diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml
index 0e1aad9..030091c 100644
--- a/.github/workflows/build.yml
+++ b/.github/workflows/build.yml
@@ -10,15 +10,20 @@ jobs:
   build:
     runs-on: ubuntu-latest
     steps:
-    - name: Maximize build space
+    - name: Maximize Build Space
       uses: easimon/maximize-build-space@master
       with:
-        root-reserve-mb: 512
+        root-reserve-mb: 10240 
         swap-size-mb: 1024
         remove-dotnet: 'true'
         remove-android: 'true'
         remove-haskell: 'true'
 
+    - name: List Available Space
+      run: |
+        echo "Free space:"
+        df -h
+
     - name: Install Dependencies
       run: |
         sudo apt update
@@ -45,6 +50,7 @@ jobs:
         NOW=$(date +"%Y-%m-%d-%H%M")
         IMAGE=SimpleAQ-${GITHUB_REF##*/}-$NOW
         echo IMG_NAME=$IMAGE > config
+        echo DEPLOY_ZIP=0 >> config
         echo "::set-output name=image::$IMAGE"
 
     # Greatly speed up our build because we don't need a desktop
@@ -58,7 +64,7 @@ jobs:
     - name: Build Image
       run: |
         cd PiGen
-        sudo ./build.sh
+        ./build-docker.sh
 
     # Pi-Gen does weird things with the image file name, so let's make sure we have it right.
     - name: Get Image Name
@@ -67,7 +73,7 @@ jobs:
         cd PiGen
         cd deploy
         ls
-        IMAGE_FILE=$(ls *.zip)
+        IMAGE_FILE=$(ls *.img)
         echo "::set-output name=imagefile::$IMAGE_FILE"
 
     # The image now exists in deploy/.  Let's save it somewhere.
diff --git a/README.md b/README.md
index f8f88d5..15a77ed 100644
--- a/README.md
+++ b/README.md
@@ -2,6 +2,56 @@
 
 Generic firmware for a Raspberry Pi based SimpleAQ device.
 
-TODO:  Where are images stored?
-TODO:  How to flash an image?
-TODO:  Manual configuration of an image for the frontend.
+# I Just Want to Image My Device
+
+## Downloading an Image
+
+First, you will have to select the image you want.
+You can find an image by selecting [Actions](/actions) in this repository, then selecting a successful Build Image run.
+Then, at the bottom of the page you will see Artifacts.
+Click the artifact to download it.
+
+## Writing the Image
+
+You can unzip your image with
+```bash
+unzip your_downloaded_image_file.zip
+```
+
+Once you have the contained `.img` file, you can write it to your MicroSD card.
+First, you will need to find the device corresponding to your MicroSD card.
+```bash
+sudo fdisk -l | grep MicroSD -B 1 -A 5
+```
+
+Now you will have a list of all MicroSD cards attached to your system, whether mounted or not.
+The device name will look like `/dev/sdx`, where x is some letter.
+It is **critical** that you select the correct device name, or you **will** cause unwanted data loss on your host system.
+
+Next, we must ensure that the device is not mounted.
+```bash
+df -h | grep /dev/sdx
+```
+where `/dev/sdx/` is the device name for your MicroSD card will show whether your device is mounted.
+
+For each mounted partition listed, unmount it with
+```bash
+sudo umount /dev/sdxy
+```
+where `x` is your device's letter that you found with `fdisk` and `y` may be a number.
+
+It may be the case that your drive wasn't mounted at all.
+In any event, if your device is mounted, the following step will not work.
+
+Now we will write your image with
+```bash
+sudo dd bs=4M of=/dev/sdx if=your_image_file.img 
+```
+where `x` is your device's letter that you found with `fdisk` above.
+This step may take a while.
+
+You should now be able to mount the `ext4` Linux partition of your written image to inspect the written files.
+
+## Manual Configuration
+
+TODO:  How to manually configure the partition using the output from the frontend.