CHANGELOG.md

CHANGELOG

0.2.0 (2025-02-10)

This is a new semver incompatible release of Jiff. It contains several breaking changes. I expect most users of Jiff to be able to upgrade without any changes. The fundamental API organization of Jiff has not changed.

Some of the highlights of this release include reducing footguns and better ecosystem integration.

For reducing footguns, APIs on Span will no longer implicitly assume that days are always 24 hours long. And Span no longer implements PartialEq or Eq (instead favoring span.fieldwise() to create a value that supports naive fieldwise comparison). Moreover, when using TimeZone::system() (perhaps via Zoned::now()), if the system time zone could not be detected, then a special Etc/Unknown time zone will be used instead. This avoids erroring, but also surfaces itself to make it clearer that something has (perhaps) gone wrong.

As for ecosystem integration, this release coincides with the publication of the jiff-icu, jiff-sqlx and jiff-diesel crates. jiff-icu integrates with the ICU4X project, and is now the recommended way to use Jiff to work with non-Gregorian calendars or to localize datetimes for end users. jiff-sqlx and jiff-diesel provide wrapper types that implement the necessary traits to make it ergonomic to store and retrieve Jiff values in a database using SQLx or Diesel, respectively.

Unless something unexpected happens, my plan is for the next breaking change release to be Jiff 1.0 in about 6 months. Once Jiff 1.0 is out, I plan to commit to it indefinitely.

BREAKING CHANGES:

This is an exhaustive list of breaking changes. Changes with the bolded RUNTIME prefix are changes that will not be caught by the Rust compiler. That is, they are changes in runtime behavior.

• #28: The deprecated intz routines on Zoned, Timestamp, civil::DateTime and civil::Date have been removed. You can use in_tz instead. This change was made because many found the name intz to be unclear.
• #32: The PartialEq and Eq trait implementations on Span have been removed. Ideally these shouldn't have been used, but if you do need them, please use Span::fieldwise to create a SpanFieldwise, which does have the PartialEq and Eq traits implemented. These were removed on Span itself because they made it very easy to commit subtle bugs.
• #36: Turn panics during Timestamp::saturing_add into errors. Callers adding spans that are known to contain units of hours or smaller are guaranteed that this will not return an error.
• RUNTIME #48: On Span APIs, days are no longer silently assumed to always be 24 hours when a relative datetime is not provided. Instead, to perform operations on units of days or bigger, callers must either provide a relative date or opt into invariant 24-hour days with SpanRelativeTo::days_are_24_hours. Shortcuts have been added to the span builders. For example, SpanTotal::days_are_24_hours.
• RUNTIME #147: Change the behavior of the deprecated %V conversion specifier in jiff::fmt::strtime from formatting an IANA time zone identifier to formatting an ISO 8601 week number. To format an IANA time zone identifier, use %Q or %:Q (which were introduced in jiff 0.1).
• RUNTIME #212: When parsing into a Zoned with a civil time corresponding to a gap, we treat all offsets as invalid and return an error. Previously, we would accept the offset as given. This brings us into line with Temporal's behavior. For example, previously Jiff accepted 2006-04-02T02:30-05[America/Indiana/Vevay] but will now return an error. This is desirable for cases where a datetime in the future is serialized before a change in the daylight saving time rules. For more examples, see jiff::fmt::temporal::DateTimeParser::offset_conflict for details on how to change Jiff's default behavior. This behavior change also applies to tz::OffsetConflict::PreferOffset.
• RUNTIME #213: Tweak the semantics of tz::TimeZoneDatabase so that it only initializes one internal tzdb instead of trying to find as many as possible. It is unlikely that you'll be impacted by this change, but it's meant to make the semantics be a bit more sensible. (In jiff 0.1, it was in theory possible for one tz lookup to succeed in the system zoneinfo and then another tz lookup to fail in zoneinfo but succeed automatically via the bundled copy. But this seems confusing and possibly not desirable. Hence the change.)
• #218: In order to make naming a little more consistent between Zoned and civil::Date, the civil::Date::to_iso_week_date and civil::ISOWeekDate::to_date APIs were renamed to civil::Date::iso_week_date and civil::ISOWeekDate::date.
• #220: Remove Span::to_duration for converting a Span to a std::time::Duration and rename Span::to_jiff_duration to Span::to_duration. This prioritizes SignedDuration as the "primary" non-calendar duration type in Jiff. And makes it more consistent with APIs like Zoned::duration_since. For non-calendar spans, the TryFrom<Span> for std::time::Duration still exists. For calendar durations, use Span::to_duration and then convert the SignedDuration to std::time::Duration. Additionally, Timestamp::from_jiff_duration and Timestamp::as_jiff_duration were renamed to Timestamp::from_duration and Timestamp::as_duration, respectively. The old deprecated routines on the unsigned std::time::Duration have been removed.
• #221: Change the type of the value yielded by the jiff::tz::TimeZoneNameIter iterator from String to jiff::tz::TimeZoneName. This opaque type is more API evolution friendly. To access the string, either use TimeZoneName's Display trait implementation, or its as_str method.
• #222: Split TimeZone::to_offset into two methods. One that just returns the offset, and another, TimeZone::to_offset_info, which includes the offset, DST status and time zone abbreviation. The extra info is rarely needed and is sometimes more costly to compute. Also, make the lifetime of the time zone abbreviation returned by TimeZoneTransition::abbreviation tied to the transition instead of the time zone (for future API flexibility, likely in core-only environments). This change was overall motivated by wanting to do less work in the common case (where we only need the offset), and for reducing the size of a TimeZone considerably in core-only environments. Callers previously using TimeZone::to_offset to get DST status and time zone abbreviation should now use TimeZone::to_offset_info.
• RUNTIME #230: When TimeZone::system() cannot find a system configured time zone, jiff 0.1 would automatically fall back to TimeZone::UTC (with a WARN-level log message). In jiff 0.2, the fall back is now to TimeZone::unknown(), which has a special Etc/Unknown identifier (as specified by Unicode and reserved by the IANA time zone database). The fallback otherwise still behaves as if it were TimeZone::UTC. This helps surface error conditions related to finding the system time zone without causing unrecoverable failure.

Enhancements:

• #136: When the special SpanRelativeTo::days_are_24_hours() marker is used, weeks will also be treated as invariant. That is, seven 24-hour days. In all cases, working with years and months still requires a relative date.
• #228: It is now possible to forcefully use a bundled copy of the IANA time zone database without relying on disabling crate features. This can be done by enabling the tzdb-bundle-always crate feature and explicitly creating a jiff::tz::TimeZoneDatabase::bundled() database. Once in hand, you must use APIs like TimeZoneDatabase::get to create a TimeZone and avoid any APIs that implicitly use the global time zone database (like Timestamp::in_tz or even Zoned::from_str).
• #238: Add integration with the ICU4X project via the jiff-icu crate. jiff-icu provides traits for easily converting between datetime types defined in Jiff and datetime types defined in ICU4X.
• #240: Add integration with the SQLx project via the jiff-sqlx crate. jiff-sqlx provides wrapper types that implement the necessary traits in SQLx for reasonably ergonomic integration. This includes PostgreSQL and SQLite support, but not MySQL support. (It's not clear if it's possible at present to provide MySQL supprot fro SQLx for datetime types outside of SQLx itself.)
• #241: Add integration with the Diesel project via the jiff-diesel crate. jiff-diesel provides wrapper types that implement the necessary traits in Diesel for reasonably ergonomic integration. This includes MySQL, PostgreSQL and SQLite support.

0.1.29 (2025-02-02)

This release includes a few small enhancements and a bug fix. In particular, there is now Serde support for TimeZone and the ISOWeekDate API has been filled out a bit more.

Unless a serious issue is uncovered, my plan is that this will be the last release before jiff 0.2.

Enhancements:

• #89: Opt-in support for using Serde with jiff::tz::TimeZone has been added.
• #227: The civil::ISOWeekDate API has been beefed up with a few convenience methods.
• #233: Add tz::Offset::round for rounding time zone offsets.

Bug fixes:

• #231: Use more flexible offset equality when parsing offsets with fractional minutes.

0.1.28 (2025-01-27)

This is a small release that just removes the dev-dependency on serde_yml. It has been replaced with the deprecated serde_yaml. See this post about serde_yml shenanigans for why this was done. Note that this was only a dev-dependency and thus doesn't impact folks using Jiff.

Bug fixes:

• #225: Remove dependency on serde_yml in favor of serde_yaml.

0.1.27 (2025-01-25)

This is a small release with a bug fix for precision loss in some cases when doing arithmetic on Timestamp or Zoned.

Bug fixes:

• #223: Fix the check for fractional seconds before taking the fast path.

0.1.26 (2025-01-23)

This is a small release with another deprecation and a new API for doing prefix parsing via strptime. There's also a bug fix for a corner case when dealing with daylight saving time gaps with the Zoned::with API.

Deprecations:

• #210: Deprecate ISOWeekDate::to_date in favor of ISOWeekDate::date.

Enhancements:

• #209: Add fmt::strtime::BrokenDownTime::parse_prefix for parsing only a prefix.

Bug fixes:

• #211: Fix unintuitive behavior of Zoned::with when time falls in a DST gap.

0.1.25 (2025-01-21)

This release contains a number of deprecations in preparation for a jiff 0.2 release. The deprecations are meant to facilitate a smoother transition. The deprecations, when possible, come with new APIs that will permit users to write forward compatible code that will work in both jiff 0.1 and jiff 0.2.

This release also includes a handful of new conversion specifiers in Jiff's strftime and strptime APIs. This improves compatibility with the analogous implementation with GNU libc.

Deprecations:

• #28: The intz methods on Zoned, Timestamp, civil::DateTime and civil::Date have been deprecated in favor of in_tz.
• #32: The Eq and PartialEq trait implementations on Span have been deprecated in favor of using the new SpanFieldwise type.
• #48: Silently assuming days are always 24 hours in some Span APIs has now been deprecated. This will become an error in jiff 0.2. To continue assuming days are 24 hours without a relative reference date, you can use the new SpanRelativeTo::days_are_24_hours API. In jiff 0.1, you'll seen a WARN-level log message emitted if you're code will be broken by jiff 0.2.
• #147: Both %V and %:V have been deprecated in favor of %Q and %:Q. In jiff 0.2, %V will correspond to the ISO 8601 week number and %:V will result in an error. This change was made to improve compatibility with other strtime implementations. %V and %:V continue to correspond to IANA time zone identifiers in jiff 0.1, but using them for parsing or formatting will result in a WARN-level deprecation message.

Enhancements:

• #147: Adds a number of new conversion specifiers to Jiff's strftime and strptime APIs. Specifically, %C, %G, %g, %j, %k, %l, %n, %R, %s, %t, %U, %u, %W, %w. Their behavior should match the corresponding specifiers in GNU libc.

0.1.24 (2025-01-16)

This release updates Jiff's bundled copy of the IANA Time Zone Database to 2025a. See the 2025a release announcement for more details.

Enhancements:

• #206: Update jiff-tzdb to 2025a.

0.1.23 (2025-01-13)

This release includes some bug fixes, particularly for compilation on aarch64-linux-android. There are also some minor enhancements, such as making Zoned::iso_week_date a convenience function for civil::Date::iso_week_date, in line with similar functions.

My current plan is to make a reasonably quick transition to jiff 0.2 with a few pending breaking changes. I will be making some jiff 0.1 releases with deprecations in order to make the transition as smooth as possible. If all goes well with jiff 0.2, then my plan is still to do a Jiff 1.0 release in the Summer of 2025.

Deprecations:

• #197: Date::to_iso_week_date has been deprecated in favor of Date::iso_week_date.

Enhancements:

• #196: Improve ISO week date documentation regarding weekday offsets.
• #197: Add Zoned::iso_week_date, DateTime::iso_week_date and Date::iso_week_date.

Bug fixes:

• #200: Fix compilation failure on Android in a Termux shell.
• #202: Re-add license files to crate artifact.

0.1.22 (2025-01-12)

This release adds support for Android. This support means that Jiff will automatically read its special concatenated time zone database, and will read the persist.sys.timezone property to determine the system's current time zone.

See PLATFORM for more specific information about Android support.

Note that this release also removed all non-essential files (including tests and test data) for the artifact uploaded to crates.io. If you need or want these files, please open a new issue.

Enhancements:

• #140: Add support for the Android platform.

0.1.21 (2025-01-04)

This release includes a new API for setting the unit designator label in a friendly formatted duration for zero-length durations.

Enhancements:

• #192: Add option to the friendly printer for setting the unit when writing a zero-length duration.

0.1.20 (2025-01-03)

This release inclues a new type, Pieces, in the jiff::fmt::temporal sub-module. This exposes the individual components of a parsed Temporal ISO 8601 datetime string. It allows users of Jiff to circumvent the checks in the higher level parsing routines that prevent you from shooting yourself in the foot.

For example, parsing into a Zoned will return an error for raw RFC 3339 timestamps like 2025-01-03T22:03-05 because there is no time zone annotation. Without a time zone, Jiff cannot do time zone aware arithmetic and rounding. Instead, such a datetime can only be parsed into a Timestamp. This lower level Pieces API now permits users of Jiff to parse this string into its component parts and assemble it into a Zoned if they so choose.

Enhancements:

• #188: Add fmt::temporal::Pieces for granular datetime parsing and formatting.

0.1.19 (2025-01-02)

This releases includes a UTF-8 related bug fix and a few enhancements.

Firstly, a Span's default Display implementation now writes uppercase unit designator labels. That means you'll get P1Y2M3DT4H5M6S instead of P1y2m3dT4h5m6s by default. You can restore previous behavior via jiff::fmt::temporal::SpanPrinter::lowercase. This change was made to improve interoperability.

Secondly, SignedDuration now supports rounding via SignedDuration::round. Note that it only supports rounding time units (hours or smaller). In order to round with calendar units, you'll still need to use a Span.

Enhancements:

• #130: Document value ranges for methods like year, day, hour and so on.
• #187: Add a rounding API (for time units only) on SignedDuration.
• #190: Span and SignedDuration now use uppercase unit designator labels in their default ISO 8601 Display implementation.

Bug fixes:

• #155: Relax strftime format strings from ASCII-only to all of UTF-8.

0.1.18 (2024-12-31)

This release includes a few minor enhancements. Namely, the ability to iterate over time zone transitions (in the future or the past), and some improvements to failure modes when Timestamp and Span arithmetic fails.

Enhancements:

• #144: Add APIs for iterating over the transitions of a time zone.
• #145: Improve docs and error messages around fallible Timestamp arithmetic.

0.1.17 (2024-12-31)

This release enhances Jiff's support for no_std environments by making its alloc feature optional. When alloc is disabled, only fixed offset time zones are supported and error messages are significantly degraded. If you have core-only use cases for Jiff, I'd love to hear about them on the issue tracker.

Enhancements:

• #162: Support platforms that do not have atomics in std.
• #168: Jiff now supports disabling the alloc feature, which enables core-only mode.
• #169: Add TimeZone::to_fixed_offset for accessing an invariant offset if possible.

0.1.16 (2024-12-26)

This release includes a new jiff::fmt::friendly module for formatting and parsing durations in a more human readable format than what ISO 8601 specifies. ISO 8601 remains the "default" duration format in Jiff due to its widespread support. Here are some examples:

40d
40 days
1y1d
1yr 1d
3d4h59m
3 days, 4 hours, 59 minutes
3d 4h 59m
2h30m
2h 30m
1mo
1w
1 week
1w4d
1 wk 4 days
1m
0.0021s
0s
0d
0 days
3 mins 34s 123ms
3 mins 34.123 secs
3 mins 34,123s
1y1mo1d1h1m1.1s
1yr 1mo 1day 1hr 1min 1.1sec
1 year, 1 month, 1 day, 1 hour, 1 minute 1.1 seconds
1 year, 1 month, 1 day, 01:01:01.1

To quickly demonstrate this new feature, here's a simple CLI program using Clap:

use clap::Parser;
use jiff::{Span, Zoned};

#[derive(Parser, Debug)]
#[command(version, about, long_about = None)]
struct Args {
    duration: Span,
}

fn main() {
    let args = Args::parse();
    println!("adding duration to now: {}", &Zoned::now() + args.duration);
}

And running the program:

$ cargo run -q -- '1 year, 2 months, 5 hours'
adding duration to now: 2026-02-26T18:58:22-05:00[America/New_York]
$ cargo run -q -- 'P1Y2MT5H'  # ISO 8601 durations are supported too!
adding duration to now: 2026-02-26T19:00:57-05:00[America/New_York]

With Jiff, you should no longer need to pull in crates like humantime and humantime-serde to accomplish a similar task.

While this new format doesn't support any kind of internationalization, the prevalence of the humantime crate suggests there's a desire for something like this. The "friendly" format is meant to service all the same use cases as humantime does for durations, but in a way that doesn't let you shoot yourself in the foot.

The new "friendly" format is now the default for the Debug implementations of both Span and SignedDuration. It's also available via the "alternate" Display implementations for Span and SignedDuration as well. Moreover, the FromStr trait implementations for both Span and SignedDuration will parse both the ISO 8601 duration and this new "friendly" format. Finally, when serde integration is enabled, the Deserialize implementations for SignedDuration and Span also automatically parse either ISO 8601 or the friendly format. For serialization, ISO 8601 remains the default, but the jiff::fmt::serde module provides easy to use helpers to switch to the friendly format.

The jiff::fmt::friendly module documentation provides many more details, including a complete grammar for the format.

Enhancements:

• #143: Add Hash implementation for Zoned and Timestamp.

Bug fixes:

• #60: Use a better Debug output format for SignedDuration and Span.
• #111: Add a new "friendly" duration format.
• #138: Fix deserialization in serde_yml and serde_yaml crates.
• #161: Fix serde dependency configuration so that it builds in no-std mode.

0.1.15 (2024-11-30)

This release fixes a bug where Jiff would sometimes fail to parse TZif files (found, typically, in /usr/share/zoneinfo on Unix systems). This occurred when the TZif file contained a time zone transition outside the range of Jiff's Timestamp type (which is -9999-01-01 to 9999-12-31). The bug fix works by clamping the out-of-range transitions to Jiff's supported range.

This bug only seems to occur in some environments where their TZif files contain more extreme values than what is typically found.

Bug fixes:

• #163: Fix a bug where Jiff would fail to parse some TZif files.

0.1.14 (2024-11-01)

This release introduces new APIs to the RFC 2822 printer that explicitly print timestamps in a format strictly compatible with RFC 9110.

Enhancements:

• #151: Add rfc2822::DateTimePrinter::timestamp_to_rfc9110_string method.

0.1.13 (2024-09-07)

This release introduces a new jiff::tz::TimeZone::try_system API. It is like TimeZone::system, but returns an error instead of an automatic fall back to UTC when the system time zone could not be discovered.

This also includes an update to the bundled IANA Time Zone Database to the 2024b release in the jiff-tzdb crate. As a reminder, the bundled database is not used or included on Unix platforms by default. See PLATFORM for more details.

Enhancements:

• #65: Add TimeZone::try_system for fallibly determining the system's time zone.
• #125: Update to the 2024b release of the IANA Time Zone Database.

0.1.12 (2024-08-31)

This release introduces some new minor APIs that support formatting Timestamp values as RFC 3339 strings with a specific offset.

Previously, using the standard formatting routines that Jiff provides, it was only possible to format a Timestamp using Zulu time. For example:

use jiff::Timestamp;

assert_eq!(
    Timestamp::UNIX_EPOCH.to_string(),
    "1970-01-01T00:00:00Z",
);

This is fine most use cases, but it can be useful on occasion to format a Timestamp with a specific offset. While this isn't as expressive as formatting a datetime with a time zone (e.g., with an IANA time zone identifier), it may be useful in contexts where you just want to "hint" at what a user's local time is. To that end, there is a new Timestamp::display_with_offset method that makes this possible:

use jiff::{tz, Timestamp};

assert_eq!(
    Timestamp::UNIX_EPOCH.display_with_offset(tz::offset(-5)).to_string(),
    "1969-12-31T19:00:00-05:00",
);

A corresponding API was added to jiff::fmt::temporal::DateTimePrinter for lower level use.

Moreover, this release also includes new convenience APIs on the Temporal and RFC 2822 printer types for returning strings. For example, previously, if you were using the RFC 2822 printer to format a Timestamp, you had to do this:

use jiff::{fmt::rfc2822::DateTimePrinter, Timestamp};

let mut buf = String::new();
DateTimePrinter::new().print_timestamp(&Timestamp::UNIX_EPOCH, &mut buf).unwrap();
assert_eq!(buf, "Thu, 1 Jan 1970 00:00:00 -0000");

But now you can just do this:

use jiff::{fmt::rfc2822::DateTimePrinter, Timestamp};

assert_eq!(
    DateTimePrinter::new().timestamp_to_string(&Timestamp::UNIX_EPOCH).unwrap(),
    "Thu, 1 Jan 1970 00:00:00 -0000",
);

Enhancements:

• #122: Support formatting Timestamp to an RFC 3339 string with a specific offset.

0.1.11 (2024-08-28)

This release includes a few small enhancements that have been requested over the last several weeks. The biggest enhancement is a new jiff::fmt::serde sub-module. It provides convenience routines similar to Chrono's chrono::serde sub-module for serializing and deserializing between a jiff::Timestamp and an integer number of seconds, milliseconds, microseconds or nanoseconds. For example:

use jiff::Timestamp;

#[derive(serde::Serialize, serde::Deserialize)]
struct Record {
    #[serde(with = "jiff::fmt::serde::timestamp::second::required")]
    timestamp: Timestamp,
}

let json = r#"{"timestamp":1517644800}"#;
let got: Record = serde_json::from_str(&json).unwrap();
assert_eq!(got.timestamp, Timestamp::from_second(1517644800).unwrap());
assert_eq!(serde_json::to_string(&got).unwrap(), json);

If you need to support optional timestamps via Option<Timestamp>, then use jiff::fmt::serde::timestamp::second::optional instead. Similarly, if you need to support milliseconds instead of seconds, then replace second with millisecond in the module path.

Enhancements:

• #78: Add BrokenDownTime::set_{offset,iana_time_zone} APIs.
• #93: Add note about using Timestamp::now().to_zoned() instead of Zoned::now().with_time_zone().
• #101: Add new jiff::fmt::serde module for integration with integer timestamps.
• #117: Remove unsafe usage in libm functions (applicable only to no-std users).

0.1.10 (2024-08-23)

This release features a small bug fix where Jiff will detect an IANA time zone identifier in some cases where it wouldn't before. While Jiff would previously read the symlink metadata on /etc/localtime by default to discover the system configured time zone on Unix systems, it wouldn't do so when TZ=/etc/localtime. There's really no reason not to, so this release of Jiff is fixed to use symlink sniffing on file paths provided by thw TZ environment variable.

Bug fixes:

• #113: When TZ=/etc/localtime, use symlink metadata to detect IANA identifier.

0.1.9 (2024-08-23)

This release introduces new options for controlling the precision of fractional seconds when printing Zoned, Timestamp, civil::DateTime or civil::Time values. This is principally exposed via jiff::fmt::temporal::DateTimePrinter::precision, but it's also available via the standard library's formatting machinery. For example, if zdt is a jiff::Zoned, then format!("{zdt:.6}") will format it into a string with microsecond precision, even if its fractional component is zero.

Enhancements:

• #92: Support setting the precision of fractional seconds when printing datetimes.

0.1.8 (2024-08-19)

This releases fixes a build error in Jiff's alloc-only configuration. This regression was introduced in jiff 0.1.6.

Bug fixes:

• #108: Use core::time::Duration everywhere instead of std::time::Duration.

0.1.7 (2024-08-18)

This release relaxes Jiff's dependency on windows-sys to include multiple semver incompatible releases. The purpose of this relaxation is to enable Jiff to work with different versions of windows-sys in the hopes that this reduces the likelihood that multiple copies of windows-sys are included in your dependency tree.

Dependencies:

• #106: Relax windows-sys dependency constraint to >=0.52.0, <=0.59.*.

0.1.6 (2024-08-18)

This release includes a new top-level type, SignedDuration, that provides a near exact replica of std::time::Duration, but signed. It is meant to provide alternative APIs for working with durations at a lower level than what Span provides, and to facilitate better integration with the standard library.

A SignedDuration has also been integrated with all of Jiff's datetime types. For example, previously, Zoned::checked_add only accepted a concrete jiff::Span. But now it accepts a jiff::Span, jiff::SignedDuration or even a std::time::Duration. Moreover, all of the until and since APIs on datetime types have been ported and copied to return SignedDuration under the duration_until and duration_since names.

This marks an initial integration phase with SignedDuration. It is planned to integrate it more with the datetime types. Currently, there are integrations on Timestamp and Span, but more will be added in the future.

Overall, folks should still use Span. That is the intended default duration type in Jiff and will continue to be. Users of Jiff may find SignedDuration useful in contexts where speed is important or when one needs to integrate with the standard library.

This release also includes a few related deprecations as the APIs involving std::time::Duration are phased out in favor of SignedDuration.

Deprecations:

• Timestamp::as_duration: replaced with as_jiff_duration, which will be renamed to as_duration in jiff 0.2.
• Timestamp::from_duration: replaced with from_jiff_duration, which will be renamed to from_duration in jiff 0.2.
• Timestamp::from_signed_duration: replaced with from_jiff_duration.
• Span::to_duration: replaced with to_jiff_duration, which will be renamed to to_duration in jiff 0.2.

Basically, all of the above APIs either accept or return a std::time::Duration. To avoid breaking chnages at this point, new methods for SignedDuration were added. For example, Timestamp::as_jiff_duration. In jiff 0.2, the above deprecated methods will be removed and replaced with equivalent methods that accept or return a SignedDuration instead. Callers can then convert between a SignedDuration and a std::time::Duration using appropriate TryFrom trait implementations.

Enhancements:

• #21: Add new top-level SignedDuration type.
• #90: Improve error message when using Span with >=day units with a Timestamp.

Performance:

• #104 Optimize offset calculations in time zones without DST.
• #105 Optimize offset calculations for timestamps after last DST rule change.

0.1.5 (2024-08-09)

This release includes some improvements and bug fixes, particularly for Jiff's strtime APIs.

Enhancements:

• #63: Add link to original Chrono maintainer's commentary in DESIGN.md.
• #75: Add support for %V for formatting and parsing IANA time zone identifiers.
• #79: Add devcontainer.json to support GitHub Codespaces.
• #85: Set correct ranges for internal tracking in return value of days_in_month.

Bug fixes:

• #59: Fixes a bug where some Spans could not be roundtripped through ISO 8601.
• #71: Tweak wording in documentation of "printf"-style API.
• #73: Make it so %.Nf only formats to N decimal places.
• #77: Disable optimizations when running tests.

0.1.4 (2024-08-01)

This release includes a small improvement for strptime that permits %Y%m%d to parse 20240730 correctly.

Enhancements:

• #62: Tweak strptime so that things like %Y aren't unceremoniously greedy.

0.1.3 (2024-07-30)

This release features support for wasm32-unknown-unknown. That is, when Jiff's new js crate feature is enabled, Jiff will automatically use JavaScript APIs to determine the current time and time zone.

Enhancements:

• #58: Add WASM support and a new PLATFORM.md guide.

0.1.2 (2024-07-28)

This release features a few new APIs that a need for arose while experimenting with actually using Jiff in real projects. Namely, the jiff::fmt::strtime module now has %f and %.f directives for parsing and formatting fractional seconds. And both jiff::fmt::rfc2822 and jiff::fmt::strtime now have support for skipping weekday checks during parsing. (Previously, Jiff required that an English weekday be consistent with the date parsed, and there was no way to opt out. While this is still the default behavior, callers can disable this check.)

Enhancements:

• #52: Improve documentation for Span getter methods.
• #53: Add support for skipping weekday checking when parsing datetimes.
• #55: Add support for fractional seconds in jiff::fmt::strtime.

Bug fixes:

• #49: Fix informational regex describing ISO 8601 format.
• #51: Explicitly allow new deny-by-default lint ambiguous_negative_literals.

0.1.1 (2024-07-25)

This is a new semver compatible release. The principle addition are APIs for converting between a jiff::Span and a std::time::Duration. Specifically, there are now TryFrom<Span> for Duration and TryFrom<Duration> for Span trait implementations. There is also a Span::to_duration, which requires a relative date, for converting spans with non-uniform units (like months) to a Duration.

Enhancements:

• #21, #40: Adds APIs for converting between Span and std::time::Duration.

Bug fixes:

• #36: Saturating arithmetic for Timestamp panics with day-or-greater units.
• #38: Fix some bugs in the micro-benchmarks.
• #39: Document that the RFC 2822 parser is not technically fully spec compliant.

0.1.0 (2024-07-21)

The initial release of Jiff.