voicemeeter using with amateur software

Configuring your Amateur Radio Software with VoiceMeeter

In this example, I'll provide example on how to configure two popular Digital Modes amateur radio softwares; FLDigi and MSHV.

FLDigi

FLDigi is a multiple-mode amateur radio software, supporting a number of different of digitalmodes, like RTTY, PSK, CW, etc.

1. Open FLDigi
2. Go to Configure menu and select Config Dialog
3. Click on the + sign next to the Soundcard category. Click on Devices.
4. Check the PortAudio clause.
5. In Capture, select VM RX Radio B2 (VB-Audio VoiceMeeter AUX VAIO) from the drop-down menu
6. In Playback, select VM TX Radio (VB-Audio VoiceMeeter AUX VAIO) from the drop-down menu
7. Click Save and then Close.

You are all set. Remember to bridge the Radio RX to the B2 bus! See example here

FLDigi Audio Setup with VoiceMeeter Interfaces

MSHV

MSHV is an alternative FT-8 software and I confess that it is my favorite. I don't fancy WSJT-X very much. So here it is how to configure it.

1. Open MSHV
2. In Options menu, select Sound Settings
3. In Direct Sound Output Devices, select VM TX Radio (VB-Audio VoiceMeeter AUX VAIO)
4. In Direct Sound Input Devices, select VM RX Radio B2 (VB-Audio VoiceMeeter AUX VAIO)
5. Click on the (X) at the top of the screen to close it, since there's no OK button

MSHV Audio Setup with VoiceMeeter Interfaces

You are all set. Remember to bridge the Radio RX to the B2 bus! See example here