V3.2.2 | Fix DIP switches EEPROM

• Fix DIP switch positions being ignored when EEPROM is set

V3.2.1 | Serial print typo

• Fix emonTx serial print typo, should print 'emonTH FW' in serial config mode

V3.2.0 | RF serial config

V3.2.0

• Configure RF via serial e.g. node ID, group freq
• Send +++ then [Enter] via serial (@115200 baud) at startup to enter config mode
• Ported from recent emonTx V3 update
• Remove RF autodetection (RFM must be present)

https://community.openenergymonitor.org/t/emontx-v3-configure-rf-settings-via-serial-released-fw-v2-6-0/2064

3.1.0

check for sensor & RFM at startup

V3.0.0 - add support for SI7021 to replace DHT22

V3.0.0 firmware requires emonTH V2 hardware. Tested with V2.0.2 hardware

https://community.openenergymonitor.org/t/emonth-v2/1696

V2.0.2 Hardware

As used for first manufacture batch