PrusaControl 0.9.4_415_beta - missing geometry

[Drifter4242]

Slicing this geometry only results in half of it being sliced.

The geometry is somewhat complex, so I suspect something overflowed.

I've attached the stl and screengrab of the result.

grill-r.zip

[prusa3d-bb]

Hello, The Slic3r app detected 8 backwards edges and it tries to fix. Seems able to go over the issue and let you slice. PrusaControl instead cannot sort the issue. You may find this article interesting https://www.prusaprinters.org/repair-3d-models-errors/. Regards — Michele Moramarco Customer Support PRUSA Research +420 222 263 718 +421 220 570 305 188/7a Partyzánská, 17000, Prague shop.prusa3D.com For simple troubleshooting, please use: http://help.prusa3d.com Please rate our reply ...be generous :-)

…

--- original message --- On Sun, Apr 22, 2018 at 10:44 pm, <notifications@github.com> Drifter4242 wrote: Slicing this geometry only results in half of it being sliced. The geometry is somewhat complex, so I suspect something overflowed. I've attached the stl and screengrab of the result. grill-r.zip — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread. --- end of original message ---

[VHCEngineering]

Had a similar issue with text emboss. Was supposed to say JESUS. Printed JES.

[prusa3d-bb]

Hello, Please give it a try selecting "detect thin walls" in our new Slic3r PE in the first "print settings" tab. Even better, print with a 0.25 mm nozzle! You can find some more information in details about this at https://www.prusaprinters.org/everything-about-nozzles-with-a-different-diameter/. Regards — Michele Moramarco Customer Support PRUSA Research +420 222 263 718 +421 220 570 305 188/7a Partyzánská, 17000, Prague shop.prusa3D.com For simple troubleshooting, please use: http://help.prusa3d.com Please rate our reply ...be generous :-)

…

--- original message --- On Wed, Jul 25, 2018 at 05:40 pm, <notifications@github.com> VHCEngineering wrote: Had a similar issue with text emboss. Was supposed to say JESUS. Printed JES. — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or mute the thread. --- end of original message ---