The purpose of this project is to enable composer to install Magento modules, and automatically integrate them into a Magento installation.
We strongly recommend you to also read the general composer documentations on getcomposer.org
Also you should see Using composer correctly (confoo) by Igor Wiedler
This project only covers the custom installer for composer. If you have problems with outdated versions, need to install magento connect modules or similar, you need to look for packages.firegento.com
If you have problems please have patience, as normal support is done during free time.
If you are willing to pay to get your problem fixed, communicate this from the start to get faster responses.
If you need consulting, support, training or help regarding Magento and Composer, you have the chance to hire one of the following people/companies.
- Daniel Fahlke aka Flyingmana (Maintainer): flyingmana@googlemail.com @Flyingmana
- brandung - Magento Team: magento-team@brandung.de (http://brandung.de)
- Your Name here
- Your Name here
- Your Company Name here
- Your Company Name here
other support contacts
- irc: freenode the channels #magento-composer #magento-reddit and for german speaking people #magento-de
- twitter: @firegento
- Error message:
Fatal error: Call to undefined method MagentoHackathon\Composer\Magento\Installer::setDeployManager()happens when you update from 1.x to 2.x, as we switched from pure installer to plugin.
The update from 1.x to 2.x has to be done with no plugins as otherwise a fatal error will be triggered (which does not hurt, just run the update again and it runs through).
- Error message:
Fatal error: Call to undefined method MagentoHackathon\Composer\Magento\Installer::setDeployManager()
To prevent this error, upgrade only magento-composer-installer first:
composer update --no-plugins --no-dev "magento-hackathon/magento-composer-installer"
Fallback Solutions:
- execute
composer installtwo times. - remove the
vendordirectory andcomposer.lockand do a fresh install.
Mostly caused by outtages of Github, Repositories or the Internet. This is a common problem with having all packges remote.
For all of this Issues you can make use of the commercial Toran Proxy. It also allows hosting of private packages and speeds up the whole downloading process.
Another alternative is to look into Satis, bare git mirrors and repository aliasing.
Another way to speedup downloads over ssh(also interesting for satis users) is to improve your ssh configs.
At least for newer versions of openSSH you can add the following to your .ssh/config to reuse previous connections.
Host *
ControlPath ~/.ssh/controlmasters/%r@%h:%p
ControlMaster auto
ControlPersist 10m
also you need to create the controlmasters directory:
mkdir ~/.ssh/controlmasters
chmod go-xr ~/.ssh/controlmastersfurther information can be found on wikibooks
See below for a generic instruction on how to install composer if you aren't familiar with it.
If you want to setup your project from the scratch, you can require the magento/core package from the public Magento module repository and have your magento-root-dir set up automatically. It is essential that the Magento core packages type is defined as "magento-core" (as given on magento/core).
{
"require": {
"magento/core": "1.9.0.1"
},
"repositories": [
{
"type": "composer",
"url": "http://packages.firegento.com"
}
],
"extra":{
"magento-root-dir": "htdocs/"
}
}If you want to use the public Magento module repository,
set up your root composer.json in your project like this:
{
"require": {
"your-vendor-name/module-name": "*",
"magento-hackathon/magento-composer-installer": "*"
},
"repositories": [
{
"type": "composer",
"url": "http://packages.firegento.com"
}
],
"extra":{
"magento-root-dir": "htdocs/"
}
}If you want to use a github/git/svn/etc repository,
set up your root composer.json in your project like this:
{
"require": {
"magento-hackathon/magento-composer-installer":"*",
"the-vendor-name/the-module-name": "*"
},
"repositories": [
{
"type": "vcs",
"url": "https://github.com/magento-hackathon/magento-composer-installer"
},
{
"type": "vcs",
"url": "the/github/or/git/or/svn/etc/repository/uri-of-the-module"
}
],
"extra":{
"magento-root-dir": "htdocs/"
}
}Notes:
- More information about VCS repositories can be found at getcomposer.org
sometimes it will happen, that you change the name or the vendor of a package.
For example you developed a module in your own namespace and later moved it to an organization, or you moved it
from one to another organization.
In this cases you should change your composer.json a bit to make it for users easier.
Look for the replace statement
{
"name": "your-new-vendor-name/module-name",
"type": "magento-module",
"license":"OSL-3.0",
"description":"A short one line description of your module",
"authors":[
{
"name":"Author Name",
"email":"author@example.com"
}
],
"replace": {
"your-vendor-name/module-name":"*"
}
}By default all magento-modules packages will be installed in the configured "vendor-dir" (which is "vendor" by default). The package name will be used as a directory path and if there is a "target-dir" configured this will also be appended. This results in packaged being installed in a path like this one: vendor/colinmollenhour/cm_diehard.
Originally modman packages "live" in a directory called ".modman". This directory can be inside your htdocs directory, next to it or where ever you want it to be.
If you want magento-composer-installer to install your Magento extensions in a custom location, this can be configured as follows:
{
...
"extra":{
"magento-root-dir": "htdocs/",
"modman-root-dir": ".modman"
}
...
}Make sure the .modman directory exists before updating. There is a fallback in place that will try to find the directory relative to your vendor dir if it wasn't found in the first place.
If you want to still use the original modman script, too, and if your modman-root-dir configuration is not "htdocs/.modman" you'll need a ".basedir" file inside ".modman" that specifies where to find the htdocs folder (see the modman documentation)
Should you choose to only use the original modman script to deploy packages, you will not want to have the magento-composer-installer deploy the packages. So this can be disabled:
{
...
"extra":{
"magento-root-dir": "htdocs/",
"modman-root-dir": ".modman",
"magento-deploystrategy": "none"
}
...
}If you want to have the deployed files automatically added to your .gitignore file, then you can just set the auto-append-gitignore key to true:
{
...
"extra":{
"magento-root-dir": "htdocs/",
"auto-append-gitignore": true
}
...
}The .gitignore file will be loaded from the current directory, and if it does not exist, it will be created. Every set of module files, will have a comment above them
describing the module name for clarity.
Multiple deploys will not add additional lines to your .gitignore, they will only ever be added once.
First clone the magento-composer-installer, then install the dev-stuff:
./bin/composer.phar install --dev
then run vendor/bin/phpunit in project-root directory.
Note: Windows users please run phpunit with Administrator permissions.
We don't want to use always the official repositories for specific dependencies. For example for development purpose or use versions with custom patches.
For this case you have the repositories section inside your project composer.json Here you can define own package composer.json for specific dependencies by the package name.
This example shows how to use a local git projects local-master branch which even works without a composer.json inside and a project in VCS with existing composer.json, which is not yet on packagist.
{
...
"repositories": [
{
"type": "package",
"package": {
"name": "magento-hackathon/magento-composer-installer",
"version": "dev-master",
"type": "composer-installer",
"source": {
"type": "git",
"url": "/public_projects/magento/magento-composer-installer/",
"reference": "local-master"
},
"autoload": {
"psr-0": {"MagentoHackathon\\Composer\\Magento": "src/"}
},
"extra": {
"class": "\\MagentoHackathon\\Composer\\Magento\\Installer"
}
}
}
]
}Go to your project root directory and run:
mkdir bin
curl -s https://getcomposer.org/installer | php -- --install-dir=bin
Please take a look at http://getcomposer.org/doc/00-intro.md#installation-windows
Creation of symbolic links requires the SeCreateSymbolicLinkPrivilege (“Create symbolic links”), which is granted only to administrators by default (but you can change that using security policy).
To change the policies:
- Launch secpol.msc via Start or Start → Run.
- Open Security Settings → Local Policies → User Rights Assignment.
- In the list, find the "Create symbolic links" item, which represents SeCreateSymbolicLinkPrivilege. Double-click on the item and add yourself (or the whole Users group) to the list.
See Usage.
php bin/composer.phar install
- FAQ
- Make a Magento module installable with composer
- About File Mapping like for example modman
- About Deploying files into your Magento root and possible configs
- Composer How to Screencast
- Introducing Composer Blog on Magebase.com
- Magento, Composer and Symfonys Dependency Injection
- Using Composer for Magento(at engineyard)
- Daniel Fahlke aka Flyingmana (Maintainer)
- Jörg Weller
- Karl Spies
- Tobias Vogt
- David Fuhr
- Amir Tchavoshinia
- Vinai Kopp (Maintainer)
There are a few companies we want to thank for supporting this project in one way or another.
Teached me(Flyingmana) most I know about Magento and paid my participation for the hackathon were the installer got created.
#####melovely
Support me(Flyingmana) as my current employer very much in my work on everything composer related.