software configuration
In my setup, I use the HDSDR SDR Software, RTL-SDR ExtIO and OmniRig.
The following configurations were made:
Replace the Port with your own Radio port. Find out in Windows Device Manager.
OmniRig setup
HDSDR Front-End IF, tuning and offset configuration
When the signal is converted to the IF, there is a (beautiful article warning) Spectral Inversion. Configure HDSDR to act properly and get the spectrum in the right direction:
I/Q re-invertion settings
Enable HDSDR to use OmniRig for frequency and mode control via the CAT port
HDSDR OmniRig settings
Mouse wheel configuration for proper tuning