2024-08-10 RGB LEDs

Panel only update v1.2.0

Added colorful RGB LEDs

esptool.py --chip esp32c6 -p /dev/ttyACM0 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 2MB 0x0 bootloader.bin 0x10000 sw-panel-v3.bin 0x8000 partition-table.bin

2024-07-14 Expander 003 Slow

Expander 003

• Run CH32V003 at 1.5MHz (instead of 48MHz).
• No PLL
• WFE
• Lower Current 0.45 mA (instead of 5.93 mA)
• Hope for less RF noise

Unlock (first time)

~/work/github/cnlohr/ch32v003fun/minichlink/minichlink -D

Program

~/work/github/cnlohr/ch32v003fun/minichlink/minichlink -w main.bin flash -b

2024-06-27 v1.1.1

v1.1.1

Panel (updated) v1.1.1

esptool.py --chip esp32c6 -p /dev/ttyACM0 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 2MB 0x0 bootloader.bin 0x10000 sw-panel-v3.bin 0x8000 partition-table.bin

Expander 003

Unlock (first time)

~/work/github/cnlohr/ch32v003fun/minichlink/minichlink -D

Program

~/work/github/cnlohr/ch32v003fun/minichlink/minichlink -w main.bin flash -b

2024-06-23

XAPOH 9.1.1

Panel

esptool.py --chip esp32c6 -p /dev/ttyACM0 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 2MB 0x0 bootloader.bin 0x10000 sw-panel-v3.bin 0x8000 partition-table.bin

Expander 003

Unlock (first time)

~/work/github/cnlohr/ch32v003fun/minichlink/minichlink -D

Program

~/work/github/cnlohr/ch32v003fun/minichlink/minichlink -w main.bin flash -b