Merge pull request #51 from mattallen37/master

Add example for two grove ultrasonic sensors

Software/Python/Examples/Grove_US2.py

@@ -0,0 +1,59 @@
+#!/usr/bin/env python
+#
+# https://www.dexterindustries.com/GoPiGo/
+# https://github.com/DexterInd/GoPiGo3
+#
+# Copyright (c) 2017 Dexter Industries
+# Released under the MIT license (http://choosealicense.com/licenses/mit/).
+# For more information see https://github.com/DexterInd/GoPiGo3/blob/master/LICENSE.md
+#
+# This code is an example for using the grove ultrasonic sensor with the GoPiGo3.
+#
+# Hardware: Connect a grove ultrasonic sensor to port AD1 and another to port AD2 of the GoPiGo3.
+#
+# Results: When you run this program, the distance measured with the ultrasonic sensors should be printed.
+
+from __future__ import print_function # use python 3 syntax but make it compatible with python 2
+from __future__ import division       #                           ''
+
+import time     # import the time library for the sleep function
+import gopigo3 # import the GoPiGo3 drivers
+
+GPG = gopigo3.GoPiGo3() # Create an instance of the GoPiGo3 class. GPG will be the GoPiGo3 object.
+
+sensor1 = 0
+sensor2 = 0
+
+try:
+    # configure both ultrasonic sensors
+    GPG.set_grove_type(GPG.GROVE_1, GPG.GROVE_TYPE.US)
+    GPG.set_grove_type(GPG.GROVE_2, GPG.GROVE_TYPE.US)
+
+    # wait for the sensors to get configured
+    time.sleep(0.05)
+
+    while(True):
+        # try reading sensor 1
+        try:
+            sensor1 = GPG.get_grove_value(GPG.GROVE_1)
+        except gopigo3.SensorError as error:
+            pass
+
+        # try reading sensor 2
+        try:
+            sensor2 = GPG.get_grove_value(GPG.GROVE_2)
+        except gopigo3.SensorError as error:
+            pass
+
+        # print the sensor values
+        print("Sensor 1: %4dmm   Sensor 2: %4dmm" % (sensor1, sensor2))
+
+        # slow down a little
+        time.sleep(0.05)
+
+except KeyboardInterrupt: # except the program gets interrupted by Ctrl+C on the keyboard.
+    GPG.reset_all()       # Unconfigure the sensors, disable the motors, and restore the LED to the control of the GoPiGo3 firmware.
+
+except Exception, e:
+    print(e)
+    GPG.reset_all()