Luci-app-atcommands

LuCI interface for the sms-tool. The user interface supports only AT commands.

Interfejs LuCI dla programu sms-tool. Interfejs tylko do wysyłania poleceń AT.

Installation / Instalacja

Package dependencies for conventional modems.

Modem drivers are required for proper operation.

opkg install kmod-usb-serial kmod-usb-serial-option sms-tool

The sms-tool package is available in the OpenWrt Master repository.

Step 1a. Install sms-tool from Master.

opkg update
opkg install sms-tool

Step 1b. Download the sms-tool package and install manualy.

An example link to the package.

In the link below, replace *architecture* with the architecture of your router, e.g. arm_cortex-a7_neon-vfpv4, mipsel_24kc.

https://downloads.openwrt.org/snapshots/packages/*architecture*/packages/sms-tool_2022-03-21-f07699ab-1_*architecture*.ipk

Example of package installation (file downloaded with wget-ssl).

wget https://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a72/packages/sms-tool_2022-03-21-f07699ab-1_aarch64_cortex-a72.ipk -O /tmp/sms-tool_2022-03-21.ipk
opkg install /tmp/sms-tool_2022-03-21.ipk

Step 2. Add my repository (https://github.com/4IceG/Modem-extras) to the image and follow the commands.

opkg update
opkg install luci-app-atcommands

For images downloaded from eko.one.pl. Installation procedure is similar, only there is no need to manually download the sms-tool package.

User compilation / Kompilacja przez użytkownika

#The package can be added to Openwrt sources in two ways:

cd feeds/luci/applications/
git clone https://github.com/4IceG/luci-app-atcommands.git
cd ../../..
./scripts feeds update -a; ./scripts/feeds install -a
make menuconfig

or e.g.

cd packages/
git clone https://github.com/4IceG/luci-app-atcommands.git
git pull
make package/symlinks
make menuconfig

#You may need to correct the file paths and the number of folders to look like this:
feeds/luci/applications/luci-app-atcommands/Makefile
or
packages/luci-app-atcommands/Makefile

#Then you can compile the packages one by one, an example command:
make V=s -j1 feeds/luci/applications/luci-app-atcommands/compile

Useful AT commands (My list of at commands for Quectel modems) / Przydatne polecenia AT (Moja lista poleceń at dla modemów Quectel'a)

Pokaż | Show me

4x4/2x2 MIMO ON/OFF ➜ AT+QCFG="lte4x4mimo/disable",0;AT+QCFG="lte4x4mimo/disable",0
4x4/2x2 MIMO OFF/ON ➜ AT+QCFG="lte4x4mimo/disable",1;AT+QCFG="lte4x4mimo/disable",1
Disable Cell Lock ➜ AT+QNWLOCK="COMMON/4G",0;AT+QNWLOCK="COMMON/4G",0
Query ➜ AT+QNWLOCK="COMMON/4G";AT+QNWLOCK="COMMON/4G"
CellLock ➜ AT+QNWLOCK="COMMON/4G",NUM OF CELLS,FREQ,PCI;AT+QNWLOCK="COMMON/4G",1,
Check the signal info on each antenna port ➜ AT+QRSRP;AT+QRSRP
Query and Report Signal Strength ➜ AT+QCSQ;AT+QCSQ
Get the temperature of MT ➜ AT+QTEMP;AT+QTEMP
Check the firmware version ➜ AT+GMR;AT+GMR
Band Preferred ➜ AT+QNWPREFCFG="lte_band"?;AT+QNWPREFCFG="lte_band"?
Carrier Agregation Info ➜ AT+QCAINFO;AT+QCAINFO
Query the serving cell information ➜ AT+QENG="servingcell";AT+QENG="servingcell"
Query the information of neighbour cells ➜ AT+QENG="neighbourcell";AT+QENG="neighbourcell"
Query network information ➜ AT+QNWINFO;AT+QNWINFO
Band 1/3/7/8/20/38 ➜ AT+QNWPREFCFG="lte_band",1:3:7:8:20:38;AT+QNWPREFCFG="lte_band",1:3:7:8:20:38
SIM Preferred Message Storage ➜ AT+CPMS="SM","SM","SM";AT+CPMS="SM","SM","SM"
Modem memory preferred Message Storage ➜ AT+CPMS="ME","ME","ME";AT+CPMS="ME","ME","ME"
Save SMS Settings ➜ AT+CSAS;AT+CSAS
Reboot the modem ➜ AT+CFUN=1,1;AT+CFUN=1,1
Reset the modem ➜ AT+CFUN=1;AT+CFUN=1
Reset modem to factory default ➜ AT+QPRTPARA=3;AT+QPRTPARA=3
Save NVM items through reset/reboot ➜ AT+QPRTPARA=1;AT+QPRTPARA=1
QMI/PPP/Default ➜ AT+QCFG="usbnet",0;AT+QCFG="usbnet",0
ECM ➜ AT+QCFG="usbnet",1;AT+QCFG="usbnet",1
MBIM ➜ AT+QCFG="usbnet",2;AT+QCFG="usbnet",2
Set RAT to 4G-LTE only ➜ AT+QNWPREFCFG="mode_pref",LTE;AT+QNWPREFCFG="mode_pref",LTE
Set RAT to LTE & 5G NR ➜ AT+QNWPREFCFG= "mode_pref",LTE:NR5G;AT+QNWPREFCFG= "mode_pref",LTE:NR5G
WCDMA only ➜ AT+QCFG="nwscanmode",2,1;AT+QCFG="nwscanmode",2,1
GSM only ➜ AT+QCFG="nwscanmode",1,1;AT+QCFG="nwscanmode",1,1
Scan all modes ➜ AT+QNWPREFCFG="mode_pref",AUTO;AT+QNWPREFCFG="mode_pref",AUTO

Preview / Podgląd

Thanks to / Podziękowania dla

• obsy (Cezary Jackiewicz)