config.toml

[command.write]
default_hpgl_device = "dxy1150"

[device.dxy1150]
name = "Roland DXY-1150A"
plotter_unit_length = "0.025mm"
pen_count = 8
info = "Configuration from https://github.com/abey79/vpype/pull/81"

[[device.dxy1150.paper]]
name = "a4"
info = "The plotter must be configured in ISO A3 mode (all dip switches off), place a4 paper bottom left (0,0) of the flatbed with the longest side along X."
paper_size = ["297mm", "210mm"]
x_range = [0, 16158]
y_range = [0, 11040]
y_axis_up = true
origin_location = ["0mm", "210mm"]
final_pu_params = "16158,11040"
set_ps = 3

[[device.dxy1150.paper]]
name = "a3"
info = "The plotter must be configured in ISO A3 mode (all dip switches off), place a3 paper bottom left (0,0) of the flatbed with the longest side along X."
paper_size = ["420mm", "297mm"]
x_range = [0, 16158]
y_range = [0, 11040]
y_axis_up = true
origin_location = ["0mm", "297mm"]
final_pu_params = "16158,11040"
set_ps = 3

[[device.dxy1150.paper]]
name = "flexl"
y_axis_up = true
paper_orientation = "landscape"
origin_location = ["15mm", "15mm"]
origin_location_reference = "botleft"
rotate_180 = true
final_pu_params = "0,0"