Installation

In slm.toml add:

power-systems = { git = "JITx-Inc/power-systems", version = "0.5.0" }

filters

unbalanced-filter

Construct an unbalanced filter with power inputs/outputs

This module creates an unbalanced filter, typically used with a ferrite, resistor, or other 2-pin device.

An unbalanced filter places one device in series with the V+ rail. The V- is directly coupled from input to output.

inst filt-VPLL : unbalanced-filter(passives/ferrite/BLM18KG(220))

ports

  port vin : power
  port vout : power

Parameters

• comp:Instantiable - Component that will be instantiated to create the filter. This component is expected to be a two-pin device. If this device is polarized then the anode a is connected to vin and the cathode c is connected to vout by default. --
• flip:True|False = false If this parameter is true, the instantiated component is flipped - c connects to vin and a connects to vout.

diode-OR

Construct a diode-OR of multiple inputs

  inst OR : power-systems/filters/diode-OR(diodes/SSA33L/component, 3)

ports

  port vin : power[num-inputs]
  port vout : power

Parameters

• comp:Instantiable - Component that will be instantiated to create the filter. Same attachment behavior as unbalanced-filter
• num-inputs:Int - how many inputs into the diode-OR circuit