TangNano-9K-example

• TangNano-9K-example
  • Question
    • Error Code RP2017
  • Examples
    • led
    • lcd_led
    • lcd_4.3
    • picotiny
    • hdmi
    • spi_lcd

Question

Error Code RP2017

When you meet error code PR2017. Do what is shown below.(Just enable corresponding IO as regular IO)

Examples

led

Demo project for drive LED and on board led. LED guide is at https://wiki.sipeed.com/hardware/en/tang/Tang-Nano-Doc/examples.html

lcd_led

Demo project for drive RGB LCD and on board led, to drive the 5 inch RGB screen with 800*480 resolution.

lcd_4.3

Demo project for drive RGB LCD and on board led, to drive the 4.3 inch RGB screen with 480*272 resolution.

picotiny

A PicoRV32-based SoC example with HDMI terminal from SimpleVout, SPI Flash XIP from picosoc, and custom UART ISP for flash programming. UART baudrate default at 115200.

See README.md for detailed description.

• Visit https://wiki.sipeed.com/hardware/en/tang/Tang-Nano-9K/examples/picorv/picorv.html to quick run this example
• 中文访问 https://wiki.sipeed.com/hardware/zh/tang/Tang-Nano-9K/examples/picorv/picorv.html 来快速使用

hdmi

Project based on picotiny example, but all soft_core related codes are removed.

spi_lcd

This is an example to drive the 1.14 inch lcd screen which can connect with this board.

Be sure match board with screen in the same order