v1.21

We are excited to announce the release of version 1.21 of the ESP32 FM Tuner! This release includes the following new features and improvements:

Changelog:

• Added signal in dBm when the user is connected to Wi-Fi
• Wi-Fi icon rework (now the Wi-Fi icon will show whether you're connected to a network / XDR-GTK separately)
• Battery status updates without reboot, if you're not using Wi-Fi
• Signal should jump way less when a neighbour frequency is too strong
• XDR-GTK graph is now way smoother (similar to XDR F1HD)
• A TP indicator has been added next to PTY info
• Battery voltage calculation has been recalibrated (bugs may still occur)
• A new battery check has been added, which checks if the user has a battery connected or not
• The RT is now scrolling
• 2 new themes (Whiteout & Heaven)
• Fixed various graphical glitches

Installation

1. Press "WIN+R" and open devmgmt.msc
2. Under the section "COM & LPT", you will see your tuner - mark down the COM port, you will need it later
3. Edit the flash.bat file and edit the "COM" port to the number you see in devmgmt.msc
4. Hold the BOOT button on your TEF6686 ESP32 board while starting the tuner, that will put it into the bootloader mode
5. Open flash.bat and wait until the proccess finishes
6. Start the tuner - that's it!

We hope these changes will improve your experience with the ESP32 FM Tuner. As always, please let us know if you have any feedback or encounter any issues.

❤️ Thank you for your support! ❤️

v1.20

We are excited to announce the release of version 1.20 of the ESP32 FM Tuner! This release includes the following new features and improvements:

Changelog:

• Fixed the rotary button so it doesn't activate twice
• New theme engine
• Added a second menu (hold blue button to activate)
• Added battery voltage/percentage info
• Readded XDR-GTK support for chinese tuners
• Added XDR-GTK support over wifi
• New dBf/dBuV switch
• Changed the bandwidth refresh timer
• Changed the default FM step to 100 kHz
• New switch for RDS info (the user can now choose if the info should disappear on low signal)
• Changed the PTY of "Variable" to "Varied"
• A new switch for screen shutdown on XDR-GTK

Installation

1. Press "WIN+R" and open devmgmt.msc
2. Under the section "COM & LPT", you will see your tuner - mark down the COM port, you will need it later
3. Edit the flash.bat file and edit the "COM" port to the number you see in devmgmt.msc
4. Hold the BOOT button on your TEF6686 ESP32 board while starting the tuner, that will put it into the bootloader mode
5. Open flash.bat and wait until the proccess finishes
6. Start the tuner - that's it!

We hope these changes will improve your experience with the ESP32 FM Tuner. As always, please let us know if you have any feedback or encounter any issues.

❤️ Thank you for your support! ❤️