Using Resque with Sufia

As of version 7, Sufia no longer packages a default queuing back-end. Sufia 7 builds its jobs using Rails' ActiveJob framework, so you are free to use the queuing system of you choice (e.g. Resque, DelayedJob, Sidekiq) to manage long-running or slow processes. Flexibility and choice come with a cost, though, and there's some work involved in integrating whichever queueing back-end you select. This page offers guidance on installing and using Resque with Resque-pool to handle background jobs in your Sufia app.

Note

You should consider using Sidekiq with Sufia instead of Resque, for it is better maintained and less idiosyncratic. If you must use Resque, see below.

Pre-Requisites: Install and Run Redis

Resque relies on the Redis key-value store, so Redis must be installed and running on your system in order for background workers to pick up jobs.

Code Changes: Install Resque

To use Resque -- learn more about Resque -- as your queueing back-end, you must modify the code created by the Sufia generator. Resque offers instructions for installation; Resque-pool also offers instructions for installation and use. In general, you need to add resque and/or resque-pool to your Gemfile, require resque tasks in your Rakefile, and configure Rails to use Resque as its ActiveJob adapter.

Configure ActiveJob to use resque by adding the following to your application.rb

config.active_job.queue_adapter = :resque

Managing Resque Workers

There are two ways you can manage your workers:

1. the resque:work rake task, which will run in the foreground in the terminal;
2. use resque-pool to manage a number of configurable workers in background processes

For the remainder of the background worker documentation, it is assumed that you're using resque-pool which is more robust, in which case you should make sure you've run through resque-pool's installation process (which involves tweaking your Gemfile and adding Rake tasks) first.

Terminology

Resque

Resque is a message queue that can be used by Sufia to manage long-running or slow processes.

Resque-Pool/pools

Resque-Pool is a tool for managing (starting, stopping) and configuring Resque worker processes. See configuration below for more information.

workers

Workers run the background jobs. Each worker has a copy of your Sufia app which has the jobs code in app/jobs/. The workers listen to queues (by polling Redis) and pull jobs waiting on the queue. Once a worker pulls a job, it will perform the task as expressed by the persisted job. A worker can be dedicated to a single queue or may listen to multiple queues -- this is configurable in config/resque-pool.yml. Multiple workers can also listen to the same queue.

queues

Jobs are sent to queues where they wait until a worker is available to pick them up. Sufia defines a number of queues for processing different background jobs (e.g. batch_update, characterize). Multiple queues are provided to give you the ability to control how many workers work on the different jobs. Why? Some jobs are fast-running, such as all of Sufia's event jobs, and some jobs are slow-running like the characterize job. Using dedicated queues allows you to say, "I only want one worker for characterization but I want five for events," thus making sure characterization jobs serially and event jobs run in parallel.

jobs

A job is a task to be performed, and is encoded in JSON and persisted in Redis. The job includes the name of the method the worker should execute along with any parameters that need to be passed to the method.

Redis

Redis is a key-value store. Resque uses Redis to persist jobs and queues, and Resque-Pool uses Redis to track and manage its worker processes.

Configuration

Resque-pool's configuration file lives in your application at config/resque-pool.yml and you are free to tweak it to meet your needs. The default configuration is to create one worker for all queues:

"*": 1

An example of a common configuration for production-like environments can be seen in ScholarSphere:

batch_update: 3
derivatives: 1
resolrize: 1
audit: 2
event: 5
import_url: 3
sufia: 1
"*": 1

Each line defines a queue name and how many workers should be created to process that queue.

Starting the pool

Prerequisite: Redis must be installed and running on your system in order for background workers to pick up jobs. Unless Redis has already been started, you will want to start it up. You can do this either by calling the redis-server command, or if you're on certain Linuxes, you can do this via sudo service redis-server start.

OPTION 1: Start 1 worker (ignores the resque-pool configuration file). The following command will run until you stop it, so you may want to do this in a dedicated terminal and would typically be used during development only.

IMPORTANT: Change directories to the root of your Sufia app before executing:

RUN_AT_EXIT_HOOKS=true TERM_CHILD=1 QUEUE=* rake environment resque:work

OPTION 2: Start a pool of configurable workers. This is typically used for production-like environments, but may also be used for development. See configuration examples above.

IMPORTANT: Change directories to the root of your Sufia app before executing:

RUN_AT_EXIT_HOOKS=true TERM_CHILD=1 resque-pool --daemon --environment development start

(Occasionally, Resque may not give background jobs a chance to clean up temporary files. The RUN_AT_EXIT_HOOKS variable allows Resque to do so. The TERM_CHILD variable allows workers to terminate gracefully rather than interrupting currently running workers.)

For more information on the signals that Resque-Pool responds to, see the resque-pool documentation on signals.

Restarting the pool

IMPORTANT: Change directories to the root of your Sufia app before executing.

You may be interested in a script to help you manage starting/stopping Resque-Pool. Here's a sample from ScholarSphere.

You may need to adjust it to meet your needs, e.g.: the default location for the pid file is the application's tmp/ directory. You will want to update RESQUE_POOL_PIDFILE to point to the location where your pid file is generated if you use a location other than the default.

Monitoring

Create config/initializers/resque_admin.rb so that ResqueAdmin#matches? returns a true value for the user(s) who should be able to access this page. See below for an example which depends on adding an #admin? method to your user model which checks for specific emails or the 'admin' role. See Admin Users for information on how to add users with the admin role.

class ResqueAdmin
  def self.matches?(request)
    current_user = request.env['warden'].user
    return false if current_user.blank?
    return current_user.admin?
  end
end

Then you need to create the /admin/queues route. In config/routes.rb add require 'resque/server' at the top and the below in the config block:

  # Administrative URLs
  namespace :admin do
    # Job monitoring
    constraints ResqueAdmin do
      mount Resque::Server, at: 'queues'
    end
  end

Troubleshooting

The code executed by workers reflects the state of the code when the workers were started. If the workers are behaving in a way you can't explain, you may have more than one resque-pool master process running. You can also see unusual behaviors if more than one redis-server is running. The information below describes the processes that will be running when everything is operating correctly.

You should see one redis-server process:

$ ps -ef | grep redis-server
user1     7982  7882  0 01:26 pts/3    00:00:00 grep redis-server
root      8398     1  0 00:08 ?        00:00:04 /usr/local/bin/redis-server 0.0.0.0:6379

If you see multiple redis-server processes running, kill them all (assuming they're not serving other important applications on your system) and start redis-server again. You should only have one redis-server process running.

You should see one resque-pool-master process:

$ ps -ef | grep resque-pool
user1    8059  7882  0 01:27 pts/3    00:00:00 grep resque-pool
root     8416     1  0 00:08 ?        00:00:08 resque-pool-master[yourapphere]: managing [8653]

You should see one or more worker processes running:

$ ps -ef | grep resque | grep -v pool-master
root     8653  8416  0 00:08 ?        00:00:01 resque-1.25.2: Waiting for *

If you see multiple resque-pool-master processes running, kill all of them and all of their child processes as well. Start resque-pool again. You should only have one resque-pool-master process running. But you may have multiple worker processes running.

If resque or resque-pool fails to start with the error:

LoadError: No such file to load -- curation_concerns/actors/generic_work_actor

you have not correctly modified your Sufia app to use Resque as a back-end. See Code Changes: Install Resque for more information.