snoop_filter.hh

/*
 * Copyright (c) 2013 ARM Limited
 * All rights reserved
 *
 * The license below extends only to copyright in the software and shall
 * not be construed as granting a license to any other intellectual
 * property including but not limited to intellectual property relating
 * to a hardware implementation of the functionality of the software
 * licensed hereunder.  You may use the software subject to the license
 * terms below provided that you ensure that this notice is replicated
 * unmodified and in its entirety in all distributions of the software,
 * modified or unmodified, in source code or in binary form.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer;
 * redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution;
 * neither the name of the copyright holders nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * Authors: Stephan Diestelhorst <stephan.diestelhorst@arm.com>
 */

/**
 * @file
 * Definition of a snoop filter.
 */

#ifndef __MEM_SNOOP_FILTER_HH__
#define __MEM_SNOOP_FILTER_HH__

#include <utility>

#include "base/hashmap.hh"
#include "mem/packet.hh"
#include "mem/port.hh"
#include "params/SnoopFilter.hh"
#include "sim/sim_object.hh"
#include "sim/system.hh"

/**
 * This snoop filter keeps track of which connected port has a
 * particular line of data. It can be queried (through lookup*) on
 * memory requests from above (reads / writes / ...); and also from
 * below (snoops). The snoop filter precisely knows about the location
 * of lines "above" it through a map from cache line address to
 * sharers/ports. The snoop filter ties into the flows of requests
 * (when they succeed at the lower interface), regular responses from
 * below and also responses from sideway's caches (in update*). This
 * allows the snoop filter to model cache-line residency by snooping
 * the messages.
 *
 * The tracking happens in two fields to be able to distinguish
 * between in-flight requests (in requested) and already pulled in
 * lines (in holder). This distinction is used for producing tighter
 * assertions and tracking request completion. For safety, (requested
 * | holder) should be notified and the requesting MSHRs will take
 * care of ordering.
 *
 * Overall, some trickery is required because:
 * (1) snoops are not followed by an ACK, but only evoke a response if
 *     they need to (hit dirty)
 * (2) side-channel information is funnelled through direct modifications of
 *     pkt, instead of proper messages through the bus
 * (3) there are no clean evict messages telling the snoop filter that a local,
 *     upper cache dropped a line, making the snoop filter pessimistic for now
 * (4) ordering: there is no single point of order in the system.  Instead,
 *     requesting MSHRs track order between local requests and remote snoops
 */
class SnoopFilter : public SimObject {
  public:
    typedef std::vector<SlavePort*> SnoopList;

    SnoopFilter (const SnoopFilterParams *p) : SimObject(p),
        linesize(p->system->cacheLineSize()), lookupLatency(p->lookup_latency)
    {
    }

    /**
     * Init a new snoop filter and tell it about all the slave ports of the
     * enclosing bus.
     *
     * @param bus_slave_ports Vector of slave ports that the bus is attached to.
     */
    void setSlavePorts(const std::vector<SlavePort*>& bus_slave_ports) {
        slavePorts = bus_slave_ports;
    }

    /**
     * Lookup a request (from a slave port) in the snoop filter and return a
     * list of other slave ports that need forwarding of the resulting snoops.
     * Additionally, update the tracking structures with new request
     * information.
     *
     * @param cpkt          Pointer to the request packet.  Not changed.
     * @param slave_port    Slave port where the request came from.
     * @return Pair of a vector of snoop target ports and lookup latency.
     */
    std::pair<SnoopList, Cycles> lookupRequest(const Packet* cpkt,
                                               const SlavePort& slave_port);

    /**
     * For a successful request, update all data structures in the snoop filter
     * reflecting the changes caused by that request
     *
     * @param cpkt          Pointer to the request packet.  Not changed.
     * @param slave_port    Slave port where the request came from.
     * @param will_retry    This request will retry on this bus / snoop filter
     */
    void updateRequest(const Packet* cpkt, const SlavePort& slave_port,
                       bool will_retry);

    /**
     * Handle an incoming snoop from below (the master port).  These can upgrade the
     * tracking logic and may also benefit from additional steering thanks to the
     * snoop filter.
     * @param cpkt Pointer to const Packet containing the snoop.
     * @return Pair with a vector of SlavePorts that need snooping and a lookup
     *         latency.
     */
    std::pair<SnoopList, Cycles> lookupSnoop(const Packet* cpkt);

    /**
     * Let the snoop filter see any snoop responses that turn into request responses
     * and indicate cache to cache transfers.  These will update the corresponding
     * state in the filter.
     *
     * @param cpkt     Pointer to const Packet holding the snoop response.
     * @param rsp_port SlavePort that sends the response.
     * @param req_port SlavePort that made the original request and is the
     *                 destination of the snoop response.
     */
    void updateSnoopResponse(const Packet *cpkt, const SlavePort& rsp_port,
                             const SlavePort& req_port);

    /**
     * Pass snoop responses that travel downward through the snoop filter and let
     * them update the snoop filter state.  No additional routing happens.
     *
     * @param cpkt     Pointer to const Packet holding the snoop response.
     * @param rsp_port SlavePort that sends the response.
     * @param req_port MasterPort through which the response leaves this cluster.
     */
    void updateSnoopForward(const Packet *cpkt, const SlavePort& rsp_port,
                            const MasterPort& req_port);

    /**
     * Update the snoop filter with a response from below (outer / other cache,
     * or memory) and update the tracking information in the snoop filter.
     *
     * @param cpkt       Pointer to const Packet holding the snoop response.
     * @param slave_port SlavePort that made the original request and is the target
     *                   of this response.
     */
    void updateResponse(const Packet *cpkt, const SlavePort& slave_port);

    /**
     * Simple factory methods for standard return values for lookupRequest
     */
    std::pair<SnoopList, Cycles> snoopAll(Cycles latency) const
    {
        return std::make_pair(slavePorts, latency);
    }
    std::pair<SnoopList, Cycles> snoopSelected(const SnoopList& slave_ports,
                                               Cycles latency) const
    {
        return std::make_pair(slave_ports, latency);
    }
    std::pair<SnoopList, Cycles> snoopDown(Cycles latency) const
    {
        SnoopList empty;
        return std::make_pair(empty , latency);
    }

    virtual void regStats();

  protected:
    typedef uint64_t SnoopMask;
   /**
    * Per cache line item tracking a bitmask of SlavePorts who have an
    * outstanding request to this line (requested) or already share a cache line
    * with this address (holder).
    */
    struct SnoopItem {
        SnoopMask requested;
        SnoopMask holder;
    };
    /**
     * Convert a single port to a corresponding, one-hot bitmask
     * @param port SlavePort that should be converted.
     * @return One-hot bitmask corresponding to the port.
     */
    SnoopMask portToMask(const SlavePort& port) const;
    /**
     * Convert multiple ports to a corresponding bitmask
     * @param ports SnoopList that should be converted.
     * @return Bitmask corresponding to the ports in the list.
     */
    SnoopMask portListToMask(const SnoopList& ports) const;
    /**
     * Converts a bitmask of ports into the corresponing list of ports
     * @param ports SnoopMask of the requested ports
     * @return SnoopList containing all the requested SlavePorts
     */
    SnoopList maskToPortList(SnoopMask ports) const;

  private:
    /** Simple hash set of cached addresses. */
    m5::hash_map<Addr, SnoopItem> cachedLocations;
    /** List of all attached slave ports. */
    SnoopList slavePorts;
    /** Cache line size. */
    const unsigned linesize;
    /** Latency for doing a lookup in the filter */
    const Cycles lookupLatency;

    /** Statistics */
    Stats::Scalar totRequests;
    Stats::Scalar hitSingleRequests;
    Stats::Scalar hitMultiRequests;

    Stats::Scalar totSnoops;
    Stats::Scalar hitSingleSnoops;
    Stats::Scalar hitMultiSnoops;
};

inline SnoopFilter::SnoopMask
SnoopFilter::portToMask(const SlavePort& port) const
{
    unsigned id = (unsigned)port.getId();
    assert(id != (unsigned)InvalidPortID);
    assert((int)id < 8 * sizeof(SnoopMask));

    return ((SnoopMask)1) << id;
}

inline SnoopFilter::SnoopMask
SnoopFilter::portListToMask(const SnoopList& ports) const
{
    SnoopMask m = 0;
    for (auto port = ports.begin(); port != ports.end(); ++port)
        m |= portToMask(**port);
    return m;
}

inline SnoopFilter::SnoopList
SnoopFilter::maskToPortList(SnoopMask port_mask) const
{
    SnoopList res;
    for (auto port = slavePorts.begin(); port != slavePorts.end(); ++port)
        if (port_mask & portToMask(**port))
            res.push_back(*port);
    return res;
}
#endif // __MEM_SNOOP_FILTER_HH__