A photobooth application for the Raspberry Pi and the Pi Camera Module.
Navigation
The application has been tested and works on the following configuration:
All three products come with the necesarry pieces to connect them together.
This application has not been tested on other hardware, but I am open to pull requests adding support for them, or simply letting me know this application also works on a different hardware configuration.
- Install a new copy of Raspbery Pi OS Lite (64-bit) on your Raspberry Pi's SD-card
- For convenience, you can change the font size of the terminal using
sudo dpkg-reconfigure console-setup - Enable auto-login on boot:
sudo raspi-config- go to System Options
- go to Boot / Auto Login
- Select Console Auutologin
- Install the photobooth software; either build it from soure or download the latest binary
- Start photobooth at boot:
add the following to the end of ~/.bashrc:
# Replace this with the path to your config file (or comment it out to # not apply any configuration) export PH_CONFIG=config.yaml # Replace this with the path to the photobooth executable # This line will start the application Photobooth
- Reboot the pi:
reboot
Pre-compiled binaries can be found in the the latest release.
You can also use this one-liner to download the latest release:
wget \
"$( \
curl -s https://api.github.com/repos/jomy10/photobooth/releases/latest |
jq -r '.assets[] | select(.name=="Photobooth") | .browser_download_url' \
)" -o Photobooth &&
chmod +x PhotoboothThe command requires jq to parse json, which can be downloaded with sudo apt-get install jq
This chapter describes how to compile on the target Raspberry Pi.
# Install dependencies
sudo apt-get update && sudo apt-get upgrade
sudo apt-get install curl
curl -s https://archive.swiftlang.xyz/install.sh | sudo bash
sudo apt-get install swiftlang libcamera-apps libcairo2-dev libjpeg-dev
# Get the source code
git clone --recurse-submodules https://github.com/jomy10/photobooth
cd photobooth
# Compile the code
CONFIGURATION=release ./make.sh build
# The application is now located at .build/release/PhotoboothThe PH_CONFIG environment variable can be set to point to a config file. An
example of this file:
# Logs will be written out to this file
loggingPath: "photobooth_log.txt"
# Images will be saved in this folder
imagePath: "images"
# These will be displayed after an image has been taken
doneSentences:
- All done!
- Curious to see the result?
# Background color of the application
# AARRGGBB
bgColor: 0xFF00FF00You can add the following script to your home directory (in this example in save_log.sh):
if [ -f photobooth_log.txt ]; then
if [ -f photobooth_log_prev2.txt ]; then
rm photobooth_log_prev2.txt
fi
if [ -f photobooth_log_prev.txt ]; then
mv photobooth_log_prev.txt photobooth_log_prev2.txt
fi
mv photobooth_log.txt photobooth_log_prev.txt
fiMake it executable:
chmod +x save_log.shThen add the following line to cron using crontab -e:
@reboot /home/photobooth/save_log.shPhotobooth: Photobooth software for touch screen devices
Copyright (C) 2024 Jonas Everaert
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see https://www.gnu.org/licenses/.
Dependencies may be licensed differently:
- cairo_jpeg: GNU LGPLv3
- libdrm: MIT
- swift-graphics: MIT
- swift-cairo: MIT
- swift-utils: MIT
- Yams: MIT