools/icu/libicutools.a: error adding symbols: Archive has no index; run ranlib to add one
collect2: error: ld returned 1 exit status

do the flags looks ok? or I am missing some?

joaocgreis · 2016-06-09T16:41:16Z

@mrvini as @srl295 pointed above, you need to install support files to compile with -m32. On Ubuntu this is just sudo apt-get install gcc-multilib g++-multilib.

You should also have all the host variables with -m32:

export CXX_host="g++ -m32"
export CC_host="gcc -m32"
export LINK_host="g++ -m32"

mrvini · 2016-06-09T17:12:59Z

@joaocgreis , @srl295 thanks it make sense now and it works :) 👍

just in case anyone might be interested in the future, as @joaocgreis mentioned, install multilib first

sudo dpkg --add-architecture i386
sudo apt-get install gcc-multilib g++-multilib

and the flags are the following

export TARGET_ARCH="-march=armv7l"
export TARGET_TUNE="-mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -mthumb-interwork -mno-thumb"
export CXX_TARGET_ARCH="-march-armv7l"
export V8_TARGET_ARCH="-march-armv7l"
export CXX_host="g++ -m32"
export CC_host="gcc -m32" 
export LINK_host="g++ -m32"

./configure --without-snapshot --dest-cpu=arm --dest-os=linux --with-arm-float-abi=softfp --with-intl=full-icu --download=all;

joaocgreis · 2016-06-09T17:34:30Z

@mrvini Good to know, thanks for the summary!

srl295 · 2016-06-10T16:10:33Z

@mrvini you have --with-intl=full-icu --download=all - that's great, gives you the full i18n data. You can also just omit those flags and you'll get the default for node, English only.

mrvini · 2016-06-10T16:29:30Z

thanks @srl295 , got u

nappy · 2016-07-11T16:32:57Z

@joaocgreis I am trying to get the Intl feature working on android with the suggestions above.

sudo dpkg --add-architecture i386
sudo apt-get install gcc-multilib g++-multilib

export CXX_host="g++ -m32"
export CC_host="gcc -m32"
export LINK_host="g++ -m32"

But I get the following error on the ICU part:

g++ -m32 -rdynamic -fPIE -pie  -o /home/nodejs/node/out/Release/iculslocs /home/nodejs/node/out/Release/obj.host/iculslocs/tools/icu/iculslocs.o /home/nodejs/node/out/Release/obj.host/iculslocs/tools/icu/no-op.o /home/nodejs/node/out/Release/obj.host/tools/icu/libicutools.a -llog
/usr/bin/ld: cannot find -llog

To my knowledge -llog is a android specific library, so how to ensure the flag is not provided to the host toolchain? I found it being set in common.gypi, but I have no clue how to make the switch.

srl295 · 2016-07-11T22:31:41Z

@nappy this seems like a separate issue.

common.gypi has

      [ 'OS=="android"', {
        'defines': ['_GLIBCXX_USE_C99_MATH'],
        'libraries': [ '-llog' ],
      }],

seems like it may need a conditional there? Perhaps it's yet another latent bug that building with intl exposes?

huseyinkozan · 2016-09-09T02:17:07Z

I tried to compile by removing the --without-intl option,

CONFIGURE_ARGS = --dest-cpu=$(DEST_CPU) --dest-os=linux \
  --shared-openssl --shared-openssl-includes="$(STAGING_DIR)/usr/include" --shared-openssl-libpath="$(STAGING_DIR)/usr/lib" \
  --shared-zlib --shared-zlib-includes="$(STAGING_DIR)/usr/include" --shared-zlib-libpath="$(STAGING_DIR)/usr/lib" \
  --v8-options="--max_old_space_size=20 --initial_old_space_size=4 --max_semi_space_size=2 --max_executable_size=5" \
  --without-snapshot --with-mips-arch-variant=r2 --with-mips-fpu-mode=fp32 --with-mips-float-abi=soft

installed 32bit libs with,

sudo dpkg --add-architecture i386
sudo apt-get install gcc-multilib g++-multilib

set *_host flags as noted above,

export CXX_host="g++ -m32"
export CC_host="gcc -m32"
export LINK_host="g++ -m32"

and got this error :

g++ -m32 -pthread -rdynamic  -o /home/hk/p/openwrt-tessel/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/node-v6.5.0/out/Release/genccode -Wl,--start-group /home/hk/p/openwrt-tessel/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/node-v6.5.0/out/Release/obj.host/genccode/deps/icu-small/source/tools/genccode/genccode.o /home/hk/p/openwrt-tessel/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/node-v6.5.0/out/Release/obj.host/genccode/tools/icu/no-op.o /home/hk/p/openwrt-tessel/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/node-v6.5.0/out/Release/obj.host/tools/icu/libicutools.a -Wl,--end-group -L/home/hk/p/openwrt-tessel/openwrt/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/usr/lib -lz -lssl -lcrypto
/usr/bin/ld: skipping incompatible /home/hk/p/openwrt-tessel/openwrt/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/usr/lib/libz.so when searching for -lz
/usr/bin/ld: skipping incompatible /home/hk/p/openwrt-tessel/openwrt/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/usr/lib/libz.a when searching for -lz
/usr/bin/ld: cannot find -lz
/usr/bin/ld: skipping incompatible /home/hk/p/openwrt-tessel/openwrt/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/usr/lib/libssl.so when searching for -lssl
/usr/bin/ld: skipping incompatible /home/hk/p/openwrt-tessel/openwrt/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/usr/lib/libssl.a when searching for -lssl
/usr/bin/ld: cannot find -lssl
/usr/bin/ld: skipping incompatible /home/hk/p/openwrt-tessel/openwrt/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/usr/lib/libcrypto.so when searching for -lcrypto
/usr/bin/ld: skipping incompatible /home/hk/p/openwrt-tessel/openwrt/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/usr/lib/libcrypto.a when searching for -lcrypto
/usr/bin/ld: cannot find -lcrypto
collect2: error: ld returned 1 exit status
tools/icu/genccode.host.mk:136: recipe for target '/home/hk/p/openwrt-tessel/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/node-v6.5.0/out/Release/genccode' failed
make[4]: *** [/home/hk/p/openwrt-tessel/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/node-v6.5.0/out/Release/genccode] Error 1
make[4]: Leaving directory '/home/hk/p/openwrt-tessel/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/node-v6.5.0/out'
Makefile:66: recipe for target 'node' failed
make[3]: *** [node] Error 2
make[3]: Leaving directory '/home/hk/p/openwrt-tessel/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/node-v6.5.0'
Makefile:67: recipe for target '/home/hk/p/openwrt-tessel/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/node-v6.5.0/.built' failed
make[2]: *** [/home/hk/p/openwrt-tessel/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/node-v6.5.0/.built] Error 2
make[2]: Leaving directory '/home/hk/p/openwrt-tessel/package/node/node'
package/Makefile:191: recipe for target 'package/feeds/tessel/node/compile' failed
make[1]: *** [package/feeds/tessel/node/compile] Error 2
make[1]: Leaving directory '/home/hk/p/openwrt-tessel/openwrt'
/home/hk/p/openwrt-tessel/openwrt/include/toplevel.mk:181: recipe for target 'package/node/compile' failed
make: *** [package/node/compile] Error 2

Any idea ?

bnoordhuis · 2016-09-09T06:51:07Z

@huseyinkozan Either install those libraries or omit --shared-openssl, --shared-zlib, etc. if you don't have them?

huseyinkozan · 2016-09-09T09:05:36Z

@bnoordhuis I did:

CONFIGURE_ARGS = --dest-cpu=$(DEST_CPU) --dest-os=linux \
  --shared-openssl --shared-openssl-includes="$(STAGING_DIR)/usr/include" --shared-openssl-libpath="$(STAGING_DIR)/usr/lib" \
  --shared-zlib --shared-zlib-includes="$(STAGING_DIR)/usr/include" --shared-zlib-libpath="$(STAGING_DIR)/usr/lib" \
  --v8-options="--max_old_space_size=20 --initial_old_space_size=4 --max_semi_space_size=2 --max_executable_size=5" \
  --without-snapshot --with-mips-arch-variant=r2 --with-mips-fpu-mode=fp32 --with-mips-float-abi=soft

huseyinkozan · 2016-09-09T09:07:32Z

Hmm, sorry. Miss understand.
They are built, but I thing they built against target, not host (or vice versa).

srl295 · 2016-09-09T15:02:19Z

ICU needs to link and run code on both host and target. Can you make sure the libraries are available on both?

huseyinkozan · 2016-09-09T20:10:11Z

Yes, I have both at host and target.

I tried two different ways; --with-intl=sysyem-icu, and exporting *_host variables with default icu options. One of them fails at genccode, other fails at execinfo.h. Dont remember which one is.

huseyinkozan · 2016-09-10T09:43:30Z

Found execinfo.h issue : #8233. Trying ...

srl295 · 2016-09-10T15:21:26Z

Ok so the execinfo issue is not icu related right?

huseyinkozan · 2016-09-10T19:03:27Z

Yes. I give up with icu. I built with --without-intl option. My trials are here :
https://github.com/huseyinkozan/openwrt-tessel/tree/node-6.5.0

mscdex added build Issues and PRs related to build files or the CI. arm Issues and PRs related to the ARM platform. i18n-api Issues and PRs related to the i18n implementation. labels Jun 6, 2016

srl295 self-assigned this Jun 7, 2016

srl295 added the confirmed-bug Issues with confirmed bugs. label Jun 7, 2016

huseyinkozan mentioned this issue Jun 8, 2016

Update Node to 6.1.0 tessel/openwrt-tessel#58

Closed

joaocgreis closed this as completed Jun 9, 2016

srl295 mentioned this issue Jun 10, 2016

speed up canned small-icu build #7253

Closed

huseyinkozan mentioned this issue Sep 8, 2016

Upgrade to Node 6 tessel/t2-firmware#206

Closed

huseyinkozan mentioned this issue Sep 13, 2016

Node 6.5.0 tessel/openwrt-tessel#68

Closed

mscdex mentioned this issue Dec 1, 2016

failure trying to compile for arm+android #9869

Closed

drumwhizz mentioned this issue Aug 7, 2018

ICU Toolset being compiled by cross compiler, not host compiler #22173

Closed

Failed to compile from source for armv7l (busybox) on #7173

Failed to compile from source for armv7l (busybox) on #7173

Comments

mrvini commented Jun 6, 2016

bnoordhuis commented Jun 6, 2016

mscdex commented Jun 6, 2016

mrvini commented Jun 6, 2016

srl295 commented Jun 6, 2016 • edited Loading

mrvini commented Jun 6, 2016 • edited Loading

srl295 commented Jun 6, 2016 • edited Loading

mrvini commented Jun 6, 2016

srl295 commented Jun 6, 2016

mrvini commented Jun 6, 2016

srl295 commented Jun 7, 2016

huseyinkozan commented Jun 8, 2016

srl295 commented Jun 8, 2016 • edited Loading

srl295 commented Jun 8, 2016

rvagg commented Jun 8, 2016

joaocgreis commented Jun 8, 2016

huseyinkozan commented Jun 9, 2016

mrvini commented Jun 9, 2016

srl295 commented Jun 9, 2016

huseyinkozan commented Jun 9, 2016

srl295 commented Jun 9, 2016

huseyinkozan commented Jun 9, 2016

huseyinkozan commented Jun 9, 2016

srl295 commented Jun 9, 2016

mrvini commented Jun 9, 2016 • edited Loading

joaocgreis commented Jun 9, 2016

mrvini commented Jun 9, 2016

joaocgreis commented Jun 9, 2016

srl295 commented Jun 10, 2016

mrvini commented Jun 10, 2016

nappy commented Jul 11, 2016

srl295 commented Jul 11, 2016 • edited Loading

huseyinkozan commented Sep 9, 2016 • edited Loading

bnoordhuis commented Sep 9, 2016

huseyinkozan commented Sep 9, 2016

huseyinkozan commented Sep 9, 2016

srl295 commented Sep 9, 2016

huseyinkozan commented Sep 9, 2016

huseyinkozan commented Sep 10, 2016

srl295 commented Sep 10, 2016 via email

huseyinkozan commented Sep 10, 2016

srl295 commented Jun 6, 2016 •

edited

Loading

mrvini commented Jun 6, 2016 •

edited

Loading

srl295 commented Jun 6, 2016 •

edited

Loading

srl295 commented Jun 8, 2016 •

edited

Loading

mrvini commented Jun 9, 2016 •

edited

Loading

srl295 commented Jul 11, 2016 •

edited

Loading

huseyinkozan commented Sep 9, 2016 •

edited

Loading