test_plan.md

Test Plan

1. Create a numeric parameter in the Fusion 360 parameters dialog.

2. Create a new document. It is important that a test is performed with an unsaved document!

3. Create a sketch text with random contents. Assign a text parameter to it. Include letters, _.date, _.version and the previously created parameter. E.g. abc {_.version:04} {_.date}

4. Save the document and see that date and version increases.

5. Change the Fusion 360 parameter. Verify that the sketch text is updated.

6. Create a sketch text with a positive rotation angle and assign a text parameter to it.

7. Create a sketch text with a negative rotation angle (can only be done at text creation) and and assign a text parameter to it. Verify that a dialog box is shown that explains the problem.

8. Create a sketch that that uses an SHX font (e.g. Weidner). Verify that it can be assigned a text parameter without problems.

9. Create a formatted sketch text (e.g. Bold). Verify that it can be assigned a text parameter without problems.

10. Save and close the document.

11. Open the document and verify that the texts are OK.

12. Change a text parameter and verify that the sketch text updates.